Dissertation > Excellent graduate degree dissertation topics show

Research on High Precision of Inertial Measuring Combination in Temperature Field Modeling and Optimization Design

Author: JiangYuePeng
Tutor: LiuRong
School: Hangzhou University of Electronic Science and Technology
Course: Mechanical Engineering
Keywords: SINS Thermal analysis Thermal test Optimization design Simulated analysis
CLC: V249.32
Type: Master's thesis
Year: 2014
Downloads: 2
Quote: 0
Read: Download Dissertation

Abstract


The strapdown inertial navigation system is a navigation system capable of continuousoutput information such as position, velocity, and posture. The precision of inertial navigationis mainly decided by the inertial sensors. SINS has a high sensitivity to temperature,especially during the process of high altitude flight, SINS is prone to high temperature, thusgreatly affect the precision and working stability of the system. Therefore, to solve thestrapdown inertial navigation system’s thermal Dissipation is the necessary condition toguarantee the normal work of the system.This paper is based on the study of the heat source of the parts in SINS, design the wholemachine structure, carry out the temperature field modeling and thermal analysis to verify theaccuracy of the model by experiment, and optimize the design.First analyzes in detail about the cooling way of the SINS, and choose the best way ofcooling. Through the analysis of the temperature field of the SINS, according to thecharacteristics and requirements of each heat source, to design the interior structure. Inertialsensor has a high sensitivity to temperature, during the design process we need to make surethe surface contact with the shell as much as possible. To reduce the influence on the inertialsensor of other large heat source, need to isolate them. In the design process in addition toconsider the thermal design of each device, such as layout, installation, and under the requiredstiffness, we need to keep the quality of the SINS as small as possible.Secondly, the thermal analysis software of Icepak is adopted to design the SINS’stemperature field modeling and simulation analysis. Because of the SINS is a complexstructure, the thermal model of the SINS are simplified, equivalent, model transformationanalysis, the calculation of the thermal model were carried out on the Icepak software. Get thetemperature distribution chart of the SINS. The SINS’s surface temperature from38.9℃to42℃, the average temperature of the fiber optic gyrois43.5℃, it is result that thetemperature distribution of the SINS is uniform, small temperature difference between theshell and gyro.Designed of SINS through the non-contact and contact way to carried out thetemperature test on the prototype, compared the results with the simulation results to verifythe accuracy of thermal analysis model. In the guarantee of the accuracy of the model tooptimize the temperature field of the SINS design. Main optimization scheme is to change the installation surface of the fiber optic gyro, increase the contact area between the quartzflexible accelerometer and the intermediate housing, add thermal pad. Finally afteroptimization, the highest temperature of the SINS’s intermediate housingis40.98℃, with ageneral decrease6.22%. The highest temperature of the fiber optic gyro shell is42.52℃, witha general decrease5.64%.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Algorithm Research on SINS/GPS Integrated Navigation Syste,V249.328
  3. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  4. Research on Transfer Alignment of the Missile Onboard the Aircraft,V249.322
  5. Transient Thermal Analysis of Multi-Body System with Complicated Boundary Conditions,TK124
  6. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  7. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  8. Medical Application of a Wireless Communication Platform Based on RFID and GPRS,R319
  9. Oil sludge production and use of coal- water slurry experimental study,TQ536
  10. Study of Optimization Design of Asymmetric and Much Support Floating Raft Isolation System,TB535.1
  11. The Plastic Sheet Surface Spraying Technology’s Exploit Research,TQ320.67
  12. Research on Optimum Design of Plantary Gear Transmission Mechanism for Cutterbar,TH132.41
  13. Dynamics Analysis and Optimization Design of Hydraulic Excavator Working Equipment,TU621
  14. A Study on Optimization Design of SD Company’s Electronic-Human Resource Management,F272.92
  15. Transient Thermal Analysis of Spiral Bevel Gear under the Condition of Dry Operation,TH132.41
  16. Steam Turbine Thermal Analysis and Modeling Principles and Operation Fault Diagnosis,U664.113
  17. Modal Analysis of BIW Construction & Optimization Design in Modal Parameters,U463.82
  18. FEA of the Small Multi-function Chassis Frame and Its Lightweight Design,S223.91
  19. Dynamics Analysis and Optimization Design of Star Wheel Loading Mechanics,TD421.5
  20. Experiment Research on the Characteristics of 065-2 Coal Seam Spontaneous Combustion in the Gu-shan Mine,TD752.2
  21. Research narrower than the opening Kita highly optimized root,TU347

CLC: > Aviation, aerospace > Aviation > Aircraft instrumentation,avionics, flight control and navigation > Flight control system and navigation > Navigation > Navigation system
© 2012 www.DissertationTopic.Net  Mobile