Dissertation > Excellent graduate degree dissertation topics show

Four needle Zinc Oxide whiskers and surface modification on mechanical properties of NBR effect

Author: WuZhongYuan
Tutor: HuLiang
School: Kunming University of Science and Technology
Course: Chemical Engineering
Keywords: KH570 T-ZnOw modification NBR
CLC: O614.241
Type: Master's thesis
Year: 2013
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Tetrapod-shaped ZnO (T-ZnOw) whisker is inorganic crystal material with three-dimensional space structure.The angle between every two needles is109o28’.As a result of random orientation of T-ZnOw in the matrix,the composites modified by T-ZnOw show the isotropic properities.Moreover,the whiskers posses many superior properties sueh as high strength,wear resistance and antibacterial effect,therefore,it has been considered as an ideal inorganic filler.It has a wide-spread applications in many different activities such as adhesives,rubber,platics and so on.But the nanoparticles are more difficult to disperse in the rubber than the thermoplastics due to their high specific surface and the high surface free energy.So the research of rubber nanocomposites is focused on nanomaterials’ surface modification and strengthening mechanism of nanomaterials.Surface modification of T-ZnOw and the performance of the rubber nanocomposites are in deep investigation.The work could be summarized as follows:1.Wet surface modification and dry surface modification of T-ZnOw with silane coupling agent KH570was carried out. The factors of the modification were discussed and orthogonal experiments were made. The optimum conditions were deterimined by activation index.For wet surface modification,the optimum conditions:hydrochloric acid acts as catalyst; hydrolysis time is1h; mass fraction of silane coupling agent is4%;coupling temperature is70℃;coupling time is3h.For dry surface modification, the optimum conditions:mass fraction of silane coupling agent is4%, coupling temperature is70℃,time is70min. The effect of modification with KH570on dispersibility, lipophilicity and measuring the contact angle of T-ZnOw were investigated. Those test results indicated that the dispersivity,lipophilicity and contact angle of modified T-ZnOw are improved..It was shown by FT-IR that the whiskers was modified by KH570molecular compounded with the O-H of whiskers.2.The influences of modified T-ZnOw contents,modification methods,coupling agent type and dosage on the T-ZnOw/NBR composite properties were studied,when the modified T-ZnOw were used as the filler of NBR.The results showed that wet surface modification is best.With increase of silane coupling agents,the ultimate elongation decreased,resulting in better tensile strength at small loading but decreased strength at large loading.The optimum dosage of silane coupling agents was found at4phr (per hundred of rubber),and it could be concluded KH570gave better outcome of modification that KH560.The quantity of modified T-ZnOw had more effect on the properties of rubber,when filled with50phr modified T-ZnOw,the tensile strength of vulcanizates increased84.8%.Meanwhile,in this paper,the combined effects of T-ZnOw and carbon black on the properties of NBR nanocomposites was investigated.The results showed that two fillers were uniformly dispersed in the NBR matrix,at the same total filling amount,combining T-ZnOw and carbon black could increase the mechanical properties of the nanocomposites.

Related Dissertations

  1. Optimizition of Compositions and Processing Parameters and Wear Properties of Cemented Carbides YG11R Modified by Nanosized Rare Earth,TG135.5
  2. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  3. First- principles calculations of doped anatase titanium dioxide photocatalytic properties,O643.36
  4. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  5. Synthesis and Performance Study of Bisphenol AP-based Polybenzoxazines,TQ320.1
  6. Preparation of Crop Stalk-Based Sorption Materials with High Performances and Their Applications for Pah Removal from Water,X712
  7. Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
  8. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  9. Research on the Interface Modification of Epoxy Resin/Metallic Substrates and Epoxy Resin/Pigment,TQ630.1
  10. The Effects of Exposure to Bisphenol-a between Adolescence and Early Adulthood on Behaviors in Mice and Its Molecular Mechanism,R965
  11. Selenium Modification of Astragalus Polysaccharide and Its Antioxidant Activity in Vitro,R284.1
  12. Physical Modification of the Soybean Protein Concentrate by Alcohol Extraction,TS201.21
  13. Effect of Single and Double Mutations of Yeast H3K79L、H4K20L on the Function of ELP3 and Expression of SSA3,Q75
  14. Effect of Reinforcing Materials on the Properties of Nitrile Butadiene Rubber,TQ333.7
  15. Research on the Modified Methods of Fly Ash for Ammonia-nitrogen Wastewater Treatment,X703
  16. Polyaniline / short fiber reinforced natural rubber properties,TQ330.1
  17. Phosphate modification of nano- TiO 2 Photoelectrochemical Properties of the,TB383.1
  18. Multi-dimensional charge transport group modify iridium complex design, synthesis and optical properties,O627.8
  19. Preparation and Performances of Aluminum Oxide Coated Zirconia Composite Powders,TB383.3
  20. Study on the Synthesis、Preparation and Properties of Modification Phenolic Resin/NBR Composite Adhesive,TQ433
  21. The Study of the Spinning Process of Aromatic Modified Nylon 6 Fibers,TQ323.6

CLC: > Mathematical sciences and chemical > Chemistry > Inorganic Chemistry > Metal elements and their compounds > Section II group metal element and its compounds > The zinc Vice family (Ⅱ B group metal elements ) > Zinc Zn
© 2012 www.DissertationTopic.Net  Mobile