Dissertation > Excellent graduate degree dissertation topics show

Study of DSP Controled Battery Charging and Discharging System

Author: SunYue
Tutor: CheYanBo
School: Tianjin University
Course: Power Electronics and Power Drives
Keywords: Lead-acid battery charging and discharging conversion DSP BMS
CLC: TM912
Type: Master's thesis
Year: 2012
Downloads: 17
Quote: 0
Read: Download Dissertation

Abstract


Based on the request of energy saving and environmental protection, the researchand improvement of the electric car have drawn more and more attention of thecountries all over the world. And as one of the key technologies of electric carresearch, high performance battery charging device and the combination of intelligentnetwork management and electric cars also get the attention of various countries’scientific research institution and scientific research personnel. In the electric vehiclecharging station which is combined with intelligent power system, the solar energyand wind power is the more extensive application of clean energy, but theirschedulability is not high and randomness is stronger. Therefore we need the device tostore power to let the battery charging station use the storge power to supply theelectric vehicle in the absence of power grid and photovoltaic power supply. And alsostore energy generated by photovoltaic in the absence of vehicle charging.Lead acid battery is the currently widely used storage power device, and atpresent it has the features of low cost, large power, and simple manufacturing process.With its application fields gradually expand, maintenance is more and more valued,especially the charge and discharge balance control highly impact the battery life. Ifthe charging technology can not adapt to the special requirements of lead-acid batteryor the series battery charging and discharging is disequilibrium, it can make theaccumulator hard to meet the prescribed cycle life. Battery long-term discharge iseasy to cause over-discharge which can lead to cell damage. Therefore, appropriatebattery charging and discharging circuit and battery management system should bedesigned.This topic is part of the electric vehicle charging the system based on intelligentgrid. This article develops battery charging and discharging DC-DC convertor deviceand battery management system suitable for storage part of this system. According tothe characteristics of the lead-acid battery, combined with the electric vehicle chargingand discharging characteristics, the bidirectional conversion device is designed, whichcan decrease the voltage from high dc bus to charge battery, and also can boost thebattery voltage to supply the dc bus; At the same time, design a battery managementsystem suitable for lead-acid battery, which can realize the battery charging and discharging equilibrium, battery capacity detection and other functions to achieve thepurpose of extend battery life.

Related Dissertations

  1. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  2. Research on Synchronous Motor Excitation Control System,TM341
  3. The AES Algorithm and Its Implementation in DSP,TN918.1
  4. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  5. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  6. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  7. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  8. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  9. Development of Vxibus Common Interface Module Based on DSP,TP274
  10. Laser alignment system posture measuring device developed,TN24
  11. The Design and Implementation of the Control System for PMSM Based on DSP,TM341
  12. Research on DSP-based Auto-focusing Systems,TP391.41
  13. The Discrimination of Rice Weeds Based on DSP,TP391.41
  14. The Research of Large Wind Turbine Blade Pitch Control Technology,TM315
  15. The Design and Implementation of MCR Controller Based on Digital Control,TM47
  16. Forecast of Gas and the Realization of the Early Warning Devices under the Mine,TD712
  17. Design and Implementation of Hydraulic Injection Molding Machine Servo-pump Controller Based on DSP,TQ320.52
  18. Research on Integrated Digital Equipment of Pulsed Tandem MIG Arc-Welding Inverter Power Source Based on DSP,TG444
  19. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8
  20. Study on Application of Solar Energy Street Lamp Intelligent Controller,TM923.5
  21. Based on FPGA and DSP Text Image Acquisition and Locate Studies,TP391.41

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Battery
© 2012 www.DissertationTopic.Net  Mobile