Dissertation > Excellent graduate degree dissertation topics show

Optimal Design of Air-condition Used Centrifugal Fan with Multi-blade

Author: LiFang
Tutor: MengXianYi
School: Beijing Construction Engineering College
Course:
Keywords: Multi-blade centrifugal fan Optimization design ANSYS FLUENT
CLC: TU831.4
Type: Master's thesis
Year: 2012
Downloads: 123
Quote: 0
Read: Download Dissertation

Abstract


Multi-blade centrifugal fan has small size, large flow coefficient and high pressurecoefficient. Because of these advantages, it has been widely used in the air conditioning system.In recent years, domestic and foreign researchers has mainly studied geometry and designoptimization of the multi-blade centrifugal fan. And they have done some research aboutnumerical simulation and experimental research of the flow field. This paper is mainly toimprove efficiency while reducing fan noise to achieve fan,s integrated optimization. In thispaper, based on product development of an air conditioning company, from the perspective ofnumerical analysis, using commercial ANSYS and FLUENT software to do some optimizedanalysis about the various structural parameters combination of the multi-blade fan. The resultsshow that achieves the optimization goals.Based on the work of previous studies, an optimization design method with multi-objective,mixed-descrete and continuous variable for multi-blade centrifugal fan of the air-condition ispresented in this paper. The main research contents and results are as follows:1、 Establish the optimal mathematical model of multi-blade centrifugal fan of theair-condition. In the optimization model, the efficiency and noise objective function isestablished. Six discrete and continuous parameters of fan are selected as the design variables,which are blade inlet installation angle, blade outlet installation angle, the width of the volute,volute outlet length, leaf number and speed.2、In the method optimization iteration of fan will be carried out through the program basedon ANSYS-APDL in ANSYS. In the process, the functions of ANSYS achieve a good designproblem with a mix discrete and continuous design variables of the optimization solution.Optimization results show that the efficiency can reach81.5%, noise sound power level canachieve142.64dB. More efficient than before optimizing the efficiency of9.6%.Noise powerlevel lower than before optimization1.59dB.3、A three-dimensional model of the optimized fan is created by using ANSYS. Strengthanalysis and modal analysis for the optimized fan are studied. The results show that theoptimized fan meets the design requirements.4、 Establish physical model of the fan of the before and after optimal based onpre-processing software GAMBIT of FLUENT. The multi-blade centrifugal fan of the before and after optimal,s velocity vector and pressure distribution are compared. The results show that theoptimized fan,s speed and pressures have been improved. The results agree with the previousoptimization. So the research methods used in this paper is feasible for the fan, which can beused in similar fan design.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  3. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  4. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  5. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  6. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  7. Research on a Fire-fighting Shell for Towers,TU892
  8. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  9. Medical Application of a Wireless Communication Platform Based on RFID and GPRS,R319
  10. FEA Analysis for Contact Roller of Sanding Machine,TS64
  11. Optimization of Local Structure and Analysis of Jetting Performance of Main Nozzle in an Air-Jet Loom,TS103.337.1
  12. Study of Optimization Design of Asymmetric and Much Support Floating Raft Isolation System,TB535.1
  13. The Analysis Research and Design of Backstop Roller Based on Virtual Prototype Technology,TH222
  14. The Plastic Sheet Surface Spraying Technology’s Exploit Research,TQ320.67
  15. The Value Simulation of the Filtration Process by Fiber Filter Materials,TB34
  16. The Study of Goaf’s Flow Field and Gas Distribution Rules Base on Fluent,TD712
  17. Research and Manufacture of SZL1000/300 Hydraulic Support Test-Bed,TD355.4
  18. A Ribbon Cage Separated Automatically Technology Research,TH133.3
  19. Research on Optimum Design of Plantary Gear Transmission Mechanism for Cutterbar,TH132.41
  20. Dynamics Simulation and Finite Element Anslysis of the Loader Working Device,TH243
  21. The Structure Analysis and Optimization of Casey Green Laser Emission Dishes Support Bracket,TH743

CLC: > Industrial Technology > Building Science > Housing construction equipment > Air-conditioning, heating, ventilation,and its equipment > Air-conditioning > Air-conditioning machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile