Dissertation > Excellent graduate degree dissertation topics show

Bag-making Machine Based on Microcontroller Design and Implementation of Intelligent Control System

Author: LiuXiaoLiang
Tutor: XiongJianShe
School: Ocean University of China
Course: Electronics and Communication Engineering
Keywords: Infrared sensors Correction control A/Dconvert Data collection Fuzzy control
CLC: TP273.5
Type: Master's thesis
Year: 2011
Downloads: 24
Quote: 0
Read: Download Dissertation


With the rapid development of modern technology, SCM has been more and morewidely in various fields of application. Intelligent control of one of the importantapplications as the computer, the development of today’s society played a significant role inpromoting. Making machine to use intelligent control system, not only can greatly improvethe automation level of control, but also improve the timeliness and accuracy of control, soas to improve working conditions, improve product quality and the passing rate.The object of the research is based on single chip making machine intelligent controlsystem. Making an overview of SCM-based Intelligent Control System of the workingprinciple of the system architecture and hardware. System mainly consists of optical probesection, computer parts and electrical control treatment. Laser diode as the optical sensorlight source, single chip processing mainly discusses the achievement of hardware andsoftware, and gives the program flow chart. Complete with high and low voltage solid staterelay isolation, correction by variable frequency motor drive fuzzy control. Dead setsignificantly reduced noise, and significantly improve efficiency and save energy.The design of this issue is the use of fuzzy control technology making machineintelligent control system for precise control. Firstly, the optical system into focus on thepositioning mark line imaging, the imaging device to provide light to the optical signal;optoelectronic devices to optical signal received and converted to analog signals by A/Dconverter generates a binary digital post, read by the MCU after rate of change of the valueof combining the fuzzy processing, the final issue of speed forward, backward, turn left,turn right and open the command, shutdown command, to control the movement and speedbag packaging offset, so that bag package properly carried out accurately. By fuzzy control,to better ensure the processing speed and quality, and improve labor productivity.The subject of research objectives:Design correction speed, high precision and good stability control system intelligentbag.1. System, high stability, high anti-interference;2. Can be adapted to high-speed processing, can greatly improve work efficiency;3. Has higher correction precision, correction accuracy up to±1%;4. System uses variable speed correction can focus on the actual work of processing materials for appropriate adjustments;5. Upgrading easy, low-cost.This system can offer excellent solution project for color printing and making bagsby cutting industry. It can greatly increase the labor rate of production and improve productquality.

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  3. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  4. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  5. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  6. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  7. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  8. Study on Optimization of Urban Traffic Signal Herarchical Control Based on Fuel Cost,U491.51
  9. Saw motor energy-saving controller for tilting sand stone processing DSP-based research and development,TM343
  10. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  11. Research on Automatic Control System of Hump Push Peak Speed Based on Fuzzy Neural Network,U284.6
  12. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  13. The Research of Fuzzy Adaptive Soft Start Control on AC Asynchronous Motor,TM343
  14. Control Scheme of Switched Reluctance Generator Used in Wind Power System,TM352
  15. Based on the "Five Zones" Fuzzy Control for Substation Voltage and Reactive Power,TM761.1
  16. Obstacle Avoidance of Mobile Robot Based on Multi-sensor,TP242
  17. The Simulation Perfermence and Analysis for Election Control Hydraulic Litmitedslip Differential of Loader Based on Fuzzy Control,TH243
  18. The Research of Intelligent Car Path Planning Based on the Genetic Algorithm,TP242
  19. Research of Energy Saving Control System of Pumping Unit Based on Fuzzy Control with Self-tuning of Scaling Factor,TE933.1
  20. Research of Thin Slab Continuous Casting Mould Level Control System in BX Steel Corporation,TF341.6
  21. Design and Research of Drivetrain and Control Strategy for Solar-assisted Electric Vehicle,U469.721

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile