Dissertation > Excellent graduate degree dissertation topics show

Study on the Operating Characteristic of Reed Valve in Rolling Piston Compressor for Household Air Conditioner

Author: JiangHui
Tutor: PanShuLin
School: Guangxi University
Course: Chemical Process Equipment
Keywords: rolling piston compressor reed valve winding model circular arc lift limiter Rally-finite elementmethod moment law ANSYS/LS-DYNA impact stress
CLC: TH45
Type: Master's thesis
Year: 2013
Downloads: 58
Quote: 0
Read: Download Dissertation

Abstract


The reed valve with a circular arc lift limiter is widely used in rolling piston compressor for household air condition. Because of the differences of operating characteristic between rolling piston compressor and reciprocating compressor, the design method and operating characteristic of their reed valves are different. A circular arc lift limiter can reduce the stress of valve root, but the movement law of valve plate is approximated as a winding model, which is difficult to calculate by using the beam or plate model. Therefore, it is necessary to develop some methods for the design and operating characteristic study of the reed valve.In this paper, the reed valve with a circular arc lift limiter in a rolling piston compressor is designed, and formulas for calculating the average Mach number and resistance loss of gas flow in the valve play are derived. With the variation of free segment length of valve plate in the winding process, the equivalent motion mass and elastic force of valve plate is changing constantly. Then the stiffness curve of valve plate is found by static analysis. Based on a single mass model, stiffness curve of valve plate and the gas flow differential equation of discharge process, the mathematical model of reed valve is established, and then solved by using the Runge-Kutter method in the Visual Basic software. Comparative study on the movement law of valve plate with the circular arc lift limiter and the linear one at different rotation speed of compressor, the influence of rotation speed of compressor and the molded line of lift limiter are researched, then an improvement suggestion is gave for the vibration of the head of valve plate with a circular arc lift limiter. In order to calculate the initial velocity of valve plate impacting against the seat, the energy conservation principle is used between the impact kinetic energy and elastic energy of valve plate, and the elastic energy can be calculated when the valve plate is whole winding along the circular arc lift limiter. In order to study the impact stress and its distribution of valve plate against the seat, the equivalent mass coefficient, concentrated load coefficient and impact load coefficient are calculated by using the simplified impact model which is established on the Rally-finite element method. Then the nonlinear explicit dynamic analysis software ANSYS/LS-DYNA is used to simulate the impact process of reed valve against lift limiter and valve seat, and the effect of inertia to the wind model is analyzed. The dynamic responses of valve plate from the result of simulation verified that the winding model and Rally-finite element model are reliable for the study of the operating characteristic of reed valve in rolling piston compressor. Lastly, the calculation programs for the curve of stiffness, initial impact velocity, moment law, and energy consumption of valve plate are compiled with the Visual Basic software. It is convenient to develop the computer aided design and solve practical engineering problems.

Related Dissertations

  1. Numerical Simulation Research on Optimal Milli-second Delay Time with Many Free Surfaces Hole by Hole Blast,TD235
  2. Simulation of Clutch Cushion Segment Forming and Springback Analysis,TG386
  3. Reserch on the Simulation and Optimization of Self-Piercing Riveting Process for Dissimilar Materials,U466
  4. Piston refrigeration compressor PV diagram of the test system,TB652
  5. For small spacecraft cone - rod flexible wall docking mechanism design studies,V526
  6. Analysis of Impact Factors of Mining Chain on Stuck State,TD528.3
  7. Reinforced concrete load-bearing column in the blast loads dynamic analysis,TU352.13
  8. The Structure Strength Analysis and Optimization Design of Impact Wheel for Impact Roller,U415.521
  9. CFRP Reinforcement Theory Analysis of Bridge Pier Columns with Large Diameter,U443.22
  10. Considering soil - structure interaction railway bridge height limit protective frame and the power of the ultra-high vehicle collision response analysis,U441
  11. Study on Properties of Solid Particle Erosion Resistance CrN_X Coating,TG174.44
  12. Work roll elastic deformation under the aluminum cold rolling simulation and research,TG339
  13. Numerical Simulation Study on Blast Induced Collapse of Thin Wall Tubular Structures Using LS-DYNA,TU746.5
  14. The Numerical Simulation of Geological Applicability of Spoke Wheel,U455.43
  15. Nonlinear Seismic Response Analysis of Large-span Cable-stayed Bridge Soil-structure System,U448.27
  16. Noise and Vibration’s Optimization of Rotary Compressor,TB652
  17. Numerical Simulation on SHPB Experiment for Rock,TU458
  18. Drilling Water Injection Pressure Impulses Crack Gas Drainage Technology Research,TD712
  19. Three-roll planetary rolling mill process force analysis,TG333
  20. 3D Dynamic Simulation Analysis of Thin-Wall Parts Forming Process Based on ANSYS/LS-DYNA,TG386
  21. Unstable Analysis and Collapse Simulation of Frame Construction by Blasting Demolition,TU746.5

CLC: > Industrial Technology > Machinery and Instrument Industry > Gas compression and transportation machinery > Compressors, compressor
© 2012 www.DissertationTopic.Net  Mobile