Dissertation > Excellent graduate degree dissertation topics show

The Fuzzy Temperature Control System of Sintering Furnace Based on OPC Technology

Author: ZhouJinFeng
Tutor: XiaoShenPing
School: Hunan University
Course: Control Theory and Control Engineering
Keywords: Cemented Carbide Vacuum Sintering Furnace Temperature Control System Fuzzy PID OPC
CLC: TP273
Type: Master's thesis
Year: 2011
Downloads: 44
Quote: 0
Read: Download Dissertation

Abstract


Cemented carbide is widely used in fields of national economy, such as mechanism、automobile、electron, etc. The vacuum sintering furnace is the key equipment in cemented carbide production. Its sintering temperature must strictly obey the temperature control curve of the production technology of the processed products. Because of the dynamic feature of the vacuum sintering furnace has nonlinear、time-variables characteristics, such as the pure delay time has a wide range of nonlinear changes with the furnace temperature, the unequal weight of the sintering products result in a wide range thermal inertia, etc. Therefore, the problem of the sintering furnace’s temperature control is the key problem in cemented carbide agglutination process.In view of the problem that the sole PID control method can not solve the temperature control of the vacuum sintering furnace efficiently in traditional manufacturing methods, the paper proposed a intelligent control method based on fuzzy PID. This method uses a lot of intelligent algorithm such as fuzziness of inputs、fuzzy reasoning、fuzzy decision、difuzzification certainty of outputs, etc. This method can optimize、estimate and adjustment the three parameters of the PID controller to enables the control effect to achieve the predetermined target and to meet the demand of the production. Simultaneously, the thesis dissertates emphatically the application of OPC technology in sintering furnace temperature control system. The OPC technology breakthrough in the condition that the driver dependence of the procedure production and the hardware and the software of the equipment in traditional sense. So long as the both sides have the interfaces that can meet the OPC criterion, the two sides can realize a instant and accurate communication through programming. The paper adopts the synchronous communication mode to realize the communication between WinCC and the application of upper machine. We can acquire the related data information quickly and precisely in sintering process based on OPC technology, and we can also optimize the production process and realize the remote monitoring based on this technology.The practice indicated that the temperature control method based on the methods above can satisfy the technique of production request effectively. The agglutination performance of vacuum sintering furnace improves obviously, this temperature control system is feasible and effective.

Related Dissertations

  1. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  2. Design of Fuzzy PID Controller Based on FPGA,TP273.4
  3. Research on Modification and Application of Particle Swarm Optimization Algorithm Based on Control Methods,TP301.6
  4. The Research of Die Casting Machine’s Real-time Control System Based on ARM,TP273
  5. Research on Control of the 3DOF Hover,V249.1
  6. Optimization Research on Parts of Thermal Process Control System in Anshan Iron and Steel Group Corporation’s Second Power Plant,TM621.6
  7. The Research of Large Wind Turbine Blade Pitch Control Technology,TM315
  8. Distributed Remote Monitor System for Sewer Drainage Based on OPC,TP277
  9. Research and Implementation of Key Technology of Model Running in Business Intelligence,TP274.2
  10. Research and Application of BP Neural Network PID Control Algorithm in Three Tank System,TP273
  11. Research of the Temperature Fuzzy-PID Control Algorithm and Design the Control System of Well Type Resistance Furnace,TP273
  12. Design and Realization of Cleaner Production Assessment System for Synthetic Ammonia Plants,TQ113.2
  13. Integrative Process of Vacuum Brazing and Heat-treating for YG6C Cemented Carbide and 42CrMo Steel,TG454
  14. Label Automation Management System Based on OPC,TP315
  15. Applied research in a vacuum the smelting furnace temperature control system based on variable universe Fuzzy-PID,TF355
  16. The Temperature Control System of Vacuum Sintering Furnace Based on Ant Colony Algorithm and OPC Technology,TP273
  17. Research on Control System Based on Virtual Prototype of the Inverted Pendulum,TP13
  18. Research and design of the electric furnace temperature control system,TP273
  19. DSP-based automatic digital welding multi-axis motion detection and control research,TP273
  20. WC-Co composite powder and alloy development,TB383.3
  21. Research on the Control Strategy of Multi-motors Driving in Conveyor Belt System,TD528.1

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile