Dissertation > Excellent graduate degree dissertation topics show

The Research of the Oscillation Parameters and the Synchronous Control Model of the Continuous Casting Mold

Author: ChenHuaShun
Tutor: LiuCai
School: Yanshan University
Course: Mechanical Design and Theory
Keywords: stainless steel the quality of slab surface synchronization control model inverse oscillation the design of user interfaces
CLC: TF777
Type: Master's thesis
Year: 2013
Downloads: 71
Quote: 0
Read: Download Dissertation

Abstract


The mould oscillation technique is the key technology of continuous casting toindustrial applications. The emergence of non-sinusoidal vibration technology andhydraulic vibration device is improving the ability to adjust the waveform and parameters,which can lay the foundation for the development of reasonable vibration mode. Stainlesssteels have a wide use in the national economy. With the very different characteristicsfrom carbon steels, the slab surface of stainless steels is prone to deep oscillation markswhich are difficult to remove. In order to improve the quality of slab surface, somereasonable oscillation synchronization control models need to be developed. A lot ofstudies are being done by previous for the theory of synchronization control model, butfewer for the development of model for specific kinds of steelOn the basis of characteristics of steel grades, the stainless steels were divided intoaustenitic stainless steels and ferritic stainless steels. The mold oscillation processparameters for austenitic stainless steels and ferritic stainless steels were determined byanalyzing the respective continuous casting characteristics. A non-sinusoidal vibrationwaveform was derived in detail, and then the analytic formulas of process parameters wereobtained. The construction method of the vc-h synchronization control mode and the vc-fsynchronization control mode were studied, and then the synchronization control modes ofaustenitic stainless steels and ferritic stainless steels were constructed.By analyzing the characteristics of the inverse oscillation synchronization controlmodel, the correspondence between casting speed and the basic oscillation parameters wasestablished, and then the construction method of this model was proposed. The sine andnon-sinusoidal inverse oscillation synchronization control models of stainless steels weregiven, which can get the optimal processing parameters of stainless steels in a wide rangeof speed. Then the user interfaces of the inverse oscillation synchronization controlmodels were designed by using the software Visual Basic.After building the synchronization control models, the ranges of oscillation basicparameters in main casting speed were determined. Then the oscillation parameters wereoptimized by using variable parameter method which based on MATLAB. This optimization gives certain reference for individually adjusting the parameters of the maincasting speed in the actual production.

Related Dissertations

  1. Environmental Effects of Poisonous and Harmful Substances in the Typical Industrial Solid Wastes,X705
  2. Biocompatibility Modification of Solid Materials Via Living Free Radical Polymerization,O631.3
  3. Study on the Microstructures and Properties of N-alloyed Low Carbon Martensitic Stainless Steel,TG142.71
  4. Effects of Environments on Fracture Toughness and Fracture Behavior of 304 Stainless Steel,TG142.71
  5. Study on Chemical Coloring and Sealing Processing of Stainless Steel,TG177
  6. Investigations on Cyclic Deformation and Damage Behavior of AL6XN Super-Austenitic Stainless Steels,TG142.71
  7. Research on Preparation of Dopamine Composite Films on Stainlees Steel and Corrosion Resistance,TG174.44
  8. Research of the Design and Manufacture of REAC Lined Tube for Resisting Flow Induced Corrosion,TE932
  9. Microstructure and Mechanical Property of Clad Plate of Stainless Steel by Vacuum Composite Rolling,TG142.1
  10. Stainless Steel Bright Annealing Furnace with Waste Heat Recovery Energy-saving Technology Research,TG155.1
  11. Preparation and Characterization of Stainless Steel Hollow Fiber Support Membrane,TB383.2
  12. Stainless Steel Smelting Refractories of Calcium with Magnesium,TQ175.7
  13. Several Ladles Pouring Together for Large Super-low-carbon Stainless Steel Casting,TG260
  14. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  15. Study on the Dry Cutting Performance of Austenitic Stainless Steel 0Cr18Ni9,TG142.71
  16. Research on Precision Laser Cutting of Open CNC System,TG485
  17. Study and Design on Strain Hardening of Austenitic Stainless Steel Pressure Vessels,TH49
  18. The Study of Synthesis and Properties of ZSM-5 Zeolite Membrane on Stainless Steel Wire Mesh Substrate,TQ424.25
  19. Investigation on Micro Characters of Selective Laser Melting and Hot Isostatic Pressing Post-treatment,TG665
  20. Research on A-TIG and A-LBW of Austenitic Stainless Steel,TG456.7
  21. The Simulation and Numerical Analysis about Manufacture Processing of Stainless Steel Based on ABAQUS,TG501

CLC: > Industrial Technology > Metallurgical Industry > Steelmaking > Ingot > Continuous cast steel,near net shape casting
© 2012 www.DissertationTopic.Net  Mobile