Dissertation > Excellent graduate degree dissertation topics show

Research on Hydrogen Induccd Cracking Behaviors of Different Microstructure Pipeline Steels

Author: PengXianHua
Tutor: LiuJing
School: Wuhan University of Science and Technology
Course: Materials Science
Keywords: Pipeline steel Hydrogen Induce Cracking (HIC) Microstructure Grain boundarystructure Hydrogen permeation
CLC: TG142.15
Type: Master's thesis
Year: 2013
Downloads: 56
Quote: 0
Read: Download Dissertation

Abstract


Pipeline steel in the process of transporting oil and gas, it is easy to occur HydrogenInduce Cracking (HIC) and lead to lose efficacy because of the influence of H2S contained inthe oil, it will cause great potential safety hazard to environment and security of person. So itwill have great practical significance to study the mechanism and influence factors of HIC, itwill help to enhance the HIC resistance and prolong the service life of the pipeline steel.This article chooses three typical microstructure of pipeline steel:1#(ferrite+pearlite),2#(Acicular ferrite),3#(ultra low carbon bainite). The NACE standard TM-0284-2003was usedto compare the HIC sensitivity of the three kinds of pipeline steels. Use optical microscope andscanning electron microscope and EBSD to observe the crack. Combined the theory ofhydrogen pressure to analyze the nucleation mechanism of the HIC, and analyzed themetallographic structure characteristics and the grain boundary structure on the influence ofcrack propagation. The converted Davanathan-Stachursky device was used to measure thehydrogen permeation kinetics parameters of the steels, the relationship between HIC sensitivityand hydrogen trapping efficiency was analyzed. The effect of microstructure of differentthickness on HIC behaviour was studied by observing the crack location. The results showedthat:(1) Under the environment of acid wet H2S, the HIC in the steel usually nucleate on theinclusion and banded structure, and the banded structure’s HIC sensitivity was stronger than theinclusion.(2) The HIC crack in F+P steel mainly propagate along the pearlite banded structure. The crackin AF steel mainly along the boundary of the acicular ferrite and polygon ferrite while it mainlyalong the original austenite grain boundary in ULCB steel.(3) Hydrogen permeation kinetics parameters can be used to well explain the HIC sensitivity ofthe materials. The low angle boundary have resistance to HIC in the pipeline steel, the higherthe proportion of the low angle boundary, and the better the steel to resist HIC.(4) The more the value of hydrogen flux J∞, hydrogen diffusion coefficient Deffand the lowerthe value of solubility of hydrogen in the steel, the less pipelines steel is prone to HIC.(5) The different pipeline steel has the different HIC sensitivity in different thickness. TheULCB steel’s HIC was mainly occur in the1/4thickness, because the microstructure in theseplace has the strong ability to capture hydrogen atom and has the high HIC sensitivity.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  7. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  8. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  9. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  10. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  11. Chinese word for international education research based lexicography,H164
  12. The Effect of Tungsten on Microstructures and Properties of Wear Resistant Overlays Prepared by Plasma Cladding,TG174.4
  13. Study on the Structure and Electrical Properties of the Doping NiCo0.2Mn1.8O4 Spinel Type,O614.81
  14. Research and Development of Spidroin/Poly-L-lactic Acid Composite Nanofiber,R318.08
  15. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  16. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  17. Study of the Polymer Synthetic Paper Formula and Papyraceous Performance,TS71
  18. Study on Microstructure and Superconducting Properties of MgB2 Wires Fabricated by Two-Step PIT,TM26
  19. Study on Morphological Evolution and Toughening Mechanism of Sandbag Microstructure-toughened PA6/EPDM-M/nano-CaCO3 Ternary Composites,TB33
  20. The Photoluminescence of H1.77 [Sr0.8 Bi0.21Ta2 O7] Nano-layers Annealing under Different Temperatures and the Effect of the Cu2O Addition on Its Photocatalytic Activity,O482.31
  21. Compressive Strengthes and Microstructural Characteristics of Fiber Reinforced Geopolymer,TB321

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Steel > Microstructure and properties of steel > Analysis of the steel test
© 2012 www.DissertationTopic.Net  Mobile