Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on Recycling for Liquid Crystal Display Panel Glass

Author: JiangHao
Tutor: WangYuLin
School: Hefei University of Technology
Course: Mechanical and Electronic Engineering
Keywords: LCD screen LCD panel Glass substrate Recycle Ultrasonic Nondestructive separation
CLC: X705
Type: Master's thesis
Year: 2013
Downloads: 63
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of liquid crystal display technology, LCD displays have occupied a dominant position in the display fields of electronic equipments. However, a large amount of wasted LCD panels appeared with the widespread application of the LCDs at the same time. In addition, due to the complexity of the LCD manufacturing procedure, a lot of substandard products will inevitably be produced during the liquid crystal panels’manufacturing process. How to recycle these wasted or reuse these defective LCD panels effectively is worthy of being studied.For the wasted LCD panels with mechanical damages on the surfaces, a kind of panel glass treating method is raised based on material recycling. The glass powders can be collected by crashing LCD panels, the rare and precious metal indium and the valuable liquid crystal material can also be recycled in the meantime for the purpose of fully utilizing the wasted resources.For the wasted or substandard LCD panels without mechanical damages on the surfaces, a kind of panel glass treating method is presented in the dissertation. With the aid of ultrasonic wave, the frame sealants between the upper glass and the lower glass of the LCD panel can be dissolved effectively by selecting the proper alkaline solutions or acidic solutions. Different layers of the LCD panel can be separated quickly and nondestructively, and the coated layers of ITO on the panel can also be dissolved. So the complete and clean glass substrates can be got and the rare and precious metal of indium can be extracted. Experiments indicate that the wasted LCD panels and the defective LCD panels on the production lines can be recycled efficiently by this method. The new LCD displays can be made of the recycling glass substrates and the recycling value of the wasted and defective LCD panels can be improved greatly.In view of various wasted LCD panels, the recycling model of "cost-profit" is estimated based on material recycling and glass remanufacturing respectively. Economic assessment of the different recycling methods finally confirms that the joint recycling mode is a higher-yielding method.

Related Dissertations

  1. Research on Mud Density Measuring Method Using Ultrasonic,TE256.7
  2. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  3. Research on Orbit-holding Traveling Mechanism of Pipeline Girth Welds Scanning Equipment,TE973.3
  4. The Preparation and Characterization of Indium Tin Oxide Films on Quartz Optical Fibers,TB383.2
  5. Automated Ultrasonic Testing Method and System for Thickening Area of Drill Pipe,TH878.2
  6. Single-phase current relay protection tester Development,TM774
  7. Study of Ultrasonic Location for Partial Discharge in Transformer,TM855
  8. Medical ultrasound imaging Piezoelectric transducer probe studies,TN384
  9. Based on product quality control of injection molding process,TQ320.662
  10. Developing of Ultrasonic Level Meter Based on DSP,TH816.2
  11. Ultrasonic nondestructive testing high-performance embedded systems and their applications research,TH878.2
  12. Research on the Key Technology of Laser-generated Ultrasonic Nondestructive Testing System,TN247
  13. Study of Process and Characteristics for Underwater Consumable Electrode Arc Cutting,TG484
  14. Design and Research of Tanker Oil Level Measurement System Base on ARM,TE976
  15. Performance of Shotcrete for Infrastructure Rehabilitation in Cold Regions,U414
  16. Synthesis and Characterization of ZnO Films by Ultrasonic Spray Pyrolysis,TB43
  17. Nondestructive Tablet Hardness Testing by a New Laser Ultrasonic Method,TN247
  18. Investigation of Self-Assembly of Xanthan Gum with Atomic Force Microscopy,O561
  19. Aluminum coagulant in water purification sludge recycling and reuse of resource,X703
  20. Application of Ultrasonic Technique in Vegetable Dyes Extraction and Their Dyeing in Wool Fabrics,TS193.8
  21. Study on Mechanical Property of 20# Steel under Ultrasonic Vibration Simple Tension,TG115.52

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Solid waste disposal and utilization
© 2012 www.DissertationTopic.Net  Mobile