Dissertation > Excellent graduate degree dissertation topics show

Design and Implementation of DCS Control the Texaco Gasifier Lock Hopper System

Author: ChangLiang
Tutor: Liu; ZuoHongChun
School: University of Electronic Science and Technology
Course: Software Engineering
Keywords: DCS Texaco Gasifier Lock hopper’ accumulating dregs Discharging dregs Washing dregs
CLC: TP311.52
Type: Master's thesis
Year: 2013
Downloads: 11
Quote: 0
Read: Download Dissertation


In the21st century, DCS has entered the fourth generation of DCS, which is widelyused in chemical production, and it is affected by advanced communications,information management and technology, as well as large-scale process equipment.Yankuang Guohong500,000tons methanol project is constructed in2005. The projectuses advanced and reliable coal-slurry gasification, energy-efficient low-temperaturemethanol wash and maturity of the methanol synthesis of the world’s advancedtechnology, and1million tons of high-sulfur coal can be converted,500,000tons ofmethanol can be produced each year.In the device of the Texaco gasifier, accumulating and discharging dregs manuallycan lead to operation errors, even the parking of the gasifier, and affect the systemoutput; another aspect, the frequent slagging increases the operator’s labor intensity,brings operator fatigue, and threatens the safety of production.This thesis develops and designs the system of lock hopper serial control systemwhich can accumulate and discharge dregs in order to solve above problems. Thissystem mainly consists of accumulating dregs,discharging dregs and washing dregs oflock hopper. The development of this system shields all the disadvantages of manualcontrol,and provides a prerequisite for the security and stability of the long period ofthe gasifier operation. The main content of this thesis includes:(1) System requirementsand feasibility analysis: This section includes lock hopper system flowchart,requirements analysis, and feasibility studies;(2) Systems analysis: This section willlock hopper prone manual operation carried out analysis and research, and developed anew automatic operation of the program.(3) System design: it includes three mainfunctional modules:the order in which the lock hopper control systems, lock slagprocess in chronological order, and program design, covering the set slag lock hopper,lock hopper slagging off and lock hopper rinse t.(4) system implement: this partimplements the functional modules one by one based on the content of the design,draws the program flowchart, and then completes the implementation of automaticcontrol system which can actually run the lock hopper sequence. After designing the management system for testing,the four major functional blocks of the lock hopper’accumulating dregs, discharging dregs,washing dregs and security logic control arecompleted basically; one hand,it achieves automatic sequence control, defects ofshielding man-made control, on the other hand,it can control and manage the wholesystem on the basis of the safety logic at any time, and meet the high load, long cycle,stable and optimal operation needs; Finally, this thesis includes summary and outlookof the lock hopper serial control system.

Related Dissertations

  1. Design and Implementation of Oxygenerator DCS Control System,TQ116.11
  2. Pumped Storage Power Plant Accident Exercise and Training System Design,X928.04
  3. Design of Intelligent Supervisory Control System for Wastewater Treatment,TP277
  4. HCL Electrolysis Control System Design and Realization,TP273
  5. Supercritical Unit Coordinated Control System Design and Simulation,TM621.6
  6. Thermal automation systems design, implementation and optimization,TK39
  7. Design and Application of DCS in the Large-scale Vertical Retort,TP273
  8. Application of PCS7 Process Control System in Resin Production,TP273
  9. The Production of Styrene Process Control Based on PCS7,TP273
  10. Design and Research on Control System of Ethylene Rectification Section Based on PCS7,TP273
  11. Petrochemical Tank Storage and Transportation Automation System Design and Implementation,TP277
  12. Research on Maintenance Decision Optimiztion and Risk Analysis for Thermal Power Plant’s DCS,TM621.6
  13. Design and Research of Optimal Control System for Cement Pre-grinding Process,TP273
  14. Network planning technology projects in the DCS optimal allocation of resources in applied research,TU721.3
  15. The Research and Development of Monosodium Glutamate Production Line Based on PCS7 Control System,TP273
  16. Power Plant Auxiliary System DCS Center Connection Network Control,TM621.6
  17. Design and Development of Distributed Intelligent Measurement and Control Module Based on Can Bus,TP273
  18. Marine Automation System,TP277
  19. Controlling System Design and Soft Measurement of Multi-nozzle Mounted Coal Slurry Gasifier,TQ545
  20. Low-E glass production line distributed control system,TP273
  21. Analysis and Execution of MES System in Chemical Plant,TP29-A8

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer software > Program design,software engineering > Software Engineering > Software Development
© 2012 www.DissertationTopic.Net  Mobile