Dissertation > Excellent graduate degree dissertation topics show

The Analysis and Research of Leading Phase Operation of Pumped Storage Motor

Author: AiGuanLin
Tutor: GeBaoJun
School: Harbin University of Science and Technology
Course: Motor and electrical
Keywords: pumped storage motor leading phase operation simulation analysis multi machines in leading phase operation
CLC: TV737
Type: Master's thesis
Year: 2013
Downloads: 19
Quote: 0
Read: Download Dissertation

Abstract


It is greatly significant to ensure the stable and safe operation of power grid for pumped storage power station. Due to the development of modern power grid construction, which turns to extra high voltage, large capacity and long distance transmission, so it is easily to cause some problems of points on higher voltage and it also seriously affects the safe and stable operation of electricity transmit-ssion and transformation equipments. So it is very necessary for leading phase operation. It is very considerable for pumped storage motor in leading phase operation, in order to balance the reactive power of system and adjust the voltage of system. The effects of these aspects are very prominent.The related theory analysis of the pumped storage motor is written in the first section of this thesis, which is working in the leading phase operation. And the expressions of electromagnetic power and reactive power are deduced, which pumped storage motor working in leading phase operation. Static angle characteristic is analyzed. The comparison is also used between steady state operation and leading phase operation. The static stability limit of pumped storage motor working in leading phase operation is simulated. Static stability limit, which working condition of pumping water in leading phase operation of pumped storage machine is also researched. Include three kinds of conditions: pumped storage motor directly connected to the infinite power grid, excitation regulator rejected using on pumped storage motor connected to the infinite power grid, excitation regulator used on pumped storage motor connected to infinite power grid. The simulation model of pumped storage motor working in leading phaseoperation is also built in this thesis. The related physical measures are simulated which running from late phase operation to leading phase operation, and the change rule is analyzed. And then the adjustment of the exciting current is increased, including three kinds of conditions: adjusting the exciting current to initial value of60%,70%,80%. The related physical measures are simulated. The depth of leading phase operation is analyzed. A preliminary study for multi machines in leading phase is written in this thesis. The direction of research is also put forward.The difficulties which should faced to is also researched. The method of multi machines stability is discussed. The theory which is of coor-dination between multi machines in leading phase is also analyzed. Finally, the simulation model of multi pumped storage motor working in leading phase operation is also built in this thesis. The related physical measures are simulated. With the same adjustment of the exciting current, the curves between one machine in leading phase and multi machines in leading phase are compared. In order to analyze the differences and the same points.

Related Dissertations

  1. Foundation Monitoring and Analysis in Interval Wenti Road to Wuli River in Shenyang Subway Line 2,U231
  2. FOG inclinometer thermal simulation analysis and optimization,V241.5
  3. Research on Vibration Fatigue of Stiffened Aluminum Alloy Panel,O346.1
  4. Analysis of Transmission Error and Vibration with Modified Spiral Bevel Gear,TH132.41
  5. Feed Mixer Auger Parameter Optimization Study,S817.124
  6. Based on RE / RP technology design and manufacture of artificial knee,R318.1
  7. Analysis on Leading Phase Operation Capacity of 1000MW Hydro-generator,TM312
  8. Matlab Analysis and Simulation of Ferroresonance,TM864
  9. Shotcrete and Anchor Blot Support and Reniforced Slope Toe Technique of Foundation Pit,TU753
  10. Design of Automatic Machine of Lotus Seed’s Spiltting,TS255.35
  11. Hydraulically driven high-frequency performance of reciprocating pump,TE933.3
  12. The Analysis of Influence of Lateral Free Clearance of Axle Box on Heavy Haul Locomotive,U260.11
  13. The Impact of Bilateral AC Electrified Railways on Power System,U223
  14. The Design of Strong Adaptability Small Vibration Type Potato Digger,S225.71
  15. The Design and Research on the 4UM-640 Type Potato Digger,S225.71
  16. High-altitude meteorological data in air quality model of applied research,X131.1
  17. Analysis on the Stability of Leading Phase Operation for Large Synchronous Generator,TM311
  18. Dynamic Response Analysis for An Inland Piled Wharf Structure Against Ship Impact,U656.1
  19. Simulation Study on Matched Performance of Turbo-charger Units in Supercharged Boilers,U664.111
  20. Study on Behavior of Vibration Reduction for the Ladder Track in Urban Rail Transit,U213.2
  21. Fatigue Test and Simulation Analysis for Improved Soil Subgrade under the Ballastless Tracks of High-speed Railway,U213.1

CLC: > Industrial Technology > Hydraulic Engineering > Hydropower utilization of hydropower project > Hydropower station construction and equipment > Operation, management
© 2012 www.DissertationTopic.Net  Mobile