Dissertation > Excellent graduate degree dissertation topics show

Study on Servo System of Tracking Radar Antenna

Author: ZhangDongYun
Tutor: WangSiMing
School: Lanzhou Jiaotong University
Course: Control Theory and Control Engineering
Keywords: Radar servo system Brushless DC motor Three closed loop control Sliding mode variable structure control
CLC: TN953
Type: Master's thesis
Year: 2013
Downloads: 5
Quote: 0
Read: Download Dissertation

Abstract


Servo system is a main part of tracking radar. The accuracy in servo system directlyaffects the tracking precision of radar. With continuous development of power electronicstechnology, sensor technology and motor control theory, and with constant progress ofhigh-performance digital signal processor technology, the radar servo drive equipment ischanging from DC to AC, and the servo control system is changing from analog to digitalsystem. The advanced control theory has been applied to servo system. All these have laid thefoundation for development of high-performance radar servo system.During mechanical scanning radar tracking target, the elevation motor and azimuthmotor is used to control radar antenna turning, adjust the antenna to point at target. As theprinciple of elevation motor and azimuth motor is similar, the azimuth servo control system ismainly studied in the thesis. The brushless DC motor is used as driving motor in the thesis,the model of servo system is established according to the radar antenna servo system, thedesign approach of radar three closed loop servo system is studied, and the performance of theradar control algorithm is mainly analyzed in the way of guiding work mode. The frequencyresponse curve of three-loop is drawn, and the position and speed response curve is giventhrough simulation. Results show that, the three loop servo system designed with seriescorrection approaches is stable. The traditional PID controller parameters is adjusted in thesystem parameter perturbation and external interference, and the sliding variable structurecontroller insensitive to the parameter perturbation and external interference, so slidingvariable structure control is adopted in the position loop. Through the analysis, slidingvariable structure control exists a certain chattering. Neural network can approach the linearor nonlinear system. The combining method of neural network and sliding variable structurecontrol is applied to inhibit the chattering. The simulation results shows that the neural slidingmode variable structure controller has the advantage of the general sliding mode variablestructure control, meanwhile, it has a good performance for reducing chattering.The hardware mainly includes control circuit which based on TMS320F2812and motordrive circuit. The controller is mainly used to realize control operation, data process and A/Dprocess. MOSFET is used to build full bridge inverter circuit in the drive circuit that mainlyrealizes isolation, inverter, and driving function. The main circuit schematic diagram and thesoftware designing process is given. Experimental results show that the control circuit anddrive circuit can realize the control of brushless DC motor servo system.

Related Dissertations

  1. Research on the Controling of Pilot Drill in Dental Implantation,R783.6
  2. Research on Torque Ripple Minimization Techniques for Permanent Magnet Brushless Dc Motor,TM33
  3. Research on Control System of Quad-Rotor Aircraft,TM33
  4. Brushless Dc Motor Control System Design Based on the Nonlinear Dynamic PID Neural Network,TM33
  5. Rereach on Improved DTC System Using Sensorless Technology,TM921.5
  6. Ink Quantity Control System of Printing Machine Designing,TS803.6
  7. Brushless DC Motor Control System for Actuator,TM33
  8. Simulation and Realization of Fuzzy Speed Control Based on Model for Brushless DC Motor,TM33
  9. Research of BLDC Speed Control System Used for Thermal Printer,TM33
  10. Radar servo control based on CAN bus coordinated research,TN95
  11. The Studies of Brushless Motor System Design in Antenna Turntable Axis,TM33
  12. Research on Brushless DC Motor Based on Advanced Control Algorithm,TM33
  13. Direct Torque Control of Brushless DC Motor,TM33
  14. Direct drive washing machine drum drive control system design and implementation,TM925.33
  15. Motor Design and Simulation of Charging and Discharging Control of Flywheel Energy Storagye System,TM919
  16. DsPIC based brushless DC motor control system design,TM33
  17. One kind of flat - stair walker device is designed with dual control system research,TU857
  18. Research and Implementation of Automatic Clutch in Hybrid Electronic Vehicle,U463.211
  19. Brushless DC Motor Design and Analysis of Noise,TM351
  20. Brushless DC Motor Based on DSP Control System institutions,TM33
  21. Efficient brushless DC motor control system design and research,TM33

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radar > Radar tracking system
© 2012 www.DissertationTopic.Net  Mobile