Dissertation > Excellent graduate degree dissertation topics show

Analysis and Design of Degital Design and Manufacturing System of Servo Products

Author: QinZhao
Tutor: LiChaoZuo; FuXiangLing
School: Beijing University of Posts and Telecommunications
Course: Software Engineering
Keywords: servo digital design manufacture integrating structure
CLC: TP311.52
Type: Master's thesis
Year: 2012
Downloads: 57
Quote: 0
Read: Download Dissertation

Abstract


The development process of servo products is of systems engineering of cross-subject. Along with the development of Aerospace technology and more and more development tasks rising, servo products are becoming more and more complex. The period of development and manufacturing is required to be shorter and shorter, products quality higher and higher. To fulfill national tasks and survive in competition, it is a must to realize informationization and digitalization to speed the response to development tasks, to enhance the control ability of processing, to shorten the production period and to improve products quality. Informationization and digitalization are very important methods to motivate productivity development. They are core competition of an enterprise. And they also a key part of the aerospace enterprise develop stratagem.This paper works on servo products design and manufacture integration frame, focusing servo products design and manufacturing integration structure. Analyzing the specialty of servo products development and the organization structure of aerospace enterprises, aiming at where it should be improved within current business processes, learning from advanced digital systems of domestic and oversea, a design proposal of servo products design, development and manufacturing is presented, which makes overall plans for digitalizing in design and manufacturing processes.Through the analysis of the present situation, combined with the digital foundation, for get through the data flow for the design, manufacturing, the effective management of data during product development will be realized. Also traditional research on servo products process is analyzed, the whole process of the development of digital conditions process is proved, the system and four subsystems function requirement is analysis, and the relationship between the four subsystems is discussed. This paper pays more attention on servo products design, manufacture of system integration design process, and analyzes the design, process, production and operation of the process integration between the plan design, it is concluded that the servo products design and manufacture of integrated digital process.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  3. Optimizition of Compositions and Processing Parameters and Wear Properties of Cemented Carbides YG11R Modified by Nanosized Rare Earth,TG135.5
  4. The Research of Women’s Underwear Design Based on Customer’s Emotional Needs,TS941.713.3
  5. Model of Cylinder Controlled by On-Off Valve and System of PWM Control,TH138
  6. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  7. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  8. Research on the Aiming Signal Processing of the Optical Probe Measurement System,TH74
  9. Research on Gyro Stabilized and Tracking Platform,V241.5
  10. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  11. Heat Transfer Performance of the Metallic Honeycomb and Regenerative Cooling Channel,V215.4
  12. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  13. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  14. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  15. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  16. A Study on the Strategy of Accoustic Environment Design of Underground Space Station in the City of China,U231.4
  17. The Ah Chengarchitectural Regeneration Design Research Concerned about the Jin Dynasty Culture,TU984.114
  18. The Research on the Architecture Design of Science and Technology Museum,TU242.5
  19. The Research of Residential Community Design of Vanke Model,TU984.12
  20. An Empirical Study of Contemporary Compehensive Urban Design in China,TU984
  21. The Research on the Design of Waterfront Open Space of Daowai District in Harbin,TU984.113

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer software > Program design,software engineering > Software Engineering > Software Development
© 2012 www.DissertationTopic.Net  Mobile