Dissertation > Excellent graduate degree dissertation topics show

The Study on Optimization Design of Vibration Energy Harvester

Author: ZengYiZhi
Tutor: TaoHongYan
School: Chongqing University of Technology
Course: Mechanical and Electronic Engineering
Keywords: energy harvesting vibration energy piezoelectric structure non-axisymmetric finite element analysis
CLC: TM619
Type: Master's thesis
Year: 2013
Downloads: 126
Quote: 0
Read: Download Dissertation

Abstract


With the development of Micro-electromechanical technology, the energy consumptionof Micro-equipment has become lower. Because the advantages of low power consumptionMicro-electromechanical System (MEMS), its application becomes more widely.Nowadays, more and more MEMS’s applications need to work in a long term withoutman’s management. The equipment’s long term power supply becomes a key issue of itsapplication.Environment contains various forms of energy. Energy harvester is equipment that canharvest surrounding energy and transform into electric energy. Let energy harvester tosupply the electric energy that MEMS needs is a probable way to solve the problem. Afteranalysis the different forms of energy and different ways to convert energy, Author findvibration energy is widely exist in the environment, and it is probable to make use of thevibration energy harvester to supply power. Do research of those main methods to harvestvibration energy, have a conclusion that the method that use piezoelectric material totransform vibration energy is more feasible than the other two ways.In this dissertation, author has a detailed study of the piezoelectric effect andpiezoelectric type energy scavenger. Most vibration energy harvesters are working inresonant mode. The vibration frequency in surrounding is low, so it is need to lower theinherent frequency of energy harvester. Optimization in piezoelectric beam’s length andmass in the end to lower the natural frequency has faced a bottleneck. The length of beamand weight of mass can not increase without limit. In order to find another way to reducethe inherent frequency, design a non-axisymmetrical composite piezoelectric beam. Usefinite element analysis software to comparative analysis non-axisymmetrical and basicrectangular composite piezoelectric beam in the same dimensions. And then do research inthe size of non-axisymmetrical piezoelectric beam with its performance effect. Finally,have experiments of the two kinds of beams. The result show non-axisymmetrical beamhas better performance.The study on non-axisymmetrical composite piezoelectric beam has certaininnovation and research value.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  5. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  6. Design of Testing Equipment for Electronic Products,TN06
  7. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  8. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353
  9. Virtual Prototype Realizing and Performance Research of Longitudinal Roadheader,TD421.5
  10. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  11. The Structure Design and Finite Element Analysis for the Light Hydraulic Support with Auxiliary Beam,TD355.4
  12. Analysis on Static-dynamic and Fatigue Characteristics of Metallurgical Overhead Traveling Crane,TH215
  13. Study on Geometric Characteristics and Fininte Element Anslysis of Hositing Ropes,TD532
  14. Strength Finite Element Analysis on Crankshaft Based on ANSYS,TK423
  15. Research on the Development of the Digital Mock-up and Functional Simulation of the Entire Cross Section Mechanical Boring Machine,TD421.5
  16. Research on the Light-Weight Optimization of Disc Brake Structure Based on CAD/CAE Technique,U463.512
  17. Research on Vibration Energy Harvester Based on Piezoelectric Cantilever,TM919
  18. Research on Biomechanics of Artificial Hip-Host Bone System,R687.3
  19. Residual Strength Analysis of Structures with Multiple Site Damage Based on Crack Tip Opening Angel Criterion,O346.1
  20. Research on UG’ Automotive Sheet Metal Design and Finite Element Analysis,U468.2
  21. Study of Key Techniques on Manipulator of RFID Packaging Machine,TP241

CLC: > Industrial Technology > Electrotechnical > Power generation, power plants > Variety of power generation > Other energy generation
© 2012 www.DissertationTopic.Net  Mobile