Dissertation > Excellent graduate degree dissertation topics show

Research on Remote Image Acquisition System

Author: YueChangJin
Tutor: HePing
School: Harbin Institute of Technology
Course: Control Science and Engineering
Keywords: DSP Line scan cameras Multithreading
CLC: TP274.2
Type: Master's thesis
Year: 2011
Downloads: 45
Quote: 1
Read: Download Dissertation

Abstract


The remote image acquisition system uses a combination of server-side and monitor side , both to achieve a real-time snapshot of a particular place screen with remote transmission , but also to achieve a friendly man-machine interface in VC 6.0 environment . Monitoring terminal is divided into the part of the host machine and lower machine part , the host computer parts and server-side by a PC , the lower machine controller chips, optional TI's TMS320F2812 . For substantial acquisition screen , image acquisition equipment selection DALSA line scan cameras . The working process of the system : the first server-side PC and remote Internet monitoring client PC , monitor, end DSP2812 responsible for DALSA line scan camera control , including the provision of a shooting trigger control signal and shooting start control signal . Host machine and DALSA line scan cameras via RJ45 Ethernet interface connected both after the connection is established , the PC can DALSA line scan camera collected image processing . Has been established at both ends of the Internet , after the processed image is sent over the network to the server , the entire process by the end of the server-side remote control monitor image acquisition and transmission , this function is accomplished through a multi-threaded . The article is divided into the following major parts: the first chapter of the image acquisition of the status quo and development trend overall , and then introduced the main content of the subject and research methods . The second chapter describes the overall design of the system , including monitoring client and server-side hardware and software implementations . The third chapter details the hardware part of the concrete realization of monitoring end lower machine . The fourth chapter describes the method of monitoring end lower machine software part of the implementation . Chapter a The DALSA camera IP setting method and associated data detailed description of the host computer and the server-side monitoring client program based on VC 6.0 . The subjects completed the hardware and software system design and debugging under laboratory conditions , good performance , and achieved the expected goals .

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  5. Research on Synchronous Motor Excitation Control System,TM341
  6. The AES Algorithm and Its Implementation in DSP,TN918.1
  7. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  8. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  9. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  10. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  11. Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
  12. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  13. A Study on the Technology of the Infrared Image Matching,TP391.41
  14. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  15. Development of Vxibus Common Interface Module Based on DSP,TP274
  16. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  17. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
  18. Laser alignment system posture measuring device developed,TN24
  19. ATV vehicle weapon control system,TP273
  20. Design of VoIP Gateway Based on DSP,TN916.2
  21. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile