Dissertation > Excellent graduate degree dissertation topics show

Design of a Contrinual Zoom Objective with High Speed

Author: LuQiang
Tutor: ShenWeiMin
School: Suzhou University
Course: Optical Engineering
Keywords: Zoom system Hyperspectral imager Initial structural determination PW method Tolerance analysis Optical design
CLC: TH74
Type: Master's thesis
Year: 2010
Downloads: 277
Quote: 1
Read: Download Dissertation

Abstract


Compared with fixed focus lenses, zoom lenses have variable magnification without adjusting their position so that they can image with different resolution and enhance effectively their target detection efficiency. It is difficult for the current zoom lens to be used as the fore objective of high resolution hyperspectral imagers, because of its low speed and imagery non-telecentricity that should result in their low collection power and then low spectral resolution and signal-to-noise, and their pupil mismatch. To this end, study on high speed and imagery telecentric zoom objectives is carried out in this thesisIn the first chapter, the significance of this issue is introduced and the development of zoom lenses is reviewed.In the second chapter, at first, the concept, category and comparison of zoom systems are introduced. Then, based on the performance requirement of our developed hyperspectral imager, the structural type suitable for its zoom fore objective is analyzed and selected. At last, Gaussian optical analysis of the chosen mechanical compensation zoom system is presented.In the third chapter, solution for initial structure parameters of the zoom fore objective is given. First, its power is distributed among its lens groups. Second, their basic aberration parameters P and W are solved with our developed program. Third, the structural parameters, including the lens number, the distributing power, and the P and W value of singlet and cemented doublet, of each group are determined through resolution of its P and W values. Finally, the initial layout of mechanical compensation zoom objective is calculated with the above method.In the fourth chapter, according to the mentioned way in the preceding two chapters, mechanical compensation zoom lenses without and with a changing root are designed. Its optimization method, optimized result,cam curve, and imaging quality are given. The designed systems have the adventages of high relative aperture, structural compactness, imagery telecentricity, even illumination on image plane, and excellent imaging quality.In the fifth chapter, based on the structural feature of the designed zoom lenses, their tolerance is analyzed and distributed optimally for facilitating its fabrication.In the last chapter, the work and the innovation points are concluded and further researches prospected.

Related Dissertations

  1. The Research for Small-sized Reflecting/Catadioptric Telescope,O439
  2. Study on High Power Nd:YAG Laser Scanning Galvanometer System,TN249
  3. The Design of LED Operation Shadowless Lamp,TM923.34
  4. Space hyperspectral imager Compensation focusing optical system of pre-,TH743
  5. Hyperspectral imager radiometric calibration laboratories,TH744.1
  6. Zoom system research and design,TB852.1
  7. LED civilian aircraft instrument panel lighting,TN312.8
  8. Of optical freeform detection optical path program and key components of the design research,TH74
  9. Near-infrared fundus camera design,TH786
  10. Study on Lighting System Integration Technology of High Power Multi-Chip LED Based on Heat Pipe Structure,TK172.4
  11. Investigation on CO2 Laser Heterodyne Detection Characteristic Using Rectangular Detector,TN247
  12. Optical Design of Flow Imaging Red Tide Monitoring System,TH766
  13. A Design of Isolated Retina Optical Visual Simulator,O439
  14. Study on the System of Achieving Annular Beam,TN24
  15. Study of Tolerance Analysis Method Based on Matrix Transformation,TG801
  16. Optical System Design of an Infrared Dual-Band Seeker,TJ765.331
  17. Optical Design for Dynamic Star Simulator Base on LCOS,V416.8
  18. The Study of Imaging Spectrometer Based on Spectral Prism,TH744.1
  19. Design of Infrared Zoom Optical System,TH74
  20. Miniature projection optical system design,TN946.1
  21. Design of Catadioptric Omnidirectional System with Undistorted Imaging,O435.1

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Optical instruments
© 2012 www.DissertationTopic.Net  Mobile