Dissertation > Excellent graduate degree dissertation topics show

Study on Improvement Measures of the Beam End Deformation Allowable Value Based on Ballastless Track Static Properties

Author: YangLu
Tutor: ZhouZhiHui
School: Central South University
Course: Civil Engineering
Keywords: high speed railways ballastless track beam enddeformation fastener system allowable value
CLC: U213.244
Type: Master's thesis
Year: 2013
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


When ballastless track is laying on bridge, the deformation of beam end will cause uplift force and down force at the rail joint of the beam end nearby. The deformation of beam end also produces the rail bending stress.If the uplift force acting on the concrete slab is large, the whole concrete slab may lose stability. The problems seriously affect the safety of track structure. In this paper, some measures are researched to improve load-carrying capability of track structure. As special fasteners is set in the beam ends, the allowable values of the beam end vertical angel are studied. The main contents and contributions are as follows.1. By comparing the related high-speed railway specifications of China,Japan and Germany, the limit value of the beam end vertical angel in China specification is testified to be the strictest.. Besides, by the three vertical stiffness limit values (beam end of vertical angel, mid-span deflection, natural frequency) are compared, and the vertical angel limit value of beam end is found to play an control role.2. The finite element model for beam-track static analysis is established, and the cases with different combinations of vertical angel and vertical downward displacement in the end of beam are calculated.The results show that the combination with bearing counterclockwise rotation in one end of the beam and downward diaplacement in the other end of beam is the most unfavorable case of beam end deformation.For the most unfavorable case, controlling indexes for beam-track structure are analyzed and it can be found that the stability of bed board in beam end and uplift force of fastenersare the controlling indexes for load-carrying capability of track structure.3. The influence factors on the load-carrying capability of track structure are analyzed. The results show that overhang length of the beam end bearing and fastener joint stiffness are two major influencing factors, fastener spacing on the bridge has little effect the load-carrying capability of track structure. Addtionally, CRTS Ⅱ slab track is of the best flexibility for the end of beam deformation.4. Analyzed several measures for reduced beam end track force,the result indicate that when set the joints and hinges above the upper supported structrue or introduct the transitional plate structrue between the beam end,will be on improving the track structure force play an significant effect.5. The stability of bed board in beam end and uplift force of fasteners are easy to reach their allowable value. In order to raise pullout capacity of the beam end fastener and solve the stability problem of the bed board, PBNDROL SFC fasteners with large initial deduction pressure are set near the end of the beam, and pegs are set between the bed board and beam end When these measures are adopted, the corresponding allowable values of vertical angel are obtained. The new allowable values are larger than the existing limit values in the code. Therefore, the new limit values of vertical corner of beam end can provide references for the design of vertical stiffness for high speed bridge.

Related Dissertations

  1. Ballastless track high-speed railway CFG pile - raft composite foundation settlement calculation,U213.1
  2. Study on 3D Checking System for the Ballastless Track in the High-speed Rail Way and Its Error Analysis,U216.3
  3. Non- ballasted track construction measurement and control of key technologies,U215
  4. Researching on Stable Performance of Ballastless Track Embankment Structure in Beijing-Tianjin Passenger Transport Line,U213.1
  5. The Research of Cement Emulsified Asphalt Mortar in Ballastless Slab Track of High-speed Railway,U214
  6. New Construction Technology Research of Ballastless Track,U213.244
  7. The Research of Tight Curve Radius of Ballastless Track Strucure of Passenger Traffic Railway,U213.244
  8. Analysis of Long-Term Test of High-Speed Railway Ballastless Embankment and Transition,U213.1
  9. Study on Post Creep Deformation Effect of Long-span Concrete Bridge with Ballastless Tracks,U448.213
  10. Study of the Key Technologies of High-speed Ballastless Track Construction and Dynamic Characteristics of the Standard Span Bridge,U213.244
  11. Dynamic Analysis and Research on Vibration Control of Transfer Station Structure,TU311.3
  12. Research on the Durability of Foundation Plate in Continuous-Slab-Track on Bridge,U213.244
  13. The Ballastless Track general reference map series division plan,U213.244
  14. The Research for Drawing Process of High Speed Railway’S Track Template,TG386.32
  15. Study of Rail Grinding Profile,U213.4
  16. Study on the Defoemation and Structure Adaptability of Subgrade,U213.1
  17. Research on the Management System of Ballastless Track Manufacturing Quality,U213.244
  18. Study of the Effects of Deflextion-Angle of Carrying-Axletree of Semi-Trailer on the Performance of Tractor-Semitrailer,U469.53
  19. Subgrade on vertical dynamic response of the Züblin Track System,U213.244
  20. Borg of slab track bridge transition section vertical dynamic response analysis,U441.3
  21. Dynamic Analysis of Subgrade and Bridge-Subgrade Transition Section of High Speed Railway under the Vehicle-Subgrade Coupling Condition,U213.1

CLC: > Transportation > Rail transport > Railway Line Project > Line constructed > Track > New rail foundation > Ballasted track
© 2012 www.DissertationTopic.Net  Mobile