Dissertation > Excellent graduate degree dissertation topics show

Research on VBHF Technology of Aluminium Alloy Stamping

Author: ZhaoHongMei
Tutor: ChenZhongJia
School: Hefei University of Technology
Course: Materials Processing Engineering
Keywords: Aluminium alloy Variable blank holder force(VBHF) Hemispheric part Forming quality Artificial neural network Geneticalgorithm
CLC: TG389
Type: Master's thesis
Year: 2013
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Recently, aluminum alloy sheet and other lightweight materials have been applied in automobile industry more and more popularly, which will decrease the auto body weight greatly and thus reduce gas consumption and emission. However, the formability of these materials are not as good as traditional automotive steel sheet, and how to improve the forming result becomes one of the most popular and important problems. As a simple and effective technical solution, Variable blank holder force (VBHF) technology has attracted more and more people to research on it. Hemispheric part is a basic and typical surface shape part. Research on its deforming law and characteristic is very important to get better forming quality and reveal the drawing mechanism of surface shape part. Variable blank holder force which changes with the deep drawing time can improve the forming quality, but the relationship between the forming quality and the values at different time is not clear. The development of artificial intelligence technology is a possible study method to get an optimized variable BHF.In the paper, based on numerical simulation software, experiment of different variable BHF change with the deep drawing time was conducted. Intelligent optimization method was then used to figure out the influence of BHF values on forming quality. The main work of this thesis can be concluded as follows:A standard was proposed to evaluate the forming quality, so we can evaluate the forming quality is good or bad by compare the value of number. The standard was applied to process the orthogonal test samples, and the influence of BHF combination on forming quality is obtained by means of range analysis. The sequence of influence extent is:F4,F3,F1,F2, F5(F1-F5are BHF at t=0,1/4T,1/2T,3/4T, T. T is the time of deep drawing). Meanwhile, the optimum BHF combination is got, and the corresponding forming quality indicator by CAE simulation confirmation test is0.0997, which is the least among all the orthogonal samples.Artificial Neural Network(ANN) model is developed to map the complex non-linear relationship between forming quality indicator and BHF values, and Genetic Algorithm (GA) is used to optimize BHF value in the selected range of parameters, and the best variable BHF curve is figured out. The forming quality indicator of CAE verification test is0.0595, which is less than all the other test samples. The result of physical deep drawing experiment of5083aluminum alloy indicats that the quality of part formed with the optimum variable BHF curve is better than other variable BHF, so the proposed method using ANN combined with GA to optimize the variable BHF curve is feasible.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Research on the Inteligent System of High Performance Concrete Mix Design in Zhujiang Triangle Area,TU528
  3. BP network optimization based on genetic algorithm optimization of the biodiesel process,TE667
  4. Enterprise Security Benefit Evaluation and Development Strategies,F272;F224.5
  5. Ketones 3D-QSPR study,O641
  6. The Optimization Research of Feedforward Neural Network Based on Genetic Algorithms,TP183
  7. Prediction of Binding Affinity of Human Transporter Associated with Antigen Processing,R392.1
  8. Microstructural Features and Their Influence on the Properties of Ti-10V-2Fe-3Al Titanium Alloy,TG146.23
  9. Control of robotic arm movements transform regular surface EMG,TN911.7
  10. Research of Blind Equalization Algorithm Based on Neural Networks,TN911.7
  11. Design of Small-sized Immersed Instrument of COD Using Uy-vis Spectrophotometry,TH744.121
  12. Study of Low Voltage Series Arc Fault Diagnosis Technology,TM501.2
  13. The Model of Research for Teaching Quality Evaluation Based on Neural Network,O242.1
  14. Study of Mine Underground Water Hazard Control Engineering Visualization and Surface Subsidence Prediction,TD745
  15. Study on Zinc Phosphating Technologies and Performance of Aluminium Alloy,TG174.4
  16. The Study of Chemical Engineering Modeling and Predictive Method Based on Neural Network,TP183
  17. Wind Power System Modeling Based on Artificial Neural Network and Its Application,TM614
  18. A Research on BP Neural Network High-rise Building Green Construction Evaluation,TU974
  19. Application of QSAR and Molcular Docking Studies in Medicinal Analytical Chemistry,R917
  20. Method Research of Typhoon Cloud Recognition and Its Center Location Based on Doppler Weather Radar Image,P444
  21. Detection of Synthetic Red Food Colors Using Fluorescence Spectrometry Based on Neural Network,O433.1

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Non-ferrous metal and alloy materials stamping
© 2012 www.DissertationTopic.Net  Mobile