Dissertation > Excellent graduate degree dissertation topics show

Research on Automotive System Electromagnetic Compatibility Diagnosis Based on Fault Tree Analysis Method

Author: Liang
Tutor: QiuYang
School: Xi'an University of Electronic Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: EMC Fault-Tree Basic-Event interference frequency VehicularSystem
CLC: TN03
Type: Master's thesis
Year: 2012
Downloads: 79
Quote: 2
Read: Download Dissertation

Abstract


As a complex electronic system, vehicle system has an extremely prominent problem of electromagnetic compatibility, and it is very important to carry out the fault diagnosis for this problem. Due to the complexity structures of system, the great number of impact factors and the dense relationship between individual subsystems, so the diagnosis of the fault for more complex problems require a combination of some specific fault diagnosis method in order to meet the actual use requirements.In this paper, electromagnetic compatibility of vehicle system is the research objective. Base on the principles of fault tree establishment, fault disturbed of the system within a radio is the top event. The conducted interference and radiated interference in vehicle system can be subclass according to the three elements of EMC analysis method. Respectively find middle event and basic event of the fault tree, and establish electromagnetic interference fault tree by logic relationship. Using Boolean algorithm to find the minimal cut sets of interference, optimize the cut sets by combing with work experience and the actual situation of the failed probability of the end event, and the most likely minimal cut sets of electromagnetic interference would be got. Finally, according to the minimal cut sets and the analysis results for each intermediate links, the fault diagnosis can be carrying out. This approach significantly reduces testing on the project process, shorten the design cycle, making the analysis results that are more valuable, reliable and clear, increase the efficiency of fault diagnosis for electromagnetic compatibility.The fault tree method applied to the diagnosis of EMC in this paper, it provides a theoretical basis and practical methods for electromagnetic compatibility diagnostics. Finally, combined with practical engineering experience or huge amounts of data, EMC failure analysis get a more clear and precise analytical results.

Related Dissertations

  1. Design and Fault Diagnosis of the Coarse Pointing Control System in Satellite Laser Communication,V443.1
  2. Study on RFID Techniques in the Manufacture of Used in Automobile Ignition Coils,TP391.44
  3. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  4. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  5. BOT financing risk assessment method based on fault tree study,F283
  6. Reliability Analysis Software Development Based on Fault Tree,TP311.52
  7. Reliability of Ventilation System Based on Failure Modes, Effects Analysis Andfault Tree Analysis,TD724
  8. Micro- array filter connector plate moments chip design,TN402
  9. The Realization of a Reinforced Tablet Computer Based on Intel Oak Trail Platform,TP368.3
  10. Research on the Effect of Chinese Interest Rate Adjustment to the Stock Price,F224
  11. Research on the Risk Evaluation and Classification Technology on the Dam Failing of Tailing Ponds,TV122.4
  12. Study on Intelligent Diagnosis of Measuring Radar,TN957
  13. Safety Assessment of Coal Gangue Hazard and Analysis of the Greening Reclamation,TD849.5
  14. Electromagnetic Compatibility Design of Synthesis Communications Vehicle,TN03
  15. Design of Digital Walkie-talkie Base Band Module Circuit and It’s EMC,TN929.54
  16. 150MHZ\400MHZ Band Dedicated Interphone Frequency Planning and Assignment Research of Guangdong Province,TN929.54
  17. Precision receiver design simulation tester,TN957.5
  18. The Design of Laptop Computer Main Board Based on Intel Calpella Platform,TP368.32
  19. EMC Design of Radio Telescope Antenna Main Reflector Active Adjustment System,TH743
  20. Research on Testing and Diagnostic Method for Reducing the Risk of TCAS,V244.11
  21. Electromagnetic Compliance Design in Multifunction Radio Digital Communication Terminal,TN03

CLC: > Industrial Technology > Radio electronics, telecommunications technology > General issues > Structure
© 2012 www.DissertationTopic.Net  Mobile