Dissertation > Excellent graduate degree dissertation topics show

The Dynamic Simulation of Pr/Nd Extractive and Separate Process Based on PCS7

Author: XuFangPing
Tutor: YangHui
School: East China Jiaotong University
Course: Control Theory and Control Engineering
Keywords: the extractive of rare earth PCS7 Dynamic simulation the extractive and separate of the Pr/Nd
CLC: O658.2
Type: Master's thesis
Year: 2013
Downloads: 7
Quote: 0
Read: Download Dissertation

Abstract


Rare earth elements are widely used in metallurgy, ceramics, petrochemical inthe traditional fields and permanent magnet materials, superconducting materials,special glass in high technologies fields. they had become an indispensable andimportant raw materials in some related industrial. Relative to the other resources,rare earth adsorption of the largest amount of capital, therefore, it has became thefocus problem which drawn the attention of the world.For the solvent extraction has high separation efficiency, easy operation, largescale and continuous etc, so in the industry of rare earth of our country, this methodhas been widely used to rare earth separation. While the product of extraction andseparation of rare earth from feeding to equilibrium state whole process iscomplicated and the reaction time is long, if the experimental study entirely dependon production field certainly will spend a lot of time. With the improvement ofscience and technology level, computer simulation was used in every walk of life, inthe extractive and separate process of rare earth, we use this advanced method toextract the rare earth elements, this method will be save the human, material andenergy and at the same time, it also can accelerate the research and development cycleof the extractive and separate process of rare earth.This paper is in the support of the national natural science fund "based onmachine vision of the rare earth extraction process monitoring and control me thod ",for the purpose to improve the quality of the rare earth products, and In order todescribe the extractive and separate of the rare earth comprehensively and visually, weapply the Siemens PCS7process control system to simulate the extractive process ofrare earth dynamic. The main research work of this article is as follows:1、After descript the mechanism and technology of the extractive and separateprocess of rare earth briefly, we use the Siemens PCS7established the processsimulation test platform, apply the WinCC configuration software to build theman-machine interface and monitoring picture of the process;2、According to the parameters of process, determine the series and various feedsetting flow of the extractive process of rare earth. Under the guidance of the theoryof the cascade extraction, we simulate the extractive process of rare earth from start tobalance dynamic;3、 we calculate the component content at all levels by using two phasecomposition step recursion formula and display the component content distribution ofall levels in WinCC interface; According to the gradient maximum value of component content change to determine the optimal monitoring control level in theextractive process, during the control process of the extractive of rare earth adjustwith the experience of expert dynamic, to make the products of both ends export meetthe purity finally.4、And we simulate with the extractive process of Pr/Nd dynamic as an example,verify the effectiveness of the method proposed in this paper and the actual extractiontechnology research reference.

Related Dissertations

  1. The Study of Dynamic Simulation of the Passive Dynamic Quasi-Quarupedal Walker,TP242.6
  2. Study of the Belt Conveyor Dynamic Simulation Based on AMESim,TD528.1
  3. Gatling machine gun in a modeling and simulation analysis,TJ24
  4. TVM subway ticket design and analysis of the transmission device,U293.22
  5. Prediction and Simulation of Air Quality of Coal Mining Area Based on VGIS System,X831
  6. Centrifugal Flying Shear Dynamic Analysis and Optimization of Drive System,TG333.21
  7. Motorcycle Damping System and Riding Comfort Research,U483
  8. Denatured eccentric - non-circular interpolation Planetary institutional analysis , design and parameter optimization,S223.91
  9. Based on Reverse Engineering Principles Study on Non-circular Gears Rotary Transplanting Mechanism,TH132.41
  10. Dynamic Characteristic Simulation and Study of Sliding Coal Plow,TD421.62
  11. Centrifugal Flying Shear of Bao Steel Dynamic Simulation and Process Parameter Research,TG333.21
  12. The Design and Analysis of a Large Stewart Platform,TH112
  13. Dynamics Simulation and Analysis of Hoisting and Rotary System for Crawler Crane,TH213.7
  14. Dynamic Simulation Research on Coal Project Economic Evaluation System Based on System Dynamics,F426.21
  15. The Development of HILS Platform for Textile Machine’s Control System,TP391.9
  16. ZL16H Loader Virtual Prototype Modeling and Dynamic Simulation and Mechanics Research on Working Device,TH243
  17. Analysis for the High-pressure Gas System in Guangzhou,TU996
  18. The Design of Process Control System of Acetylene Production Plant Based on Fuzzy Control,TP273
  19. Design and Implementation of PVA Process Control System Based on PCS7,TP273.5
  20. The Research and Design of Polycentric Knee Mechanism,R318.1
  21. Tower-belt Structural and Dynamic Characteristics Simulation Analysis,TH213.3

CLC: > Mathematical sciences and chemical > Chemistry > Analytical Chemistry > Separation of elements and compounds > Extraction method
© 2012 www.DissertationTopic.Net  Mobile