Dissertation > Excellent graduate degree dissertation topics show

Study on Optical Fiber Sensor for Ultrasonic Testing of Metal Surfaces

Author: DengHu
Tutor: LiangYiJun
School: Harbin Engineering University
Course: Optics
Keywords: optical fiber sensing technology Sagnac interferometer surface acoustic wave Young’s modulus Poisson’s ratio
CLC: TP212.14
Type: Master's thesis
Year: 2011
Downloads: 33
Quote: 0
Read: Download Dissertation

Abstract


The application of ultrasonic techniques to the determination of metal-related physical parameters has an important place. With increasingly demanding requirements, it is urgent to develop more sensitive and reliable methods in non-destructive testing. Using optical fiber sensor technology together with surface wave detection and analyses is promising in this area.In this paper, Sagnac fiber optic interferometer technology is used to detect the velocity of sound transmission in solids. A cast iron triangular object is used in the experiment with two Sagnac loops attached to the ends of the object (for longitudinal wave) or on same side of the iron (for SAW). Data acquisition card and PC are used for data processing. When the ultrasonic signal propagates in solids and the role of aura in the sensitive optical fiber sensor, the output side of the data acquisition card will show two spectra. And the object’s Young’s modulus and Poisson’s ratio can be obtained from experimental data and the theoretical formulas.The working principle of fiber optic sensor is presented in detail with a review of brief history of nondestructive testing of surface acoustic wave technology, detailed description of the type of surface acoustic wave analysis in the absence of the boundary of SAW propagation properties of isotropic solids, in a detailed analysis of surface acoustic wave propagation in bounded solids characteristics and conditions for the boundary changes, restrictions on the Rayleigh wave, Electric sound wave, Love wave, the generalized Rayleigh wave, Lamb wave, etc. in detail the nature of analysis and part of the derivation of their properties are given a more comprehensive overview. And it is described the SAW reflection and mode conversion, diffraction effects and beam deviation and surface acoustic wave attenuation. For the isotropic surface acoustic wave propagation medium, it is given the theoretical model, anisotropic media because of the relatively more complicated, it is given some explanations in this paper, then derived in the acoustic wave equation in the solid. The acoustic effect of fiber in fiber length due to changes in refractive index caused is shown by the re-distribution of the phase change of the phase analysis of the contribution of each variable.

Related Dissertations

  1. Based on the discrete element method analysis of mechanical parameters of asphalt concrete,U414
  2. Theoretical Study on Test of Young’s Modulus of Elasticity and Poisson’s Ratio for Films,TB43
  3. Research of ZnO Thin Films for SAW Resonator,TN304.055
  4. Rock splitting test, uniaxial compression and direct tension deformation characteristics of the experimental study,TU452
  5. One kind of rockfill constitutive model and validation study,TV641.4
  6. Design of Ladder Type SAW Filters,TN713
  7. Study on Thermal and Mechanical Properties of Porous Silicon Thermal Isolation Layer Used in Uncooled Infrared Microbolometer,TN215
  8. Methods of Compensation for Diffraction Effects in Surface Acoustic Wave Filters,TN713
  9. Research on Tunable Comb Filters Based on HiBi Fiber Sagnac Loops,TN713
  10. Fast Characterization of the Young’s Modulus of low-k Film by LSAWs,TN407
  11. Simulation and Preparation for IDT/AlN/Diamond Multilayer Films of Surface Acoustic Wave,O484.1
  12. Simulations of the Mechanical Properties of GaN Nanowire,TB383.1
  13. MOlecular Dynamics Study of the Young’s Modulus of Graphene Sheet,O613.71
  14. The Circuit Design for Portable SAW Vapor Sensors,TP212
  15. Study on Surface Acoustic Wave Nitrogen Dioxide Gas Sensor,TP212
  16. Simulation Study of Mechanical Properties for Self-compacting Light-weight Aggregate Concrete,TU528
  17. Structural, Themal and Mechanical Properties Study of SiGe Nanotube,TB383.1
  18. Theoretical and Experimental Study on New Type High-speed Guided-wave Acousto-optic Modulator,TN761
  19. The Study on Crucial Technology in Saw Accelemeter Sensors,TP212
  20. Research on Physical Properties of Sn-Ag-Cu-Sb Solder,TG42

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Physical sensors > Light sensor
© 2012 www.DissertationTopic.Net  Mobile