Dissertation > Excellent graduate degree dissertation topics show

The Analysis and Processing of Frequency AC Mixed with DC System Maloperation

Author: QiuJianBin
Tutor: KangLongYun
School: South China University of Technology
Course: Electrical Engineering
Keywords: Frequency AC DC system maloperation analysis relay protection
CLC: TM77
Type: Master's thesis
Year: 2013
Downloads: 14
Quote: 0
Read: Download Dissertation

Abstract


With the progress of the times and the rapid development of China’s economic strength,people on the electricity market requirements are growing more and more stringent.The DCsystem in power system protection and control is not only used as control power for circuitbreakers and disconnectors in power plants,but also used as power supply and action powerfor computer protection. Therefore, the domestic requirements for DC system operation havebeen clearly stipulated at home and abroad. A dedicated set of DC system bus insulationmonitoring device must be ensured,and the DC system is not allowed to be grounded or to beconnected with other grounded nature outside power supply in operation. How to ensure thestable operation of the DC system is equivalent to how to improve the operational reliabilityof relay protection devices.This paper analyzes the case that two transformers simultaneously tripped caused byrelay equipment maloperation.The maloperation was caused by false wiring that industrialfrequency AC was wired into DC system in the construction process. Since the failures hasnot be detailed recorded by wave-recording device, the following work must be done.Atfirst,the fault must be searched in the field.Secondly, the act of recorder and the record data inDC insulation monitoring unit must been analyzed. PSCAD software aslo be used to simulatean accident transient processes for the analysis process provides a more intuitive analysis relyon. At last, the effects on protection and control devices of wiring the frequency AC into DCsystem for computer must be analyzed and evaluated. In this paper,during developingappropriate corrective action,reasons from design,construction,drawings,equipmentselection,engineering supervision and other aspects are analyzed,and correspondingpreventive measures are proposed.

Related Dissertations

  1. Research on Influence of Wind Power Integration and Countermeasure,TM614
  2. DC system based on wavelet transform line detection remaining battery capacity,TM732
  3. The Distributed Power Distribution Network of Jiangmen Running Influence Key Problems Research,TM732
  4. The Research on the Practical Application of Fiber-optical Protection for Transmission Lines,TM773
  5. Programmable Logic Controller software design and implementation,TP273
  6. Relay setting value management system,TM77
  7. Research and Development of Microcomputer-based Relay Protection Test Device,TM774
  8. The Research on Algorithm of Wide Area Protection and Local Substation Coordination Strategy,TM771
  9. Single-phase current relay protection tester Development,TM774
  10. The Technology Research of 110/20kV Transformer Substation,TM715
  11. Studies of DC System Grounding Fault,TM862
  12. Research of Condition-based Maintenance and Condition Assessment System of Relay Protection,TM774
  13. Study and Application of Fault Information Networking Technology in Grid,TM734
  14. Research and Development on Simulation Training System of Relay Protection for the Hydropower,TV734
  15. The Research of Switching Power Amplifier for Microprocessor Relay Protection Testing System,TM774
  16. Intelligent Substation Relay Protection Debugging Research and Application,TM77
  17. Cascaded Multilevel AC converter and its application,TM46
  18. Research on Expert System of 500kV/220kV Relay Protections Inspection Standardized Operations,TM76
  19. The Research and Application of Relay Protection and Fault Information Subsystem,TM77
  20. Issues related to research and application of substation automation system,TM63
  21. Study on Predictive Diagnostic Maintenance and Outlet Circuit Detection of Relay Protection,TM774

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system protection
© 2012 www.DissertationTopic.Net  Mobile