Dissertation > Excellent graduate degree dissertation topics show

Design of Electromagnetic Simulation Software CST and HFSS Model Interface Software

Author: LiuBing
Tutor: ShaoXiaoDong
School: Xi'an University of Electronic Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: Microwave technology Electromagnetic simulation Ansoft HFSS CST Parametric design
CLC: TP311.52
Type: Master's thesis
Year: 2013
Downloads: 49
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of microwave technology, the range of applications ofmicrowave devices become more and more widely, and its performance requirementsare also getting higher and higher. In order to satisfy the design requirements, thereemerged a lot of electromagnetic simulation softwares (such as CST, Ansoft HFSS, etc.),but most of the simulation software on the device design and simulation is independentof each other and no phase relevance，and different simulation software simulation getsolution and accuracy is different. If require different solution will have to choosedifferent simulation software to design, this not only makes the designer mustrepeatability model, but also greatly reduces the efficiency of simulation design.This paper mainly studies the design is based on the electromagnetic simulationsoftware CST and Ansoft HFSS, through to learn these two kinds of electromagneticsimulation software, and to research their modeling idea and modeling method, wedevelop and design a new model transformation interface software. The modeltransformation interface software chosen C++Builder6.0as a development tool, first ofall,we according to the functional requirements and the order of operations, arrangedlayout reasonable, and design operation window interface of the model transformationinterface software; and then based on the modeling thought and modeling method ofelectromagnetic simulation software CST and Ansoft HFSS, we put forward a methodof parametric design to achieve model transformation function, the method consists oftwo main parts: parameter parsing and scripting templates; Finally, we to test the designcompleted interface software, and verify its feasibility.The model transformation interface software realizes the model transformationbetween electromagnetic simulation software CST and Ansoft HFSS, to avoidrepeatability modeling, and to maintain the consistency on the shape, size, parameters,properties before and after the model transformation. This not only improves theefficiency of the product development collaboration designed, but also has broadapplication prospects in the field of electromagnetic simulation design.

Related Dissertations

  1. Study of Oil-Immersed Transformer Parametric Design System Based on Feature,TM411
  2. Parametric Design of Flow Channels and Analysis of the Flow Field,TP391.72
  3. Parametric Finite Element Analysis System Development of the Jib of Tower Crane Based on ANSYS,TH213.3
  4. The Designation of Multiple Frequency and Wideband Microchip Antenna for 3G Handset,TN828.6
  5. The Design of Optimal Design System of Micro Axial Flow Fans Based on 3-D Flow Field Analysis,TP306.2
  6. The Research on Key Technologies of Cam Mechanism for Automobile Panel Die,U468.2
  7. A Miniaturized Antenna Based on Hilbert Curve for Wireless Network,TN820
  8. Research on the Virtual Prototype Platform of Disc Coreless Permanent Magnet DC Motor,TM33
  9. Study coaxial microwave dielectric filters,TN713
  10. Study on MgB2 Supperconducting Receiving Coil,O482.531
  11. Simulation and Design of Shaped-beam Waveguide Slot Array Antennas,TN823.24
  12. RFID-Based E-Plate Identification System for Vehicle Management,TP391.41
  13. The Research and Application of Mining Flame Proof Dry-Type Transformer CAD,TP311.52
  14. Research and Application Parametric Design of the Key Parts of EMU Bogie,TP391.72
  15. Kinematics Study of a Novel 3-Dof Translational Parallel Robot Mechanism,TP242
  16. Water ring vacuum pump parametric design and CAD systems development,TB752
  17. Development of Butterfly Valve Parametric Design System and Optimal Design,TH134
  18. Development of the Parameterized Design System for Shell Parts’ Cavity of Mechatronic Insturments with SolidWorks,TH70
  19. Shallow soft rock large span tunnel effect of initial support,U455.7
  20. Research on Parametric Finite Element Analysis and Optimization System of Multiple Leaf Springs,U463.33
  21. Presses conjugate cam mechanism highs closed teeth Performance analysis and parametric design,TS803.6

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer software > Program design,software engineering > Software Engineering > Software Development
© 2012 www.DissertationTopic.Net  Mobile