Dissertation > Excellent graduate degree dissertation topics show

The Research on Heat Storage Performance and Practical Application of Aluminum-based High Temperature Phase Change Thermal Storage Material

Author: ChenJuFei
Tutor: XuGuoFu
School: Central South University
Course: Materials Physics and Chemistry
Keywords: phase change thermal storage material aluminum alloy latent heat sensible heat total heat storage
CLC: TB34
Type: Master's thesis
Year: 2013
Downloads: 36
Quote: 0
Read: Download Dissertation

Abstract


Abstract:With the research and application of solar thermal power technology is worldwide, the research on the property and application of the high-temperature phase change thermal storage materials has attracted increasing attention. In this thesis, on the basis of Al-Si alloy, we optimize the design and prepare nine aluminum high-temperature phase change thermal energy storage materials with different components. With the help of X-ray diffraction(XRD), scanning electron microscope(SEM), differential scanning calorimetry (DSC) and other modern analytical tools, the microstructure, phase change temperature, latent heat, sensible heat, and total energy storage and other properties of these phase change thermal energy storage materials were studied. The main conclusions are as follows:(1) The phase change temperature of aluminum alloy phase change thermal storage materials we have designed and prepared range between400～800℃, the latent heat of all aluminum alloys are higher than200J/g and can meet the requirements. Al-Si series aluminum alloys have higher latent heat, about to400J/g.(2) Al-Cu-Mg-Zn series aluminum alloy have higher density and thermal conductivity compared to the Al-Si series and Al-Cu-Mg-Si series aluminum alloy phase change thermal storage materials, and have a total thermal storage above3200J/cm3, more suitable for solar thermal power generation system.(3) The oxidation weight-gain of Al-Cu-Mg-Zn series aluminum alloys increase with the oxidation time increase at the same temperature under high temperature oxidation; in the case of the same oxidation time, as the oxidation temperature increases, oxidation weight-gain increased significantly.(4) Al-Cu-Mg-Zn series aluminum alloys do not substantially oxidized or that an oxide film is formed on the sample surface, preventing the sample continued oxidation at lower temperature; but at higher temperature, with the oxidation time increasing, the oxide film formed on the surface of the sample has been destroyed and broken, and can not prevent the oxidation of the sample.(5) The phase change latent heat of Al-Si series aluminum alloys have a small amount of decline with the increase of the number of thermal cycles, but the decline is very small and under3.84%; The phase change temperature of Al-Si series aluminum alloys have a small amount of increase with the increase of the number of thermal cycles, but the change are very small and under0.31%.

Related Dissertations

  1. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  2. Investigate of Chromate Conversion Coatings on Aluminum Alloy,TG174.4
  3. Energy Distribution and the Degree of Energy Closure of Songnen Meadow Steppes by Eddy Covariance Measurement,S812
  4. Exploration and Simulation on Semi-solid Billet by Induction Heating in Temperature Field,TG249.9
  5. Process Research on Fiber Laser-MIG Hybrid Welding Medium Thickness Aluminum,TG456.7
  6. Nanoparticle Tio 2 Dispersed Composite Phase Change Material for Energy Storage in Air-conditioning,TB383.1
  7. Study on Hdrogen Degassing Effect of Ultrasonic Vibration on Both Liquid Melt and Semi-solid Slurry of Al Alloy,TG292
  8. Study on Preparation and Performance Tests of Gypsum-based Phase Change Materials,TB34
  9. Fabrication and Mechanical Properties of Pyramidal Lattice Truss Sandwich Structures of Aluminium Alloy,TB383.4
  10. Trace Ge, Ce on Al-Cu-Mg-(Li) alloy microstructure and properties,TG113
  11. Corrosion Behavior Research of 7B04 High-strength Aluminum Alloy and Its Protective Coating in Marine Atmospheric Environment,TG172.3
  12. Research on Stress Corrosion Cracking and Corrosion Fatigue of ZL101 Aluminum Alloy,TG172
  13. Studies on Al/Mg/Al Multi-layers Structure Cladding Materials Produced by Accumulative Roll Bonding (ARB) Techniques,TB331
  14. High-energy ball milling copper alloy and anti-corrosion,TF123.111
  15. 6082-T6 aluminum alloy microstructure and mechanical properties of friction stir welding head,TG453.9
  16. Study on Microstructures and Mechanical Properties of 2A23 Aluminum Alloy by Age Forming Process,TG146.21
  17. 7050A1/Gr composite aging hardening behavior and internal friction study,TB33
  18. Research on Radiation Balance and Environment Energy of the Upper Canopy Space in Chinese Fir Forest,S791.27
  19. Dynamics of Desert Steppe Surface Albedo in Inner Mongolia and Its Effects on Land-atmosphere Fluxes,P422
  20. Numerical Simulation of Cloud Microphysical Features of Landfall Typhoon KROSA(0716),P426.51
  21. High strength B93 aluminum alloy bar solid solution with two-stage aging process,TG156.9

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Functional Materials
© 2012 www.DissertationTopic.Net  Mobile