Dissertation > Excellent graduate degree dissertation topics show

Study on Thermal Design of Solar Observer at L1Lagrangian Point in Sun-earth System

Author: WangXiang
Tutor: WuQingWen
School: Graduate Schoo,Chinese Academy of Sciences
Course: Mechanical Manufacturing and Automation
Keywords: Solar observer deep space exploration thermal design thermalanalysis thermal optical analysis Space Optical Remote Sensor
CLC: TH751
Type: Master's thesis
Year: 2013
Downloads: 1
Quote: 0
Read: Download Dissertation

Abstract


In order to carry out the exploration of space weather, solar observation plan isproposed. The Solar observer is the first Chinese spacecraft to be launched to haloorbit at L1Lagrangian point in Sun-Earth system. The camera is a deep spaceexploration mission, and equipped with a coronagraph and an imager. Long-termobservations of the solar is a great challenge for thermal design.1. Study the thermal design of the same type of product abroad, and get thethermal design features of this observer;2. Introduced the structural characteristics of the camera, Analysis the thermalenvironment of the orbital, and calculate the heat flux density of this orbit;3. The thermal design of light trap, filter components, detector components,electric box, and entirety of the observer were dissertated in details. Because ofcollector panels settled in the side facing to the Sun, the active heating power isreduced by73%. In order to reduce the temperature gradient caused by long-termobservation, embedding heat pipe in the frame is chosen. Simulation results showthat all conditions meet the temperature indicator in4typical cases.4. Through simulation I get the temperature result of the oberver, which verifythat all cases are in compliance with temperature requirements. The thermal designsystem solves many problems with a low active power, such as the cooling of theobserver in orbit, insulation during orbital transfer phase, and the refrigeration ofCCD sensor whose temperature is more than70℃lower than surroundings. 5. Optimize the thermal design of the camera, and ultimately get morereasonable thermal design programs.6. Mechanics calculations on the camera, and get the mirror reflectordeformation results. Then prove the thermal control indicators are reasonable. That isto say the flexible part has great importance in improving the deformation of themirror. The dynamic stiffness of the system meets the requirements of launch andin-orbit.

Related Dissertations

  1. Heat Transfer Performance of the Metallic Honeycomb and Regenerative Cooling Channel,V215.4
  2. A high-power pulse modulator structure design and exploration,TN761
  3. Research on Formation and Control of Condesantion in Automotive Lamp,U463.65
  4. Influence Analysis of Perturbation Factors on Spacecraft Orbit Design,V448.224
  5. Research on Design Calculation of Ofhp Heat Exchanger,TK172
  6. Investigation of Thermal Design Technology for High-power GaAs Photoconductive Semiconductor Switches,TN36
  7. Trajectory Design and Optimization of Gravity-assist/low-thrust for Deep Space Exploration,V412.41
  8. Research on Loss Analysis and Thermal Design of Converter System for High Speed EMU,TM46
  9. Helicopter-borne radar design Key Technology Analysis and Research,V243.2
  10. Simulation and design of deep-space frequency acquisition algorithm based on two-dimensional partition,V248.1
  11. Study on the Methods for System-Level Thermal Management of Computers,TB65
  12. Design of Thermal Stress Element Scheme for Night Vision,TN223
  13. Preparation of sintered micro heat pipe and heat transfer performance of the experimental study,TK124
  14. Research on Low-Cost Transfer Trajectory Design Based on Three-Body Libration Points,V412.41
  15. Requirement Analysis and Research on Design Method of the Spacecraft,V476
  16. Modeling and Experiment of Intraction of Ceramic Wall and Plasma with Heat Transferring in Dischange Channel,V439.2
  17. Interface thermal contact resistance of thermal testing and simulation of the thermal design of avionics equipment,V243
  18. Research on Heat Design of Solid-state Active Phased Array Antenna,TN958.92
  19. Research on the Thermal Analysis of the Design of Landing Gear Brake,V226
  20. Trajectory Design and Optimization for Deep Space Exploration Probe,V412.41
  21. HLA Application for Simulation System of Deep Space Exploration,V447

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Astronomical instruments > Telescope
© 2012 www.DissertationTopic.Net  Mobile