Dissertation > Excellent graduate degree dissertation topics show

Research of Position Sensorless for Switched Reluctance Motor

Author: JingKaiKai
Tutor: WangMianHua
School: Xi'an University of Science and Technology
Course: Power Electronics and Power Drives
Keywords: Switched Reluctanc Motor sliding model observer sensorless detection Direct Torque Control
CLC: TM352
Type: Master's thesis
Year: 2013
Downloads: 59
Quote: 0
Read: Download Dissertation

Abstract


The Swithed Reluctance Motor(SRM) has been wiedly applied in many fields because ofthe advantages of simple structure, flexible control strategy and low cost.Switched ReluctanceDrive System(SRD) is a new drive system with high potential after the application of AC orDC motor drive system.The running of SRM is controlled under exciding different phasewindings by appropriate sequence,thus the position detection is a very important part of thedrive system.But the conditional position-sensor causes the SRM performance to the certainlimitation,which rises the cost and adds the complexity of SRD.As a result,the sensorless forcontrol of SRM has become one major direction in the study of SRD.The thesis analyzes the structure and operatiion principle of SRM,using the linearinductance model of SRM, a simulation model of SRD was built up.And based on the directtorque control of motor, reduced torque ripple in SRD.Based on state observer method,thesliding model observer(SMO) was prosed for sensorless detection,which only needs themeasurement of phase voltage and current to estimate motor position.Based on designing ofthe control system with sliding model observer,simulation results demonstrate theapplicability and robustress.A core controller based on TMS320F2812DSP was introduced inthis paper, and the designed SRD circuit includs the main circuit control module、powerconverter、voltage detection module、current detection module and speed detection module.This paper also describes the design of the whole system software. Control systemsoftware worked in the CCS3.3environment, used C language to compile the current chopperprocedures, direct torque control procedures and other related subprogram,it has realized themotor current chopper start and has laid the foundation for further research.

Related Dissertations

  1. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  2. Research on Variable-Frequency Adjustable-Speed System for Mining Battery Locomotive,TM921.51
  3. Torque Control of Brushless DC motor directly based dsPIC30F4011,TM33
  4. Research and Simulation on Synchronous Traction System of High-Speed Train,U260.13
  5. VSCF doubly-fed wind turbine maximum power point tracking control,TM614
  6. Appliances phase permanent magnet motor control system,TM341
  7. Induction Motor Direct Torque Control System Design and Research,TM343
  8. Study on Dual- PWM Variable Frequency Adjustable Speed System,TM921.51
  9. The Research on Direct Torque Control System of Brushless Doubly-Fed Machine Based on DSP,TM34
  10. Predictive Direct Torque Control for Brushless Doubly-fed Machine,TM34
  11. Research on Adjusting-Speed System of Three-Phase AC Induction Motor Based on ARM,TM343.2
  12. The Simulation Reserch of Direct Torque Control for Induction Motor System Based on the Three-level Inverter,TM343
  13. Study of PID Optimization Based on Chaos for Mine Hoisting DTC System,TD633
  14. Research of Asynchronous Motor Direct Torque Control System Based on Single Neuron Control,TM343
  15. Speed ??Sensorless Direct Torque Control System Design and Research,TM302
  16. The Research on Indirect Torque Control System of Brushless Doubly-Fed Machine,TM301.2
  17. Research on Novel Direct Torque Control of Induction Motor,TM343
  18. Wind power generation system based on double-fed induction motor,TM614
  19. The Modeling and Research of Multiphase Induction Machine with Structural Unbalance,TM346
  20. Simulation and Realization on Control Strategies of Permanent Magnet Synchronous Machines in Direct Drive System,TM341
  21. Research on Low Speed Performance of Permanent Magnet Synchronous Machine Direct Torque Control,TM341

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Reluctance motor
© 2012 www.DissertationTopic.Net  Mobile