Dissertation > Excellent graduate degree dissertation topics show

Analysis of the Similar-Scara Parallel Manipulator with Mobile Platform Rotating Continuously

Author: JiangNing
Tutor: ZhangJianJun
School: Hebei University of Technology
Course: Mechanical Engineering
Keywords: wafer handling robot body configuration screw theory freedom analysis kinematic analysis dimensional synthesis dynamic analysis
CLC: TP242
Type: Master's thesis
Year: 2011
Downloads: 21
Quote: 0
Read: Download Dissertation

Abstract


In this article, a three-DOF parallel manipulator with mobile platform rotating continuously is proposed, which is based on the trends of wafer handling robots. After the institutional constructed, it deals with its degrees of freedom, kinematic analysis, dimensional synthesis, dynamic analysis and some other key technologies. It provides a theoretical basis for the design and platform construction of wafer handling robots prototype, the main contents are as follows.Firstly, through the analysis of the demands for wafer handling robot in IC industry and combining with the advantages and disadvantages of series-parallel robot, it studies a new wafer handling robot which structure is parallel (it named for the similar-SCARA parallel manipulator with mobile platform rotating continuously). Compared with the traditional parallel manipulators, the peculiarities are that the three limbs are embedding together and the mobile platform can achieve 360 degree rotation continuously. Besides, it can translate along a leader-rail in radial direction. Based on screw theory, it writes the screw system of each limb and then obtains the corresponding anti-screw. Finally, it calculates the degrees of freedom by using G-K formula which has been modified and completes the configuration of institutions.Secondly, we established the position, velocity, acceleration model of the parallel loop body in the cylindrical coordinate, then analyses its singularity position and simulates the position, velocity and acceleration of the manipulator’end, the result of simulation showed the variation of it. Considering both the mean value and fluctuation of the condition number of Jacobian matrix, a global conditioning index is proposed. Meanwhile, a set of constraints has been built and given the initial value. We get rod length witch satisfies the constraints by MATLAB and verify the correctness of the optimization.Thirdly, based on the analysis of the kinetic and potential energy of each component, the dynamic model of mechanism is established and some necessary simulations are carried out by using the Lagrange equation , finally we can get the variation of the torque which is driven by servo motors.

Related Dissertations

  1. The Study of Dynamic Simulation of the Passive Dynamic Quasi-Quarupedal Walker,TP242.6
  2. The Effectr of Lactic Acid Bacteria and Rice Bran on Dynamic Change of Rice Straw Silage Fermentation,S816.53
  3. Isolationand Identification of Porcine Parvovirus and Parts of Its Biological Characteristics,S852.65
  4. Study of Static and Dynamic Collaborative Optimization on Container Ship Structure,U674.131
  5. Study on Mechanical Characteristic of Rubber Spring Used in Vibrating Screen,O322
  6. Reliability-based Sensitivity Research on Multi-span Rotor System,TH113
  7. The Gait Research of Teaching Hexapod Robot,TP242
  8. The Design of Upper Limb Rehabilitative Robot and the Motion Planning,TP242
  9. Dynamic analysis based on multi-core acceleration method,TP332
  10. Deep-sea umbilicals dynamic response and reliability of bending enhancer,P756.1
  11. Minimally invasive surgery sampling multi-DOF robot research,TP242
  12. Cone crusher crushing force squeeze Modeling and Simulation Analysis,TD451
  13. AVIC International Plaza Building, structural stability analysis,TU973.2
  14. Magnet contactor design and analysis of static and dynamic characteristics,TM572.1
  15. Detection and Analysis of Malware Network Behavior Based on Isolation Environment,TP393.08
  16. Seismic Response Analysis of Continuous Frame Bridge with V Piers,U441.3
  17. Research and realization of dynamic performance analysis of code in the embedded environment,TP368.1
  18. Dynamic Analysis of Soils under Moving Load,TU435
  19. The Mechanism Design and Kinematic Simulation of the Auto-Lap-Changing and Auto-Piecing Device in Combing Machine,TS103.225
  20. Optimization of Structural Parameters and Analysis of Dynamic Characteristics of Micro Machine Tool,TG502.31
  21. Research on the Square RAM Deformation Processing and Compensation,TG548

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot
© 2012 www.DissertationTopic.Net  Mobile