Dissertation > Excellent graduate degree dissertation topics show

Study on Fine Simulation and Optimization Techniques for Auto Panel Forming Processes

Author: YiGuoFeng
Tutor: LiuYuQi
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: sheet metal forming high strength sheet drawbead KBE drawbeadoptimization management face
CLC: TG386
Type: PhD thesis
Year: 2013
Downloads: 291
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of the China automobile industry, the technology of numerical simulation for sheet metal forming of auto panel has been widely used to predict product forming defects in early design stage and improve the quality of the process and structure of die design. The simulation technology is still under development to meet the requirements of the higher simulation accuracy at the design and field test stages. Therefore, it is very important to research the subject about the refinement of simulation and optimization techniques of auto panel.The study is supported by the fund of the National numerical control major projects (project name "high-strength steel cool stamping technology research", project No:,2010ZX04014-072). Firstly, both the factors that affect the forming simulation accuracy of auto panel and the optimization technology are analyzed. Then the refinement simulation techniques are studied, which includes the following aspects:In order to study the law of the drawbead resistance and lifting force variation with the high-strength steel und the die structures, the test program is developed. In the program, the drawbeads with the symmetrical and asymmetrical shapes are considered. The results show that:The variation laws are same in the symmetrical and asymmetrical shapes drawbead with common steel. But the laws are different with the high strength steel. The geometric parameters with asymmetrical shape drawbead will affect the deformation and springback to some extent.Basis on the experiments and simulation analysis, a control method for high-strength steel forming quality with asymmetrical shape drawbead is developed, which can reduce the curl amount of deformation and springback of high-strength steel with less workload and shorten debug time.The drawbead optimization method with knowledge using the incremental finite element method is developed. Firstly, the key features of auto cover is classified to build the drawbead optimization knowledge base. Then optimization method is developed using the Forming Limit Diagram (FLD) as the objective function. In the method, the factors for forming formability, such as, severe thinning, rupture, wrinkling, unsufficient forming within the region of open line are considered, with can solve the problem of the initial value and the long time optimization effectively.The Influencing factor for forming formability of the blank holder deformation is analyzed with the elasticity finite element method. A process optimization and simulation technology is developed to control the gap (Referred as the management face) between the blank holder and the forming sheet. Both the calculation model of height difference within the management face and the setting rules of inner-outer blank holder force are developed using the theoretical derivation and simulation technology.Basis of the simulation results and experimental data, the process parameters for forming formability, such as, the equivalent and real shape drawbead, the blank holder deformation and the gap between blank holder and forming sheet are studied. The conclusions with test and simulation to improve the refine simulation accuracy of auto panel is Significance.

Related Dissertations

  1. Study on Springback of High-Strength Steel Stamping,TG386
  2. Simulation on the Principle of Field Shaper in Electromagnetic Sheet Metal Forming and Construction Improvement,TG661
  3. Development of Trimming Line Unfolding and Flanging Forming Simulation System Based on Pro/ENGINEER,TG385
  4. The Development and Application of Synchronous Simulation System for Automobile Panels’ Forming,TG385.9
  5. Study of an Analysis System Based on Pro/E for Metal Blank Unfolding,TG38
  6. Research of Key Technologies of 3D Virtual Simulation Platform of Sheet Metal Forming,TG659
  7. Research and Development of Fast Analysis Software of Sheet Metal Forming Based on SolidWorks,TG385
  8. Consider the elastic deformation of the mold stamping AHSS rebound control and topology optimization,TG386
  9. Based on virtual manufacturing sheet metal forming simulation technology,TP391.9
  10. The Drawing Process Robust Planning and the Die Surface Compensation of the Automotive Wheel Cover by Numerical Simulation,TG386
  11. Research and Development of Integrated System for Simulation of Sheet Forming Applied to Whole Process of Product Design,TG386
  12. The Research and Implementation of Knowledge-based Associated Technology for Progressive Die Relief Design,TG385
  13. Information Supporting Technology Research of Single Piece and Small Batch Product Innovation Design,TB472
  14. Research on Q450NQR1 High Strength Sheet Metal Forming Springback and Application of Shallow Drawing,TG386.3
  15. Research on the Law of Weld Movement and Forming Properties in the Drawing Process of Laser Tailor-Welded Blanks,TG386.41
  16. Research on the Norm of Digital Design and Manufacture of Autombile Panel Dies,U468.2
  17. Database Developments of the Forming Parameters for Aircraft Sheet Meatl Parts,V261
  18. Numerical Simulation of the Springback of High-Strength Sheet Metal Forming,TG386
  19. The Design of the Multi-function Material Forming Testing Machine,TH87
  20. Study on Numerical Simulation and Process of Incremental Sheet Metal Forming,TG386
  21. Controllable Drawbead U-shaped piece of high-strength sheet springback analysis and experimental study,TG386

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Cold stamping process
© 2012 www.DissertationTopic.Net  Mobile