Dissertation > Excellent graduate degree dissertation topics show

Fabrication of High Power GaN-based LED Chip

Author: WuYueFeng
Tutor: WangHong; HuangHuaMao
School: South China University of Technology
Course: Optics
Keywords: LED chip Light extraction efficiency Distributed Bragg Reflector Metal reflector
CLC: TN312.8
Type: Master's thesis
Year: 2013
Downloads: 61
Quote: 0
Read: Download Dissertation

Abstract


Light emitting diode(LED) is becoming a new generation of light source fortraditional light industrial upgrade by virtue of its high efficiency and lowconsumption, green and non-polluting, short response time and so on. Theimprovement of light extraction efficiency of LED chip is an important issue to besolved in LED lighting universal application. This paper begins with how to improvethe light extraction efficiency of the chip, combined with existing preparationtechnology, and high-performance and high-power GaN-based LED chip is prepared.Based on the problems of non-uniform current spreading and instableoptoelectronic properties of the high-power LED chips, the size of45mil*45milhigh-performance GaN-based LED chip is prepared. The results show that the opticalpower of the chip reaches374.35mw under a drive current of350mA. The voltageand the optical power gradually increase with the increase of the drive current and theoptical power does not decline within the scope of the changing current. It shows thatthe45mil*45mil chip prepared has stable optical and electrical properties. The surfaceof the chip emits uniformly under a current of20mA, which indicates that the currentspreads evenly. Based on the influence of the side GaN in the cutting process o f thelaser energy, a flattening edge structure of the GaN-based LED chip is prepared bythermal acid process and the result shows that the light output power improves by8.65mw.Based on the DBR structure of the conventional high-power chip manufacturingprocess having a high reflectance only in the case of small angle or vertical incident,an omni-directional metal reflector is designed and the light output power of this kindof chip improves by19.2mw compared with conventional DBR structure.For the problem of high light extraction efficiency, the output efficiency oftraditional horizontal GaN-based45mil*45mil chip simulated when the Mesa sidewallof the chip is trapezoidal and inverted trapezoidal structure. The results show that theoutput efficiency reaches31.433%when the Mesa sidewall of the chip is trapezoidal structure and the slanted angle is the critical angle of the GaN and the air interface.And the output efficiency improves by25.5%compared to the vertical-shapedstructure chip of the lateral structure. And also the trapezoidal Mesa sidewall of thechip is obtained by ICP etching.

Related Dissertations

  1. Theoretical and Experimental Study of Monolithic White Light LED Based on DBR,TN312.8
  2. Packaging Light Extraction Efficiency Enhancement of LED Array Packaging with Various Micro-structures,TN312.8
  3. Electromechanical Co-simulation and Experimental Verification for Swing Arm of High-Speed LED Chip Sorting Machine,TN405
  4. Design of High Power GaN-based Light-emitting Diodes,TN312.8
  5. GaN-based light-emitting diode light extraction analysis and simulation,TN312.8
  6. Designs and Simulations of GaN-based LED with Monte Carlo Photon-tracing Method,TN312.8
  7. Enhanced Light Extraction Efficiency of LEDs by Using Photonic Crystal and Omni-directional Reflector,TN312.8
  8. Project Planning Book for Chengdu KeJin Science & Technology Ltd.,F426.63
  9. Analysis and Preparation of Novel Gan-based Light-Emitting Diode Chip,TN312.8
  10. Investigation on Photonic Crystal with Tunable Refractive Index and Experimental Chatacteristics,O734
  11. Research on Fabrication of Photonic Crystals by Nanoimprint Lithography and Its Application,O734
  12. Investigation on Light Extraction Efficiency Enhancement of GaN-based Light-emitting Diodes by Nanostructure and Microstructure,TN312.8
  13. The Research on the Improvement of Lighting Efficiency of LED by Surface Plasmon Technique,TN312.8
  14. Study on the Fabrication and Characteristics of Vertical-Cavity Surface-Emitting Lasers,TN248
  15. Design and Fabrication of High Luminous Efficiency GaN-based LED Chip,TN312.8
  16. The Research on Enhancing the Light Extraction Efficiency of GaN-LED by Nano Microlens Surface Structure in Subwavelength Fiele,TN312.8
  17. Research on Wavelength-Selective Photodetectors for Dense Wavelength Division Mutiplexing (DWDM) Systerm,TN929.11
  18. Based on fiber-coupled laser self- mixing interference effect,TN248
  19. Study on Active Fiber Grating Sensing Technology,TP212
  20. Design and Fabrication of 1310nm Vertical-Cavity Surface-Emitting Lasers,TN248
  21. The Study on Control of Monolithic Tunable Semiconductor Lasers,TN248.4

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Semiconductor technology > Semiconductor diode > Diodes: structure and performance > Light-emitting diodes
© 2012 www.DissertationTopic.Net  Mobile