Dissertation > Excellent graduate degree dissertation topics show

A Simulation and Experimental Study on Loading Property of Small Hybrid Bearing

Author: HongYang
Tutor: LiWei
School: Zhejiang University of Technology
Course: Mechanical and Electronic Engineering
Keywords: hybrid bearings computer simulation loading capacity spiral oil chamber
CLC: TH133.3
Type: Master's thesis
Year: 2013
Downloads: 14
Quote: 0
Read: Download Dissertation

Abstract


Bearing is a key component in the spindle of machine tool. It influences the working performance and useful life span of spindle directly. Hybrid bearing combines the effect of hydrodynamics and the static pressure to develop a new type of bearing. The new bearing has higher speed, smaller starting torque, higher rotary precision, etc. This bearing will play an important role for the improvement of the machine tool in China.Recently, most size of hybrid bearings which are researched in China are larger than diameter60mm and the size which are smaller than diameter25mm are few. In this paper, some computer simulation and experimental study to research working property of hybrid bearing with small size of diameter25mm have been carried out. The main research works and achievements are as follows:(1) Researching on the principle of working for small size hybrid bearing, studying of the relationships between working loads and the actual force on bearing with stress analysis.(2) Constructing3-D modeling for small size hybrid bearing and making computer simulation to research the relationships between oil pressure, eccentricity, bearing speed and loading capacity.(3) Developing an experimental system which used for measuring load force and the displacement of spindle.(4) Measuring of the radial displacement of spindle in various working parameters such as eccentricity of spindle, oil pressure and working speed, analyzing of influence of those working parameters on the radial displacement and loading capacity of spindle with computer simulation. The study results showed that the oil supply pressure and eccentricity of spindle impact on loading capacity of bearing remarkably. The influence of spindle speed on the loading capacity of bearing are observable with some lower oil pressure, but if the oil pressure is higher, the spindle speed influence on loading capacity of spindle become indistinctively. When the eccentricity of spindle is larger than a critical value, the rigidity of spindle increases quickly and the critical value is between0.7and0.8in this experiment.In this paper, the small hybrid bearing are simulated in computer and perform experiment about the bearing property of small hybrid bearing. The result of this study is helpful for engineering application and study of small hybrid bearing.

Related Dissertations

  1. The Computer Simulation of Roller Drying for Flaky Agriculture Materials,S226.6
  2. Research on Bus Collision and Rolling Simulation Technology,U467.14
  3. Research on the Theories and Simulation of Excavation Track Control for Electric Excavator,TU621
  4. Numerical Simulation and Influence Factors of Heat Transfer Cooler,TQ021.3
  5. Acoustic Environment Prediction and Impact on Human Annoyance of Street Building,TU112
  6. Identification and Simulation of HBV Dynamic Model,R311
  7. Li ferrite temperature Preparation and simulation applications,TM277
  8. Design of Successive Steel Structure Spray Health Controller,TU64
  9. Study on the Ecological Architecture Design of the Earthen Heritage Site Museum in Northwest of China,TU242.5
  10. Research on Operating Coach Rear-end Collision Simulation and Rear-structural Crashworthiness,U467.14
  11. Vibration Characteristics of TBM disc cutter vertical,U455.3
  12. Research on the Free Impaction of Balance Impact Roller,U415.521
  13. Mathematical Model and Short Memory-based Controller Design of Multi-UAVs,V249.1
  14. Mine Pit Hot Environment Forecast Technique Research and Numericl Simulation System Development,TD727
  15. Aesthetics and Application Research of Pantaome Buildings,TU208.5
  16. Solidification Simulating Technology Used in the Pruoduction of the Plate Casting,TG244.3
  17. Technological Analysis of Decarbonation Process in Ammonia Synthesis Plant,TQ113.26
  18. Research on Simulation Based Construction Scheduling of Longkaikou Rcc Gravity Dam,TV511
  19. The Theoretical Analysis and Computer Simulation of Large Deformation and Dynamic Contact on the Inertia-Enforced-Speed Limiter,U463.51
  20. The Study of Vehicle Frontal Impact Crush and Its Thin-Wall Component Energy Absorption,U467.14
  21. The Research to Controlling Method of Semi-active Suspension,U463.33

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Moving parts > Bearing
© 2012 www.DissertationTopic.Net  Mobile