Dissertation > Excellent graduate degree dissertation topics show

Research on Cavitation in Multi-way Valves of Construction Machinery

Author: LiuYang
Tutor: GuanCheng
School: Zhejiang University
Course: Mechanical Design and Theory
Keywords: Multi-way valve FLUENT Flow rate Cavitation Back pressure
CLC: TU60
Type: Master's thesis
Year: 2014
Downloads: 24
Quote: 0
Read: Download Dissertation

Abstract


Multi-way valve is one of the key components of construction machinery. Its quality and performance have a great effect on the whole machinery. At present, study on multi-way valve by CFD method is just the simple and intuitive analysis of the theory. Also, the research on cavitation of multi-way valve at home is not much, and almost experiment or simple analysis of flow field. The thesis is based on multi-way valve of excavator as research object, using CFD software to research the cavitation of multi-way valve. The following research work has been done:Analyze the key factors of cavitation. According to the definition of cavitation number, the direct factors are including pressure and velocity. And the pressure and flow rate are influenced by opening area and flow coefficient. Establish different models in Gambit, simulate in FLUENT, and compute opening area in MATLAB to study the problems. Results show that, opening areas mostly influence pressure and flow rate, however, flow coefficient can be regarded as constant.Establish the three-dimensional models of multi-way valve, according to its principle and basic structure. Choose tetrahedral grid (TGrid) to mesh the models, through theoretical analysis and a large number of numerical simulation. Meanwhile, conduct intensive meshing of valve port, in order to save computing time and improve simulation accuracy.Study on pressure factors of cavitation under the condition of constant flow rate. When the valve is in the small opening position, the throttling effect is better, however, the outlet pressure of cavitation is smaller; when in the fixed position, the outlet pressure is smaller, and the minimum pressure of flow field is smaller. A new method to calculate critical outlet pressure of cavitation is presented by calculating σ, σi and Pout-Pmin.Study on velocity factors of cavitation under the condition of constant outlet pressure and fixed position. By calculating σ,σi, Pin—Pmin, Pin—Pout, find the linear relationship between Pin-Pmin and Pin—Pout. A new method to calculate the critical flow rate of cavitation is presented.

Related Dissertations

  1. Study of the High Temperature Gas-Liquid Two Phase Flow Rate Proportional Conrtol Valve,V233.2
  2. Optimization of Local Structure and Analysis of Jetting Performance of Main Nozzle in an Air-Jet Loom,TS103.337.1
  3. The Value Simulation of the Filtration Process by Fiber Filter Materials,TB34
  4. The Study of Goaf’s Flow Field and Gas Distribution Rules Base on Fluent,TD712
  5. Intensification on Hydrolysis and Esterification Precess by Hydrodynamic Cavitation Technology in Biodiesel Preparation,TE667
  6. Research of a New Integrated Printing, Drying and Sticking Films’ Machine,TS851
  7. Analysis and Control of Flow Field in Coat-hanger Foamed Sheet Die,TQ320.52
  8. Numerical Simulation of Flow and Mass Transfer in Tubular Electrochemical Reactor for Organic Wastewater Treatment,X703
  9. Hydrodynamic Cavitation and Numerical Simulation with CFD,X703
  10. Hongyuan Coal Mine Methane Emission Forecast and Prevention Research,TD712
  11. The Dynamic Mechanism of Breaking Excess Sludge by Ultrasonic,X703
  12. Research on Oil-Mist Flow Field’ Simulating and Lubrication Effects of the Bearing’s Cavity of Upper Back Up Roll,TH117.2
  13. The Analysis of the Weft Insertion Gas Flow of the Sub-Nozzle in Air-Jet Looms,TS104.72
  14. Three-dimensional Stimulation about Outflow Coefficient of the V-Cone Flow Meter,TH814
  15. Three-dimensional Steady Numerical Simulation of Critical Flows and Cavitation Flows in Nuclear Safety Relief Valves,TH134
  16. CFD Simulation and of the Lithium Electrolyzer,TQ150.5
  17. Three other straight in isolator shock train characteristics,V211.48
  18. Study on Adaptability of Sewage Sludge Anaerobic Digestion Disintegrate by Ultrasonication,X703
  19. Numerical Simulation Study on the Process of Electrospinning and Experimental Verification,TQ340.6
  20. Research of Morphing Fin Stabilizer and Its Application in Underwater Vehicles,U664.72
  21. Wake Field Prediction and Optimization of Marine Propeller Considering Cavitation Performance,U664.33

CLC: > Industrial Technology > Building Science > Construction machinery and equipment > General issues
© 2012 www.DissertationTopic.Net  Mobile