Dissertation > Excellent graduate degree dissertation topics show

FPGA Implementation of QAM Modulation and Demodulation in Telemetry Technology

Author: LiuYong
Tutor: FengChi
School: Harbin Engineering University
Course: Communication and Information System
Keywords: Telemetry Technology 16QAM Modulation and Demodulation FPGA
CLC: TP873
Type: Master's thesis
Year: 2011
Downloads: 23
Quote: 0
Read: Download Dissertation

Abstract


As the increasing amount of telemetry data, the existing modulation can not meet the transmission requirements, So people put forward new requirements on the communication system bandwidth and the transmission rate. Meanwhile, increasingly scarce spectrum resources, how to improve the spectrum efficiency has been the focus of attention. Three basic types of digital modulation amplitude or phase alone to carry information, can not take full advantage of the signal plane, the spectrum in terms of a waste. Need for a new digital modulation techniques for bandwidth resources in conditions of limited access to higher transmission rates. Quadrature amplitude modulation and demodulation technology is an efficient digital modulation, digital modulation techniques than the traditional individual to carry information using amplitude or phase mode, QAM modulation signal amplitude and phase to carry information, can take advantage of the signal plane, thus greatly improving the effectiveness of information transmission, but also has high spectrum efficiency, it has been widely used in QAM digital cable TV transmission and digital MMDS system areas.Firstly, the principle of the 16QAM modem described in detail, discussed in detail, and quadrature amplitude modulation and demodulation techniques in digital frequency synthesis system, FIR digital filter, constellation mapping, synchronization, string and conversion, base conversion, and several other key technology modules. One design for digital frequency synthesis, the paper adopted coordinate rotation digital (CORDIC) algorithm is the cosine of real-time computing is the method, instead of the traditional NCO sine look-up table used to convert the phase margin can be a good use of ROM table to overcome the NCO generated when the phase truncation error, which greatly improved the frequency and phase resolution, and a significant savings in FPGA’s internal resources. FPGA technology and then made a brief introduction, by analyzing the proposed FPGA-based 16QAM modulation and demodulation system design and build a model of 16QAM modulation and demodulation system and the environment in the software simulation and analysis of experiments, the final describes the Universal Asynchronous Receiver/Transmitter in the FPGA.This paper presents a FPGA-based digital 16QAM modulation and demodulation scheme that in the Quartus II simulation software development platform, using Verilog HDL hardware description language design and simulation results are given for each module, the last chip in the ALTERA company EP2C8Q208C8 on the functional implementation, experimental results and theoretical analysis is consistent with, and achieve the desired purpose, for the remote telemetry technology to further research and laid a good foundation.

Related Dissertations

  1. Research on the Method of Electromagnetic Induction Data Tansmission in Downhole,TE928
  2. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  3. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  4. Development of LXI Arbitrary Waveform Generator,TM935
  5. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  6. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  7. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  8. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  9. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  10. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  11. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  12. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  13. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  14. Development of Serial Bus Analyzer Based on Nios,TP274
  15. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  16. Development of Pxibus High Performance Digital I/O Module,TP274
  17. Development of LXI Counter,TP274
  18. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  19. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1
  20. Temperature and pressure explosives temperature field memory test technology,TQ560.7
  21. Remote FPGA system design and implementation of security upgrades,TP309

CLC: > Industrial Technology > Automation technology,computer technology > Remote technology > Remote system > Long-distance measurement, distance measurement system
© 2012 www.DissertationTopic.Net  Mobile