Dissertation > Excellent graduate degree dissertation topics show

Research on Pile Integrity Detection Method Based on Distributed Optical Fiber

Author: CaoXueZuo
Tutor: JinWenCheng
School: Huazhong University of Science and Technology
Course: Bridge and Tunnel Engineering
Keywords: Pile Integrity testing Distributed Optical Fiber strain field defect locationindicators defect level indicators
CLC: TU473.16
Type: Master's thesis
Year: 2013
Downloads: 6
Quote: 0
Read: Download Dissertation

Abstract


Pile foundation is the most widely used type of deep foundations. The number ofpiles is growing rapidly in China every year. The bad quality of piles seriouslyendangers the safety of structure and causes huge economic losses. Therefore, piletesting plays a very important role. This paper briefly describes the common method ofpile integrity testing, and then proposes a pile integrity detection method based ondistributed optical fiber.Two formation ways of strain field are describes in Chapter3: by using the modalanalysis method to identify structural strain modal and by using the concrete shrinkagecharacteristics to form the strain field. The strain detection technology based onBOTDR distributed optical fiber can achieve distributed measurement of all points inthe structure，so that the distribution of strain field could be obtained.The defect indicator approach based on the strain field is discussed inChapter4,aswell as the calculation method of the defect position indicators and defect levelsindicators in truss and entity structure, to determine the position and integrity of thedefect.A simply supported beam and a pile model in different conditions are establishedwith ANSYS in Chapters5and Chapters6. The distribution of strain field is obtainedby modal analysis and static analysis. Defect indicators are calculated by using theindicators method. The calculated results are compared with the actual defect to verifythe feasibility of the indicators method.

Related Dissertations

  1. Numerical Simulation Analysis of the Three-Points Welding for Air-Conditioning Compressor,TG44
  2. Formation Mechanism Study and Stability Evaluation of the Complex Geology in New Main Site of Fengjie County,P642
  3. Research on Technical Processing of Slope Slumping,U216.41
  4. Study on Shear Failure of Hadashan Sand Based on Triaxial Test,TU411
  5. Fatigue Life Evaluation of Welded Components in Condition of Complex Stress,O346.2
  6. Based on thermodynamic coupling of aluminum billet dual Kun Casting Process stress - strain numerical simulation analysis,TG335
  7. Designation and Implementation of Fiber Optical Sensor Detecting Algorithm on the DSP Platform,TP368.12
  8. Quantitative Analysis of Data of Low-strain Detection on Piles,TU473.16
  9. The Application Analysis of Optical Fiber Sensing Devices in Deformation Monitoring for Earth Embankment Dams,TP274.4
  10. Seasonally frozen ground temperature field and high embankment slope stability analysis,U213.1
  11. Study on Reliability of Distributed Temperature Sensing System,TP212.11
  12. Optical signal processing method of long-distance B-OTDA and Φ-OTDR sensor system,TN911.7
  13. The Effects of Sample-preparing Methods on Static Tri-axial Test Results of Fine Sands on Digital Image Measuring System,TU411.7
  14. Research on Affecting Factors of Pipeline Bending Deformation Monitoring Based on Distributed Optical Fiber Sensing Technology,TN253
  15. Design of Perimeter Security System Based on Distributed Fiber Optical Sensor,TP212.14
  16. Study on Regional Vibration Detection Based on Distributed Optical Fiber,TP274.4
  17. The Research on Monitoring Technique of Steel Corrosion Using Fiber Optic Sensor,TU375
  18. Study on Locating Technology of Distributed Optic-fiber Intrusion Early Warning System Applying Sub-loop Fiber,TP274
  19. The Error Correction and Data Processing of Digital Image Processing Method Based on the Tri-axial Test,TP391.41
  20. Manufacture of the Device for Welding with Trailing Rolling and Pressing and Research of Control of Welding Distortion,TG375
  21. Research on Computer Processing of Holograph of Residual Stress-Strain Field in Welding,TP391.4

CLC: > Industrial Technology > Building Science > Soil mechanics,foundation engineering > Foundation > Pile foundation and deep foundation > Pile > Pile test
© 2012 www.DissertationTopic.Net  Mobile