Dissertation > Excellent graduate degree dissertation topics show

Research Power Control of Ultrasonic Power Supply

Author: LiBingYi
Tutor: Ding
School: Henan University of Science and Technology
Course: Control Theory and Control Engineering
Keywords: Ultrasonic Power Supply Phase Shift Control Frequency Tracking Phase Locked Loop Fuzzy Control Matching Network
Type: Master's thesis
Year: 2013
Downloads: 34
Quote: 0
Read: Download Dissertation


In recent years, ultrasonic cleaning technology has been widely applied in manyfields because of its low cost, high degree of automation and good cleaning effect.Ultrasonic power supply is the core part of the ultrasonic cleaning machine. Therefore,needs of a new generation ultrasonic power supply are becoming more and moreurgent. In this paper, the analysis and summary based on previous studies areintroduced. At the same time, relevant information and literature are consulted.Combining with fuzzy control technology, phase-locked loop(PLL) technology, soft-switching technology and phase shift PWM technology, a new ultrasonic power supplywhich used DSP control chip TMS320LF2407A as the core is researched.The main content of this article includes:(1) In aspect of power inverter selection,in consideration of the issues of power mainly for the high-frequency band, seriesresonant inverter is choosed in this artical through the analysis and comparison of theseries resonant inverter and parallel resonant inverter.(2) In aspect of power control,PS-PWM power adjustment technology is used through analyzed and compared withseveral representative power adjustment. Moreover, using soft switch technology canreduce switching losses. The power method can achieve the continuous adjustment ofthe output power of the ultrasonic power supply.(3) In the aspect of frequencytracking, in order conquer the shortcomings of traditional frequency tracking method,a novel requency tracking control strategy based on the fuzzy control combined withdigital phase-locked loop (Fuzzy-PLL) has been proposed, which searches the loadresonance frequency through the fuzzy control and utilizes accuracy of phase-lockedloop frequency tracking circuit to realize frequency automatic tracking and alwaysensure transducer load work on the resonant frequency.(4) Meanwhile, a improvedseries resonant matching network is used based on detailed analysis of sevseal tuningscheme, which meets the system requirements for impedance matching and improvesthe adaptive capacity of the matching circuit on the transducer changes in electricalparameters. The last, simulation models based on the analysis of ultrasonic power powercontrol and frequency tracking have been simulated. Experimental results show thatthe design could achieve continuous adjustment of output power and frequencytracking automatically. The experiment proved high reliability, good performance, andadaptability. In addition, switching losses are reduced and the efficiency of the systemis improved with the use of the soft-switch technology. It has brightness way in future.

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  3. Research on Automatic Control System of Hump Push Peak Speed Based on Fuzzy Neural Network,U284.6
  4. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  5. The Simulation Perfermence and Analysis for Election Control Hydraulic Litmitedslip Differential of Loader Based on Fuzzy Control,TH243
  6. Research of Energy Saving Control System of Pumping Unit Based on Fuzzy Control with Self-tuning of Scaling Factor,TE933.1
  7. Research on Clutch Engagement and Simulation of Automotive Mechanical Transmission,U463.211
  8. The Study on Control Strategy of the Electro-hydraulic Servo Running Deviation Control System,TP273
  9. Excitation System Design and Research of High-frequency Fatigue Machine,TH871.3
  10. Robustness Analysis of Interval Type-2 Fuzzy Logic Systems,O231
  11. Design of Dedusting System on Crushing Plant of Shale Refinery,TE968
  12. Research on pH Value of the Control Technology for Acid-contained Wastewater Integrated Treatment System in Ningxia Hengli,TP273
  13. Study on Industrial Boiler Water Level Control System,TP273
  14. Active Queue Management of Wireless Access Network,TN925.93
  15. Simulation Analysis of Semi-Active Suspension Based on Fuzzy Control,U463.33
  16. Study on Autoleveller System of Drawing Frame Based on Adaptive Control and Fuzzy Control,TS103.3
  17. Study of Key Technology of Ld Laser Cooling System,TN248
  18. Design and Implementation of Control System for CNC Machine Tool Based on SPCE061A SCM,TG659
  19. Study of Precise Positioning and Antiswing for the Varying Rope Length in 3D Crane Base on Decouping and Fuzzy Control,TH21
  20. High-Performance Ofyaw Controlsystem’s Research of Wind Power,TM315
  21. Arithmetic Investigation of the Large Telescope Servo Control System Based on the Brushless DC Motor,TH743

CLC: > Industrial Technology > General industrial technology > Acoustic engineering > Ultrasonic Engineering
© 2012 www.DissertationTopic.Net  Mobile