Dissertation > Excellent graduate degree dissertation topics show

Research on Yarn Tension Control System Based on DSP

Author: FuYanHui
Tutor: ZhouMeiLan
School: Harbin University of Science and Technology
Course: Power Electronics and Power Drives
Keywords: automatic winding yarn tension control system system simulation fuzzy PI
CLC: TS101.922
Type: Master's thesis
Year: 2013
Downloads: 22
Quote: 0
Read: Download Dissertation

Abstract


The yarn tension is a key factor to decide bobbin winding density uniformity. If theyarn tension is uneven, will case produced bobbin density unevenness and case the nextprocess uneven dyeing, and will case unwinding tension fluctuation is too large.Domestic tension control system in winder mostly is mechanical, caused wear much tothe yarn, and tension fluctuation relatively large, seriously hampered the development ofthe domestic winder.This dissertation describes the status of research and development at home andabroad as well as the source of the subject and the significance of the study. By theanalysis of the generation and the role and the composition of the yarn tension in processof winding, the fluctuations factors affect yarn tension, a yarn tension closed-loop controlsystem based on DSP is proposed.By planning the overall design of the yarn tension control systems, the system isdivided into four parts using modular design concept. To detect the yarn tension inreal-time selecting a resistance strain gauge tension sensor in data acquisition module,and analysis of the measuring mechanism and signal conditioning circuitry. Thedissertations introduce new implementing agencies in the tension adjustment andexecution module, and design a simple and reliable tension adjustment device. Bychanging the speed of the permanent magnet synchronous motor (PMSM), to adjust thespeed of feed roller, and then adjust the linear velocity of the yarn to complete control ofthe yarn tension. To facilitate the manual operation, the systems set and display the valueof the yarn tension in a touch screen.Use MATLAB software SIMULINK module to simulate the permanent magnetsynchronous motor, to verify the feasibility of the motor-control part of the tensioncontrol system. The tension controller use fuzzy PI control strategy to control the yarntension. Then the dissertations design the hardware and software of the control system,analyzed the main circuit, inverter drive circuit, position detection circuit, the tension sensor interface circuit, protection circuit and man-machine interface circuit, andelaborated the function of each module. Tension control system software design focuseson the main program of control system, the timer interrupt service routine and MODBUScommunication.The end of the dissertations describes the experimental platform of the yarn tensioncontrol system. The experimental results show that the system can be good control of theyarn tension.

Related Dissertations

  1. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  2. Research on HID Lamp Rectifying Effect,TM923.32
  3. Research on Validation Methodology and Tool for Models of Simulation System,TP391.9
  4. Research on Attitude Control Law of Endo-Atmospheric Missile,TJ765.23
  5. Project Financing in Tourism Resources Development Application,F283
  6. Study of Simulation and Optimization of Storage Logitics System Based on Flexsim,TP391.9
  7. Research of Millimeter Wave Radar Depth Indicator for Mine,TD534.6
  8. Research and Simulation on Vehicle’s 4 Wheel Drive System,U464
  9. System Simulation of the Policy Design and Efficiency for the Water Ecology Carrying Capacity,X171
  10. The Development about Control System of Slack Turning Machine and Vector Control Simulation of Asynchronous Machine,TQ440.5
  11. Research on Bank Credit Risk Control Based on Complex Systems,F224
  12. Modeling, Analysis and Decentralized Control of Networked Large-scale Systems,O231
  13. Research on Coupling Control Systems and Simulation for the New Vibratory Pile Driver,TU67
  14. Design of the Subway Signal Simulation System,TN911.7
  15. Research and Development of New Automatic Five Tons of Power Transformer Horizontal Winding Machine,TM41
  16. The Research for Detecting Techniques of NC Device’s Technical Specifications,TG659
  17. Analysis and Simulation System of Industrial Robot with Six Degrees of Freedom on Path Generation,TP242.2
  18. Key Technologies of Wind-powered Pumped Hydrostorage Systems,TV743
  19. A Study of AGC System with Wind Power Intergration,TM76
  20. Research on Control Strategies of Brushless DC Motor Based on dSPACE,TM33
  21. Study on the Control of Wind Turbine with Grid-Connected,TM614

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > General issues > Basic science > Quality management and quality control > Test > The yarns performance test
© 2012 www.DissertationTopic.Net  Mobile