Dissertation > Excellent graduate degree dissertation topics show

The Three-dimensional Finite Element Analysis of Transient Temperature Field&Stress Field on Marine Diesel Engine Piston

Author: ChenXiao
Tutor: MaXiuZhen
School: Harbin Engineering University
Course: Power Engineering
Keywords: Piston FEA Transient Temperature Field Stress Field
CLC: U664.121
Type: Master's thesis
Year: 2013
Downloads: 72
Quote: 0
Read: Download Dissertation

Abstract


With the continuous strengthening of the marine diesel engines, the strength and liferequirements of pistons are increasing. Temperature field and stress field of pistons wasanalyzed by use of finite element method to know the distribution of heat load and stress,which will provide the basis for the design, improvement and optimization of pistons. It is ofgreat importance to improve the reliability of pistons. The paper took the piston of620single-cylinder engine as an example and analyzed the steady-state temperature field transienttemperature field and transient stress field under the standard conditions. The details are asfollows:1)A three-dimensional finite element model of the piston was established. Boundaryconditions of steady-state analysis, periodic transient analysis and starting were donerespectively. Comparison between steady-state temperature field with experimental valueswas done to verify the correctness of the steady-state boundary conditions and analyticalmethod. Through the periodic transient thermal analysis, temperature fluctuations on thesurface of the piston were derived, which indicated that the surface contacted with gas was themain temperature fluctuation area. The max temperature fluctuation can be up to20°C andthe wild fluctuation occurred in a distance of2mm from the surface of the piston. The lawthat the change of temperature in the condition of starting is exponential was derived throughthe analysis of temperature field. Extreme temperature fluctuations will generate hugequasi-static thermal stress.2) Simulation of transient thermal stress field was done based on the accurate pistontransient temperature field. Periodical mechanical load was added to the model to get transientmechanical stress and the transient thermal stress and the transient mechanical stress wascoupled together to derive transient coupling stress. The figure of stress concentration and theamplitude of stress and strain was calculated and the course graph of fluctuation with timewas derived. The influence factors of stress at different locations and different time wereanalyzed. The analysis showed that larger thermal stress occurred in the place with greatertemperature gradient and mechanical stress was most greatly influenced by the explosion ofgas. The origin of coupling stress was different in different stages and it was the biggest at themoment of explosion. Transient analysis can better describe the dynamic characteristics of pistons in theworking circulation of diesel engines and it shows the true state of pistons at working stage,which provides a theoretical basis for analysis of the fatigue life of pistons and the reliabilitydesign.

Related Dissertations

  1. Kunming Transient Population Community Present Situation, Question and Countermeasure Preliminary Study,C924.25
  2. Research on Intellectualized Diagnostic Device Applied to Distribution Lines,TM755
  3. Study on Roles of Diacylglycerol Kinase Gene Family in Rice under Xylanase and NaCl Treatments by Transient RNA Interference System,S511
  4. Identification of the Causal Organism of Soybean Bacterial Spots and Two Type Ⅲ Secreted Effectors’s Clone and Functional Analysis,S435.651
  5. Expression Analysis and Localization of OsDMI3 Gene Induced by Abscisic Acid,S511
  6. Stroke Risk Predicti after Transient Ischemic Attack with ABCD2+MES Score,R743.3
  7. Risk Factors for the Development of Transient Hypotony after Sinlicone Oil Removal in Aphakia Eyes,R779.6
  8. Stress Analysis of Long0-Span Lattice Grid Bearing Crane Beam,TU391
  9. Research on Some Dynamic Characteristics of Complex Rotor System,TH113
  10. Study of Micro Electron Mechanical System Performance Based on Temperature Field of Casimir Potential Energy,TH703
  11. Study on the Broaching Performance of Nickel-base Superalloy Based on Finite Element Method,TG132.32
  12. Research of H-beam Steel after Ultra Fast Cooling,TG335.4
  13. Numerical Simulation and Strength Analysis in Plug-in and Jet-stream Hot-wind Furnace,TF578
  14. SOPC Design of Transient Power Quality Disturbances Detecting Based on Nios Ⅱ,TN47
  15. Finite Elements Analysis of Termperature Field during Tire Vulcanization Process,TQ336.1
  16. Thermal Stress Analysis of Blast Furnace Wall,TF573.1
  17. Optimal Design and Parameterized Modelling for the Crawler Mounted Crane Jib,TH213.7
  18. Numerical Simulation Study on Ventilation System of Shenyang Subway,U231.5
  19. Data Compression and De-noising of Power Quality Transient Signals,TM711
  20. Numerical Simulation of Fluid Field and Temperature Field Within the Rotary Vane Dryer,TK173
  21. Thermal Field Analysis for Pot of 320t Torpedo Car with Finite Element Method,TF341.5

CLC: > Transportation > Waterway transport > Marine Engineering > Ship machinery > Ship power plant > Internal combustion engine power plant > Diesel engine
© 2012 www.DissertationTopic.Net  Mobile