Dissertation > Excellent graduate degree dissertation topics show

Strain Transfer Theory and Sensing Property Research of Strain Sensor

Author: YangJunZuo
Tutor: WangXiaoGuang
School: Central South University
Course: Civil Engineering
Keywords: Strain measurement technology Strain transfer FiberBragg grating sensor Sensing properties Measurementreliability
CLC: TU317
Type: Master's thesis
Year: 2013
Downloads: 62
Quote: 0
Read: Download Dissertation

Abstract


Strain (or stress) is a critical parameter that reflects the state of structure in scientific experimental research or the project health monitoring. Therefore, it is extremely important to select an appropriate and reliable strain sensor to measure accurately. As a front end of experimental research or monitoring system, the stability and reliability of the strain sensor affect the success or failure of the experiment or stability and reliability of the monitoring system directly.In order to analysis the strain transmission characteristics and the sensing properties of sensors with different measurement principles and packing ways, theoretical analysis method, finite element method and experimental method are applied in this article, and then the reliability of strain measurement is qualitative evaluated according to averaged strain transfer ratios and sensing properties of different sensors. The main research contents and results are as follows:1. The strain transfer ratio formula of strain sensor is derived with the analysis on strain transfer of different packing way ones. The influence rule of strain transfer ratio by several major parameters is obtained based on averaged strain transfer ratio formula.2. Finite element analysis models is built through finite analysis soft of ANSYS,which contains three surface type sensors with resistance strain gauge, metal substrate FBG and clamping type FBG and three submerged sensors with steel capillary encapsulating, monolayer embedded encapsulating and tube-encapsulated with end cap. The averaged strain transfer ratio formula and influence rule of strain transfer ratio by each parameter are verified through the finite element models.3. The MTS material testing machine is used on the tensile tests of resistance strain gauge, vibrating string strain gauge, patch type FBG strain sensor, clamping type FBG strain sensor and MTS extensometer. The performance index of linearity, repeatability, hysteresis and fatigue reliability of each sensor is obtained according to the tests.4. An observation is taken into the performances of prestressed RC beam model test and FBG smart strand relaxation test, and linearity of RC resistance strain gauges, submerged and surface type vibrating string strain gauge, submerged FBG strain gauge, mechanical dial strain gauge and FBG smart strand are measured.5. An summary and comparison on the sensing property and service property of the strain sensors are made to qualitative evaluate the advantages and disadvantages and the reliability of measurement.

Related Dissertations

  1. Research in the Physical Features of Adjustable Micro-Strured Fiber Bragg Grating,TN253
  2. Study on Preparation and Optical Gas Sensing Characteristics of Ti-doping Nano Tungsten Oxide Films,O484.41
  3. Study on the Load Spectrum of the High-speed Train Axle and the Fretting Damage,U270.33
  4. Development of an Auto Test System for Humidity Sensors Based on LabVIEW,TP274
  5. Study on the Prediction of Shaft Deformation with Huge Unconsolidated Soil Layer Based on FBG Monitoring,TD325
  6. Preparation and Gas Sensing Properties of Titania Nanotube Arrays,TB383.1
  7. The Study on Preparation and Gas Sensitivity and Catalytic Characteristic of CO Gas Sensitive Materials,O643.3
  8. Study on Gas Sensing and Catalytic Properties Based on SnO2-x Nanocomposites,TB383
  9. The Structure and the Oxygen Sensitivity of TiO2 Oxygen Sensitive Thin Films with Fe Ion Doping,TB383.2
  10. Study on Gas Sensing and Catalytic Properties of Complex Metal Oxide for CH4 and NO2,O643.36
  11. Large ship shafting shaft power test,U664
  12. The TMA-sensitive Performance of Titanium Dioxide Nanocrystal Material,O621
  13. Research on the Modification and Improvement on the Properties of SnO2-based Gas Sensor,TN379
  14. Preparation and Gas-sensitivity of Ultra-fine Active ZnO,O614
  15. Nano- α-Fe_2O_3 with different morphologies and Hybrid Films and gas research,O614
  16. Preparation and thermal properties of the Ni-Al films,O484
  17. Preparation and Sensing Properties of Nanocomposites,TB383.1
  18. Decomposition Characteristics of SF6 under Partial Discharge and Sensitivity of Single-wall Carbon Nanotube to SF6 Decomposition Products,TM855
  19. Preparation and Gas-sensing Properties of Composites Based on Polyaniline,TB381
  20. Study on the Property of the ZnO Films Prepared by Electrostatic-enhanced Ultrasonic Spray Pyrolysis,TB383.2
  21. Study on Preparation and Properties of In-Doped ZnO Thin Films,O484.1

CLC: > Industrial Technology > Building Science > Building structure > Structure theory to calculate > Structural Testing and Inspection
© 2012 www.DissertationTopic.Net  Mobile