Dissertation > Excellent graduate degree dissertation topics show

The Design of the Power Lithium-ion Battery Charger

Author: ZhaoJinLong
Tutor: YanJingBin
School: Harbin University of Science and Technology
Course: Power Electronics and Power Drives
Keywords: Lithium-ion Battery Charger LTC3891 LTC4000
CLC: TM912
Type: Master's thesis
Year: 2014
Downloads: 18
Quote: 0
Read: Download Dissertation

Abstract


Promoting the development of green energy and cycle energy has become anurgent subject to be solved in the international community. Lithium-ion batterybecomes the development direction of the new generation of the power supplybecause of its high density, high working voltage, no pollution, safely andquickly charging. However, Lithium-ion battery is different from otherrechargeable batteries. Lithium-ion battery has its special characteristics ofcharging and discharging which need to design the special charger. Due to thedesigns of the charger in the market are mostly just for their single user andobject, so the purpose of this paper is to design a high-performance charger thatcharging current is adjustable.This paper is based on the electrochemical reaction mechanism of lithium-ion battery charging, charging and discharging characteristics, the commonlyused charging methods. The way that constant current charging and constantvoltage charging is choosed. The overall design strategy is identified. Thecharger is divided into two parts, hardware circuit system and communicationsystem. The Linear Technology’s DC/DC controller chip LTC3891and powermanagement chip LTC4000are selected in the hardware circuit system, andcorresponding peripheral circuits are also built. The paper mainly introduces thebasic principle of the hardware circuit and the parameters calculation method ofthe peripheral circuit components. Combining LTC4000’s features, implementthe charging current is adjustable, and thus put forward a design scheme that donot rely on single chip microcomputer to control PWM waveform. Thecommunication system is designed for improving charger’s intelligent degree.The AD sampling circuit, DA converter circuit and CAN communication circuitare all designed, and corresponding program flow are also designed. The dedicated hardware simulation tools LTspice IV is used in this paper.The simulation focuses on two cases that the battery initial voltage is lower thanthe low battery threshold voltage and the battery initial voltage is higher than thelow battery threshold voltage. The simulation result consistent with thetheoretical analysis, show that the charger has the ability to intelligently charge,and thus proving the correctness and feasibility of this research.

Related Dissertations

  1. Preparation and Properties of Silicon Carbon Anode for Lithium Ion Battery,TM912.9
  2. Research and Design of DC Electricity Metering Equipment in Off-board Charger,U463.6
  3. Preparation of Silicon-based Alloy Anode Material Andelectrochemical Properties,TM912
  4. Research of Graphitized Needle Coke Coated by Phenolic Resin Pyrolytic Carbon as Anode Material for Lithium Ion Battery,TM912
  5. Preparation and Modification of Lithium Ion Battery LiNi0.8Co0.05O2 Cathode,TM912
  6. Effect of Water Binder on the Electrochemical Performance of Graphite,TM912
  7. Preparation and Performance Research of Lithium Ion Battery Anode Material Li4Ti5O12,TM912
  8. Synthesis and Properties of Spinel Limn2 O4 as Cathode Material,TM912
  9. Study lithium titanate prepared from ilmenite,TM912
  10. Synthesis and Modification of Cathode Materials LiFePO4 and Li2FeSiO4 for Lithium Ion Battery,TM912
  11. Lithium-Ion Battery Equalization System Simulation Study on Bidirectional Flyback DC-DC Converter,U463.633
  12. Supercritical Method Preparation for Lithium Iron Phosphate Nanometer Material and Its Carbon-coating Research,TM912
  13. Research on Functional Electrolytes for Lithium Ion Battery,TM912
  14. Synthesis and Modification of Nano LiFePO4 as Cathode Materials,TM912
  15. Study on Synthesis and Modified of LiFePO4 as Cathode Materials,TM912
  16. Preparation and Research Electrochemical Properties of LiFePO4 for Cathode Material of Lithium-ion Batteries,TM912
  17. Porous electrode material of vanadium pentoxide Synthesis, Characterization and Properties,O614.511
  18. Graphite anode low temperature performance influencing factors and improving research,TM912
  19. New lithium -ion battery anode material Li 4 Ti 5 O 12 Preparation and Modification,TM912
  20. Anomaly Monitoring Method for Key Components of Satellite Based on Multivariate State Estimation Techniques,V556
  21. Lithium battery cathode material of lithium vanadium phosphate synthesis and electrochemical properties of,TM912

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Battery
© 2012 www.DissertationTopic.Net  Mobile