Dissertation > Excellent graduate degree dissertation topics show

Study of Large Flow2D Electro-Hydraulic Proportional Directional Valves

Author: LiWei
Tutor: RuanJian
School: Zhejiang University of Technology
Course: Mechanical and Electronic Engineering
Keywords: 2D directional valves large flow compression-torsion coupling of slidingwedge type dynamic simulation static characteristics
CLC: TH137.5
Type: Master's thesis
Year: 2013
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


Electro-hydraulic proportional valves are one kind of components which can output proportional pressure and flow rate according to the input current signal by producing displacement of the spool and changing the orifice size. Because of their high rate of quantity and price, and they can meet the technical requirements of ordinary civilian industry, they have become a common part of the hydraulic system. Electro-hydraulic proportional directional valve can not only change the direction of the flow but also the flow rate according to the input signal and it is the important part of electro-hydraulic proportional valves. In this thesis, a two stage proportional directional valve without a seperate pilot valve, large flow2D electro-hydraulic proportional directional valve, has been studied.The2D electro-hydraulic proportional directional valve is composed of2D valve, compression-torsion coupling and electromechanical transducer(proportional electromagnet). The innovative ideas in this thesis is that by the compression-torsion coupling’s function of thrust-torque converter, the thrust of proportional electromagnet has been converted to torque to rotate the spool of2D valve. Thus, the pressures across the spool would change differently. Then, the spool will move by the pressure difference. Therefore, we could realize the target of controlling the direction and flow rate. This valve has both the advantages of direct-acting valves and pilot valves, and can not only work under high pressure and large flow, but also has the advantage of simple structure, and can work under zero pressure or low pressure conditions like direct-acting proportional valves.This thesis firstly summarized and analysed the technical characteristics and development status of the electro-hydraulic proportional control technology, and discussed the advantages and disadvantages of the existing proportional directional valves. Then, make research of2D electro-hydraulic proportional directional valve, the main research contents and results are as follows:(1) Based on the analysis of the servo screw mechanism, for the purpose of reducing the processing costs and meeting the general civil industry, an innovative large flow2D electro-hydraulic proportional directional valve’s structure and principles of it have been carried out.(2) The mathematical model of pilot stage was established, then, the stability analysis and dynamic simulation was carried out by using the Matlab software. Meanwhile, the structure parameters affecting on dynamic characteristics was analysed, providing a theoretical basis for the structural optimization.(3) We have expounded the design about the structure and parameters of the compression-torsion coupling of sliding wedge type, the valve body and the spool.(4) The digital proportional controller which was used in the experiment was described. Then, some experiments which was about the displacement input-output behavior of sliding wedge type compression-torsion coupling and the static flow characteristics have been taken. At the same time, we have researched and analysed those experimental data.

Related Dissertations

  1. The Study of Dynamic Simulation of the Passive Dynamic Quasi-Quarupedal Walker,TP242.6
  2. Gatling machine gun in a modeling and simulation analysis,TJ24
  3. TVM subway ticket design and analysis of the transmission device,U293.22
  4. Prediction and Simulation of Air Quality of Coal Mining Area Based on VGIS System,X831
  5. Centrifugal Flying Shear Dynamic Analysis and Optimization of Drive System,TG333.21
  6. Based on Reverse Engineering Principles Study on Non-circular Gears Rotary Transplanting Mechanism,TH132.41
  7. The Design and Analysis of a Large Stewart Platform,TH112
  8. Mechanism Design and Motion Control Realization of Seven Freedoms Robotic Arm Driven by Pneumatic Artificial Muscles,TP242
  9. Rational Drug Design Against β3-AR and GLP-1R Related to Type Ⅱ Diabetes Mellitus,R914.2
  10. Steady-state, Dynamic Simulation and Optimization of Acetylene Hydrogenation Reactor in Ethylene Plant,TQ221.211
  11. Tower-belt Structural and Dynamic Characteristics Simulation Analysis,TH213.3
  12. Study on the Control System and Experiments on Voltage Compensation Type Active Superconducting Fault Current Limiter,TM56
  13. Research on Low Voltage Ride Through Technology of the Grid Connected Doubly Fed Wind Generator,TM315
  14. System Design and Dynamics Analysis of a Rail Vehicle with High Acceleration,U270.1
  15. Study on the Structure of a New Type High Precision Adjusting Platform with Two-dimension,TH703
  16. Dynamic Simulation and Experimental Research of Structure Drived by Laser Shock Wave,TN249
  17. Designing and Characteristic Research on the Automatic Fluid Rate Limiting Device,TH137.52
  18. High flow conditions P2P streaming real-time behavior recognition system design and implementation,TN919.8
  19. Marine seismic streamer Dynamic Simulation Study Attitude,P715
  20. KES -based physical model tests of the fabric and appearance of the static and dynamic simulation,TS101.923
  21. Parallel pilot control servo valve Mathematical Model and Control Algorithm,TH137.52

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Hydraulic transmission > Hydraulic components
© 2012 www.DissertationTopic.Net  Mobile