Dissertation > Excellent graduate degree dissertation topics show

Hydrodynamic Design and Strength Calculation of a Pressurized Water Reactor Nuclear Third-class SEC Pump

Author: JiaMing
Tutor: LiuYan
School: Dalian University of Technology
Course: Power Engineering
Keywords: Nuclear grade pumps Performance parameters Hydraulic design Structure design Strength calculation
CLC: TL353.12
Type: Master's thesis
Year: 2013
Downloads: 24
Quote: 0
Read: Download Dissertation


With improvement of domestic and international industrial development level and demand of human living on energy constantly increasing, all over the world, chemical and industrial raw materials mainly made of oil, coal and natural gas are dying out. In view of existing renewable energy, development of water resource is gradually difficult. Solar and wind power can’t supplement as large scale energy. Due to limit of meteorological and geographic conditions, potential of development is also limited. As secure, clean and efficient power, development of nuclear power is getting more and more focus. Development of nuclear power has become an important method to solve the energy problem today. Therefore, demand and development of nuclear class pumps will also get more space in the future.Vigorously developing nuclear power is a major national strategic need and meaningful to adjust energy structure, reduce pollution emissions and achieve coordinative development of economy and environment.In the nuclear power plant, there are a lot of nuclear power equipments. These nuclear class equipments require both high pressure, high temperature, radiation-resistant, corrosion-resistant, earthquake-resistant, and vibration, shock and load functions. Once the nuclear equipment fails, disastrous accidents may happen. To prevent a catastrophic accident, nuclear power equipment must be highly reliable and very safe.Because nuclear power equipment has particularity of the required high security level, high manufacturing accuracy and design difficulty, the equipments have been mostly monopolized by foreign advanced enterprises for a long time. In this background, in order to completely break the foreign monopoly, promote development of our nuclear power industry and equipment industry, and to guard national economy not controlled by other countries, localization of nuclear power equipment must be expedited.With promotion of nuclear pump localization, standardization of nuclear class pump design is especially important. At present, our nuclear pump design is still in its initial stage. Therefore, this article takes design process of Nuclear Class III Main Feed Water Pumps for Essential Service for an example. Calculation, verification and material selection provide a reference for design of nuclear pump. This article demonstrates design process of Nuclear Class III Pump according to the purchase contract and agreement signed between some company and our company, and relative stipulations in the technical specification. Main elements are as follows:1. Clear the pump performance parameters, working conditions, marine water quality, Ocean hydrology, power supply, interchangeable known conditions, to prepare for the design and calculation;2. PWR nuclear level important auxiliary hydraulic design of water pump;3. PWR nuclear level structure of important auxiliary water pump design;4. PWR nuclear level important strength of auxiliary water pump parts and the calculation of rotor critical speed;5. Strength calculation of the pressure parts.

Related Dissertations

  1. Research on the Key Factors of Organization Structure Design for EPC/DB Contracting Enterprise,TU72
  2. Research on Technique of Pipe Free for Workover Rig,TE935
  3. The Design Theory and Methods of Camping Housing Structure,TU318
  4. Study on the Type Test-bed Mechanical Structure Design and Analysis,U467.5
  5. The Research on the Structure Design System for Fine Blanking Dies Based on Solid Works,TG385
  6. Effects of by Sulfur Dioxide Low-temperature Corrosion to Boiler Safety Working,TK228
  7. Parametric Modeling and Design Analysis of Centrifugal Fan,TH442
  8. WEB-based non-ferrous metallurgy thermodynamic database system research and design,TF801.1
  9. Research on Structures of the Experimental Prototype of Roadheader Robot,TD421.5
  10. Study on General Structures of the Submarine Plough,TE973
  11. Experiment Study on the Single-stage Downhole Hydrocyclone Separator,TE937
  12. Basic Theoretical Analysis and Research of Fatigue Damage on Semi-Rigid Pavement,U416.2
  13. Structure Design and Research of Comprehensive Test-bed for Walk-aided Robot,TP242
  14. Working Mechanism Analysis and Experimental Research of a New Type Blue Algae Removal Machine,X524
  15. The Techniques and Database Management System of PBA (Producing-Based Analysis) of Set-Up Carton,TS767
  16. Design and Study of Blowout Preventer Used for Minor Overhaul,TE921.5
  17. The Structure Analysis and Test of the New Metro Bogie Frame,U270.33
  18. Analysis and Study of the Correlation of the Internet Primary Performance Parameters,TP393.06
  19. Research on the Design of Organization Structure of Real Estate Enterprise in Chongqing,F293.3
  20. Research of Simulation and Design on Compress Unit of the Downhole Helico-Axial Multiphase Pump,TE933.3
  21. SPORT satellite structure and layout of the neutron star and dynamics simulation analysis,V423

CLC: > Industrial Technology > Nuclear technology > Engineering of Nuclear Reactors > Reactor components and the design, manufacture > Circuit and its equipment > Thermal equipment and cooling system > Pumps and fans
© 2012 www.DissertationTopic.Net  Mobile