Dissertation > Excellent graduate degree dissertation topics show

Optical Cavity Laser Stabilization Based on LabVIEW and the Application in Sr Optical Clock

Author: RenJie
Tutor: ChangHong
School: Graduate School , Chinese Academy of Sciences ( National Time Service Center )
Course: Test and Measurement Technology and Instruments
Keywords: Sr optical clock repumping laser cavity transfer stabilization digitalservo system
CLC: TH714
Type: Master's thesis
Year: 2013
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


Attribute to optical clock’s precision and stabilization, it may be the standard ofnext generation of time and frequency. Sr optical clock are now being researched inNational Time Service Center. The two repumping lasers in the1stcoolingcorresponding to the transitions of(5s5p)3P→(5s6s)30S1and(5s5p)3P→(5s6s)32S1,which the lower state is metastable, are difficult to be lockedthrough the atomic transition line.In this paper, the author combined the virtual instruments technology with the Srclock’s research and introduces an automatic servo system compiled with LabVIEWwhich can lock the two lasers simultaneously in any frequency value by an F-P cavity,transferring the stability of He-Ne laser to the two repumping lasers. The programsearch the lasers’ transmission peaks of F-P cavity and get the error signal, then feedback the negative feedback voltage, calculating by the PI algorithm, to the lasers. Also,this program, with a visual interface and the merits of easy operating, can lock thelaser directly and record the data automatically. The frequency fluctuations of thelocked lasers’ are about±4MHz.The paper also recorded the experiment which inject the two locked repumpinglasers into the blue MOT and observe the results. And the performance of the blueMOT got a notable improvement; the intensity of the trapping atoms was12timesthan the past, the lifetime of blue MOT prolonged13times. The results can affordgood experiment data and foundation for the nest2ndcooling in Sr clock’s research.

Related Dissertations

  1. Development of698nm Narrow-linewidth Lasers,TN248
  2. Research on Women Watches’ form and Color Design Based on Kansei Engineering,TH714.52
  3. Watch semiotics based design studies,TH714.52
  4. Realization of First-stage Cooling of Strontium for the Optical Lattice Clock,TH714.1
  5. The Research of the Matching System of Balance Wheel and Hair Spring Based on the Virtual Instrument,TH714
  6. Study on Time Interval Measuring Technology Based on TDC,TH714
  7. Investigations on Radiation with Millihertz Linewidth Based on Four Wave Mixing Scheme,TH714.14
  8. Research of the Key Technique of CPT Atomic Clock’ Stability,TH714.14
  9. Tourbillon mechanical watch Analysis and Improvement,TH714.5
  10. Perpetual calendar watches institutional research,TH714.52
  11. Watch splint part of the process of,TH714.52
  12. Research on Clock Frequency Calibration and Synchronization Technology,TH714.1
  13. Design and Implementation of the interval measurement experimental teaching system,TH714
  14. The Design and Realization of Automatic Minute Pinion and Axle Assemble System,TH714
  15. Design and Implementation of Standard Clock System Based on the GPS,TH714
  16. Facility & Processes Research on the Fabrication of Atomic Clock Alkali Vapor Cell,TH714.14
  17. Modern watch design study,TH714.52
  18. Measuring the time of the United States,TH714.5
  19. The Design and Realization for the Decoding of Electric Wave Clock Based on Radio Singnal,TH714
  20. Analysis and Improvement on the Horological Chronograph Mechanism,TH714.52
  21. Research on Design and Packaging of the Micro Atomic Clock’s Rb Vapour Cavity,TH714.14

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Measuring instruments > Time - measuring instruments
© 2012 www.DissertationTopic.Net  Mobile