Dissertation > Excellent graduate degree dissertation topics show

Modal Analysis and Experimental Research of Discrete-clamped Elastic Plate with Multi-concentrated Mass

Author: ZhangZengJie
Tutor: QiHongYuan
School: Beijing Jiaotong University
Course: Mechanical and Electronic Engineering
Keywords: Multi-concentrated mass Discrete-clamped Elastic plate Analyticalmodal analysis FEM analysis Experimental modal analysis Fundamental frequency PCB
CLC: TB125
Type: Master's thesis
Year: 2014
Downloads: 7
Quote: 0
Read: Download Dissertation

Abstract


The discrete-clamped elastic plate structure with multi-concentrated mass is widely used in the fields of mechanical, electronic, aerospace, etc.Dynamic parameters are determined through the dynamic characteristic analysis, which can provide important design parameters for reliability analysis, fault diagnose, optimal design and dynamic model modification of the system respectively. In this paper, the dynamic parameters of the discrete-clamped elastic plate with multi-concentrated mass are analyzed with analytical modal analysis, finite element method analysis and experimental modal analysis, the completed study as follows:The first, establishment of discrete-clamped elastic plate structure with multi-concentrated mass mathematical model. With the help of related theory of elastic plate bending and law of conservation of energy, vibrating energy function is created according to the analysis of physical structure of discrete-clamped elastic plate with multi-concentrated mass. Then the equivalent change is done by trigonometric function, the first-step modal of vibrating energy function of the discrete-clamped elastic plate structure with multi-concentrated mass is deduced.The second, analytical modal analysis of discrete-clamped elastic plate structure with multi-concentrated mass, amied at the indepth influence and study of model frequency with variety mass on elastic plate. Combined with Rayleigh-Ritz method, fundamental frequency of elastic plate structure with multi-concentrated mass with four bearing points and with eight bearing points can be obtained,then fundamental frequency of elastic plate structure without multi-concentrated mass can also be obtained the factors impacting the fundamental frequency of discrete-clamped elastic plate structure such as material characteristics, clamped manner and the size and layout location of the concentrated mass is analyzed.The third, with the solving ideas and modeling methods of the finite element method, the ANSYS finite element software has been used to make the modal analysis of discrete-clamped elastic plate structure without multi-concentrated mass. Comparing with the result of analytical modal analysis to prove the analytical model is correct preliminarily.The fourth, according to the basic theory of experimental modal analysis, establish the test platform, the experimental modal analysis for the discrete-clamped elastic plate structure with multi-concentrated mass can be achieved, Comparing with the result of analytical modal analysis to prove the analytical model is correct.

Related Dissertations

  1. The Research on Action Mechanism of Additive Used in Through-Hole Copper Plating and Its Selection,TQ153.14
  2. Load Determination of Bench Test and Fatigue Life Prediction of Motorcycle Frame,U483
  3. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  4. Machine Vision’s Research and Application in the SMM of SMT,TP391.41
  5. Design of Sin/Cos to the RS422 Signal Converter,TN911.7
  6. Research on Friction Sliding Isolation Technology for Masonry Structure in Rural Regions,TU352.1
  7. Design of Radar Signal Processing Hardware System Based on TMS320C6416,TN957.51
  8. Simulation and Preparation for IDT/AlN/Diamond Multilayer Films of Surface Acoustic Wave,O484.1
  9. Couple-field Analysis and Structural Optimization of the Fixed Tube-sheet Heat Exchanger,TQ051.5
  10. The System Design of Search Radar Data Processing Based on DSP,TN957.51
  11. Study on User Interface Optimization and Internationalization of Finite Element Analysis System,TB115
  12. Research on Lean Apply in Printed Circuit Boards Manufacture,F426.6
  13. Design of Digital Pre-Distortion Hardware Platform Based on IMT-Advanced Transceiver System,TN929.5
  14. Research on Delamination of Pcb with Supercritical Fluid CO2,X705
  15. Research on Recycling Technology of Key Parts in Post-use Air-conditioner,X705
  16. Implementation of Tempreture Sensors System Based on Wireless Power Transfer,TP212.11
  17. A Research of PCB Protection Under Intellectual Property Law,D997.1
  18. HDI rigid-flex board buried vias Process,TN41
  19. PCB intellectual property protection mode research,D923.4
  20. The Design and Development of Smart Home System Based on STM32,TP273.5
  21. FPGA-based computer interface research and implementation of experimental platform,TP334.7-4

CLC: > Industrial Technology > General industrial technology > Engineering and basic science > Engineering Mechanics > Engineering plastic mechanics,engineering elasticity
© 2012 www.DissertationTopic.Net  Mobile