Dissertation > Excellent graduate degree dissertation topics show

Study on Condition Monitoring and Fault Diagnosis of the Large-tonnage All-terrain Crane

Author: ZhangQiong
Tutor: RenWeiJun
School: Chang'an University
Course: Signal and Information Processing
Keywords: large-tonnage all-terrain crane data storage expert system fault diagnosis
CLC: TH21
Type: Master's thesis
Year: 2013
Downloads: 14
Quote: 0
Read: Download Dissertation

Abstract


The large-tonnage crane is commonly controlled by the hydraulic pressure and theelectricity, the control system is getting more and more complex. It has been unable to makethe quick and accurate judgment of the crane’s working condition only with personalexperience. Therefore, it is very important to develop a condition monitoring and faultdiagnosis system of large-tonnage all terrain crane in order to maintain and analyze the causeof fault. This thesis refers to the successful utilization of black box on the plane andintroduces the concept to the field of crane. It can record and store the operation data.This thesis includes the following aspects:First of all, develop a storage strategy of the black box data: In order to ensure thereal-time and reliability of data storage, record the operation data to RAM which is with thebattery. When RAM is filled with512KB, and then stores these data to the SD card.Secondly, combining with the virtual instrument technology, complete the manualanalysis of the data. Using virtual instrument controls under the Visual Studio2008development platform. Display these data in the form of a table or two-dimensional map,three-dimensional map. The man-machine interface is more attractive.Finally, this thesis researches the key technology about fault diagnosis of crane and putsforward a kind of solution based on expert system. Knowledge base is built with theparticipation of experts in the field. Then the system gives the conclusion after comparing thestatus of data volume with the fact in the knowledge base and further reason. Further more,“the crane status automatically examination” is applied in the automatic scoring strategystudy.Through an example, the expert system for fault diagnosis of crane can obtain accurateand correct results. But if the system is put into practice，the hardware and software must befurther perfected and debugged.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. Fault Diagnosis Method Based on Support Vector Machine,TP18
  4. Fault Diagnosis Research on Three-Tank System,TP277
  5. Design and Implementation of the HL7 Message Parsing and Store in the Medical Information Integration Platform,TP311.52
  6. Research on the Key Technology of Waterborne Transport Security System,U698
  7. Development of Domestic Entry Plant Quarantine Expert System,S41-30
  8. The overall design and system development RTAD-CMDMDES of,U279.3
  9. Based on Fuzzy Neural Network Fault Diagnosis of Expert Systems,TP183
  10. Research of Support Vector Machine Based Fault Diagnosis System,TH165.3
  11. Fault Diagnosis Method Study of Hydraulic System of Concrete Pump,TU646
  12. Stage Fault Diagnosis Based on Data Fusion,TP18
  13. Research and design of the radar circuit board fault diagnosis system hardware integration,E933.6
  14. Steam Turbine Thermal Analysis and Modeling Principles and Operation Fault Diagnosis,U664.113
  15. Synthesis, Microstructural and Optical Properties of Pr3+ Doped 12CaO·7Al2O3 Powders,TB383.3
  16. Research of Fault Diagnosis Method of Analog Circuit Based on Improved Support Vector Machines,TN710
  17. Design and Simulation on Topology Reconstruction Scheme in Ad Hoc Networks,TN929.5
  18. Real-time Pressure Monitoring and Fault Diagnosis of High-pressure Spray Descaling System,TG333
  19. The Method of Transient Modeling and Parameter Identification and Its Application in Rotating Machine Fault Diagnosis,TH165.3
  20. GPRS-based transformer fault diagnosis system,TM407
  21. Study on Decentralized Fault Diagnosis Based on Multiblock Kernel Methods,TH165.3

CLC: > Industrial Technology > Machinery and Instrument Industry > Lifting machinery and transport machinery > Lifting machinery
© 2012 www.DissertationTopic.Net  Mobile