Dissertation > Excellent graduate degree dissertation topics show

Merging Unit Software Design and Implementation in Digital Substation

Author: LiLing
Tutor: ChenDeMing
School: Southwest Jiaotong University
Course: Proceedings of the
Keywords: digital traction substation merging unit electrical transducers FPGA
CLC: TM922.4
Type: Master's thesis
Year: 2013
Downloads: 9
Quote: 0
Read: Download Dissertation

Abstract


Merging Unit(MU) which is the core of the digital substation is an important interface between primary equipment and secondary equipment in substation. With the development and promotion of digital substation technology, traction substation with integrated automation system will inevitably transit to digital traction substation. In this paper, MU of traction substation is studied and designed in detail which is of great importance to the realization of digital traction substation.In this paper, the functions of MU are analyzed according to IEC60044-8and IEC61850-9-2, then combined with the actual needs of the high-speed railway traction substation, the configuration scheme of MU is given. On this basis, the overall realization scheme of traction substation MU is given, which is characterized by using field programmable gate array FPGA as the hardware core of MU, making full use of its fast processing speed and short development cycle characteristics. In the overall design of MU, the FPGA program is divided into data acquisition module, data processing module and data transmission module. The numerical integration, re-sampling and data synchronization of data processing module are analyzed in detail, the algorithms of which are optimized according to the characteristics of the FPGA. In this paper, functions of data acquisition, data processing, data transmission module are analyzed, and the detailed design method and realization procedures of each module is given. Each module of MU is simulated and tested using Xilinx ISE14.1software, and the test results show that all the modules of MU designed in this paper can perform their functions well in accordance with the requirements of IEC61850substation automation communication standards. A feasible realization scheme for digital traction substation MU is provided in this paper.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  3. Development of LXI Arbitrary Waveform Generator,TM935
  4. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  5. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  6. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  7. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  8. Development of Serial Bus Analyzer Based on Nios,TP274
  9. Study on a New Method for Digital Transformer Protection Based on Wavelet Neural Network and FPGA,TM407
  10. Research PXI bus -based projectile speed module,TJ410.6
  11. The Designing of HD Vehicle Detection System Based on Fpga,TP391.41
  12. Design and Implementation Method of 3D Camera System Base on FPGA,TP391.41
  13. The Research of Small Size Soccer Robot Control System Based on FPGA,TP242
  14. Design of A Multi-axis Cnc System Based on FPGA and NIOS Ⅱ,TG659
  15. A Merging Unit Design of Optical Electronic Transducer Based on IEC61850-9-1 Standard,TM45
  16. Design of Pulse Test Based on EDA Technique,TN02
  17. Research and Design of Digital Control Machine System Interpolation Algorithm,TG659
  18. Bridge designed for right-angle signal generator,TM935.2
  19. FPGA-based motion control system design,TM341
  20. Application of FPGA in Low SVG,TN791
  21. Design of General LCD Detection System,TN873.93

CLC: > Industrial Technology > Electrotechnical > Electrification,electrical energy application > Electric traction > Traction substation
© 2012 www.DissertationTopic.Net  Mobile