Dissertation > Excellent graduate degree dissertation topics show

The Piston Type Verification Device for Heat Meters

Author: LiuZhiHui
Tutor: MaoQianMin
School:
Course: Precision instruments and machinery
Keywords: heat meters piston structure dynamic verification uncertainty
CLC: TP216
Type: Master's thesis
Year: 2013
Downloads: 3
Quote: 0
Read: Download Dissertation

Abstract


As one of the important measurement instruments in urban heating supply trade settlement, the quality and related verification technologies of heat meters play an important role in the reform of implementation of fees based on household heating system. Although the heat meters’ calibration technology gets greatly development in recent years, because of the heat metering supply started late domestically, relevant technology is still lagging behind relative abroad. The calibration device with quality combined with standard meter method has been difficult to adapt to the development of heat meter industry as a result of the inefficient calibration and low accuracy.On the basis of existing verification technology for heat meters, a kind of dynamic verification technology based on piston structure is presented in this article. An automatic verification system based on Advantech IPC is designed, which completes the automatic data acquisition and process control in the VC++environment. Total test and component combination test are completed for heat meters.For the calibration device of hot water flow, a closed-loop control system for hot water circulation is designed which is made up of piston structure, servo motor and grating scale and so on. It can collect multi-channel analog signals, such as pressure, temperature and humidity by the advantech data acquisition modules, and control the hot water line valves by the advantech I/O control modules; For the verification device of temperature sensor pair and calculator, the system can achieve the standard temperature measurement by six half digital versatile multi-meters with its API functions and SCPI commands; Collection modules based on ARM Cortex-M3microprocessor are designed to accomplish the collection of pulse output signal of the grating scale and checked heat meters. At the same time, the hot water volume flow and uncertainty evaluation methods of pairing temperature sensor are also discussed in this article.The piston structure is used in the auto-detecting system, which has absorbed the advantages of the existing verification system, it is shown that this system can effectively improve the precision and efficiency of the heat meter verification, and there is practical importance for domestic heat metering reform and development of heat meter calibration technology.

Related Dissertations

  1. Design and Application of Scope Anti-Shake System,TH743
  2. Stability Analysis and Controller Design for Discrete-Time Switched System,TP13
  3. Stability Analysis of Systems with Time Delays,TP13
  4. Health-based and Ecological Risk Assessment of Contaminated Sites,X820.4
  5. The Evaluation and Forecasting Research on Uncertainty Systems Method of Student Achievement,G642.4
  6. Effects of the Therapeutic Communication System Intervention on the Illness Uncertainty of Preoperative Colorectal Cancer Patients,R473.73
  7. Uncertainty and metafiction : \,I712.074
  8. Guaranteed Cost Control of Networked Control Systems with Uncertainty and Long Time Delay,TP273
  9. Research on Scheduling Problem Based on Asynchronous Intelligent Algorithm,TP18
  10. Estimation for Life Cycle Cost of Overhead Lines,F406.72;F224
  11. Based on the core set of examples of attribute reduction method,O159
  12. SQC uncertain discrete time-delay systems reliable control,TP13
  13. The Study of Detection Methods of Mult-quinolones Residual in Aquatic Products,TS254.7
  14. An Analysis on Uncertainty Propagation in the Four-Step Travel Demand Forecasting Model,U491.14
  15. The Stabilization and Robust Control of Non Fragile Delay-Dependent for the Uncertain Neutral Systems,TP13
  16. Observer-Based Passive Congtrol of Descriptor Systems with Time Delay,TP13
  17. Robust Design for Systems with Parameter Uncertainty,TP13
  18. The Puzzle of the Rabbit and the Duck,I046
  19. The Relationship between Post-modern Art and the Culture Deposit.,J213
  20. Experimental Data Analysis of Rolling Bearing Friction Torque,TH133.33
  21. Study on the Gauge Block Automatic Calibration System Based on Point to Point,TH711.1

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Automatic testing equipment,instruments
© 2012 www.DissertationTopic.Net  Mobile