Dissertation > Excellent graduate degree dissertation topics show

The Performance Analysis of the Small Mining Anti-explosive Fully Hydraulic Loader

Author: LiMing
Tutor: ChaiGuangYuan
School: Xi'an University of Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: Loader Different Working Conditions Characteristic Analyze Co-simulation
CLC: TD421.7
Type: Master's thesis
Year: 2013
Downloads: 13
Quote: 0
Read: Download Dissertation

Abstract


This paper aims at the problems appearing in real conditions caused by Small MiningAnti-explosive Fully Hydraulic loader, using mechanical dynamics software ADAMS andhydraulic simulation software AMEsim to process co-simulation for the Small MiningAnti-explosive Fully Hydraulic Loader and get the desired goal through original prototype ofthe parameters,the main contents include:(1)Use mathematical method to establish the mathematical model of each hinge;Usethe static method to establish the working body mechanics model;Finally,establish theshovel loading process resistance model and calculate the value of external load during thejob process.(2)Establish3D model for all the parts of loader and make virtual assembly in PRO/Eenvironment and then import the model into dynamic software ADAMS,define the attributesof working bodies、add the constraints、drive function,At last make a comparison between thesimulation value and the calculate value.(3)Using hydraulic simulation software AMESIM to establish loader hydraulicsystem. Through the combination between dynamics software ADAMS and hydraulicsoftware AMEsim considering the road and tire factors,analyze the working characters ofZLY06loader and make a evaluation of the characters in different operating conditions.

Related Dissertations

  1. Dynamics Simulation and Finite Element Anslysis of the Loader Working Device,TH243
  2. Dynamic Simulation and Fatigue Durability Analysis of Wheel Loader Worktool,TH243
  3. The Simulation Perfermence and Analysis for Election Control Hydraulic Litmitedslip Differential of Loader Based on Fuzzy Control,TH243
  4. ZL16H Loader Virtual Prototype Modeling and Dynamic Simulation and Mechanics Research on Working Device,TH243
  5. Research and Simulation on MAC Protocols of Ultra-short Wave Networks,TN925
  6. Development of Wheel Loader Working Device Design and Design Analysis System,TP391.7
  7. Strategy dual spool hydraulic excavator control system,TU621
  8. Modeling and simulation and energy analysis study excavator negative flow control hydraulic system,TU621
  9. Research on Single Pump and Double Motor System Matching Parameters and Driving Synchronicities of Full Hydraulic Motor Grader,TU623.6
  10. The Mechanical-Hydraulic Co-Simulation of the Hydraulic Support and the Analysis of Hydraulic Control System,TD355.4
  11. Study on Braking Performance of Automobile ABS Based on Virtual Prototyping Technology,U463.526
  12. Program Design and Dynamics Analysis of a New Deployable Bridge,U441.3
  13. Study of Close Power Transmission Experiment Device and Speed Reducer Power Effeciency Measurement Method,TH132.425
  14. The Finite Element Analysis and Layout Research of Reducer Test Bench Loader,TH132.46
  15. Co-Simulation Analysis of Four-Wheel Steering Vehicle Based on ADAMS、Matlab/Simulink,U461.6
  16. Reach Based on RBF Neural Network of Pneumatic Position Servo System,TP273
  17. Research on Control Strategies of Phase-Shifted Full Bridge ZVZCS Converter,TM46
  18. Hydraulic bulldozer machine parameter matching with Adaptive Power Control Method,TU623.5
  19. Design and Research on Semi-Active Lateral Damper of High-Speed Train,U270.3
  20. Design and Implementation of the Firmware for a Tobacco Selling Terminal,TP368.1
  21. The Mechanical-Hydraulic Co-Simulation and Study of Hydraulic Excavator Working Device,TU621

CLC: > Industrial Technology > Mining Engineering > Mining machinery > Mining machinery > Underground mining machinery > Loading machinery
© 2012 www.DissertationTopic.Net  Mobile