Dissertation > Excellent graduate degree dissertation topics show

Compound Modify Polyurethane Grouting Materials with Inorganic Particle /basalt Fiber

Author: ZhengYang
Tutor: YangShaoBin
School: Liaoning Technical University
Course: Materials Science
Keywords: polyurethan grouting inorganic particle basalt fiber glass fiber compound modification
CLC: TQ323.8
Type: Master's thesis
Year: 2011
Downloads: 76
Quote: 0
Read: Download Dissertation

Abstract


Study on basic and flame-retardant formulation of polyurethan grouting material. Compound modify polyurethan with inorganic particle(kaoling、montmorillonite、talc)and short-cut glass(basalt fiber;glass fiber). Study on the role of the additives and infuence law of the mechanical properties and the strengthening mechanism and infuence law of the inorganic particle and fiber.The result shows that the standard of horizontal combustion is FH-1 and the standard of vertical combustion is FV-1. The best mechanical properties can reach 9.01KJ?m-2 in impact, 3.976 MPa in tension, and10.832MPa in compression. The force condition of the basalt fiber is better than that in glass fiber.Microscopic type of material is observed by SEM. Impact of this cell body is compact, orderly, the smaller after strengthed. And fibers distribute to the surface. The hulls of surface wraps resin fibers and combines with matrix good.

Related Dissertations

  1. Research on Key Technology of Water Prevention and Control in Kilometric Vertical Shaft Construction,TD745
  2. Research on Performances of HEPA Filters and the Test System,TU834.83
  3. Development of Bionic Lightweight Basalt Fiber Reinforced Wood Plastics Composite Materials,TB332
  4. Study on the Modification of Basalt Fiber Composites Used for Wind Turbine Blades,TB332
  5. Electrostantic Assembled Glass Fiber/Multiwall Carbon Nanotubes Hybrids Reinforced Polymer Composites,TB383.1
  6. Study Continuous Glass Fiber Reinforced Polypropylene by Two-step Pultrusion,TQ327.11
  7. The Manufacture and Properties Studies of PTFE Architectural Membrane Structure Materials,TU599
  8. Microcellular Injection Molding of PP/GF Composites,TQ325.14
  9. Deformationand Strength Characteristics of Glass Fiber-Reinforced Soil Studied by Experiments,TU521.3
  10. GF / ACF circuit panel absorbing properties of composite materials,TB332
  11. Hydrodynamic Behavior & Meterial Optimization Research of Bridge Deck Pavement in Moist Heat Areas,U444
  12. Study on the Novel Proteolysis Strategies Based on Microfluidic Chips,R917
  13. Effects of Different Amount of Residual Tooth on the Anti-fracture Property under Lateral Loading in Fiber Post-core System,R783
  14. Toughened PA66 has excellent rigidity Research,TQ323.6
  15. Pore Structure Characteristics and Durability Analysis of Fiber Reinforced Concrete,TU528.572
  16. Preparation and Research on Spectral Properties of Bi-doped Silica-based Glasses,TQ171.1
  17. Zoucheng fiberglass E-glass fiber melt production line project run environmental studies,F426.72
  18. The waste PET has excellent rigidity toughness based engineering plastics,TQ323.4
  19. Study on Properties of Glass Fiber Reinforced Gypsum Composite Material,TQ177.37
  20. Prestressed glass fiber reinforced concrete bending members mechanical properties of normal section bearing capacity study,TU377
  21. Study on Philosophy and Experiment of Reinforced Concrete Bridges Strengthened with Reiforced Materials,U445.72

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polycondensation resin and plastic > Polyurethane (poly carbamate ) and plastic
© 2012 www.DissertationTopic.Net  Mobile