Dissertation > Excellent graduate degree dissertation topics show

Research on the Lager Pulsed Current Measurement Based on the Low-Frequency Compensation

Author: ZhangYu
Tutor: ZhangJun
School: Nanjing University of Technology and Engineering
Course: Armament Launch Theory and Technology
Keywords: Pulsed power technology Rogowski coil Hall current sensor Signalanalysis
CLC: TM933.1
Type: Master's thesis
Year: 2014
Downloads: 13
Quote: 0
Read: Download Dissertation

Abstract


This dissertation is based on the pulsed power technology which originated in1930s, is an integrated subject involving multiple technologies. In recent years, with the rapid development of the electromagnetic launch technology, pulsed power technology got more and more attention. In order to lucubrate the pulsed power technology, make it could been applied in national defence,civil and other fields, it must be able to accurately measure the pulsed current. The major work is as follows:First, analyses the working process of the PFN and establish the state equation of the discharge circuit. Using MATLAB to get the waveform of pulsed current. Doing Fourier transform, we can find that the pulsed current has many characteristics, such as high amplitude, short rising time.Research the measurement technology based on the characteristics of the pulsed current. Rogowski coil current sensor has become the ideal measurement of pulsed current, because of its advantages, such as Wide bandwidth, without magnetic saturation, simple structure and so on. This paper expounds the principle of Rogowski coil, analyses the effects of structure parameters on the performance of the measurement system. Design the integral circuit to broaden the bandwidth. According to the design to make the Rogowski coil current sencor.Second, looking for the method to compensate the disadvantage of Rogowski coil. Analyzing and comparing several commonly used current sensor. Select Hall current sensor because it can measure DC and high-frequency current.Finally, compacting the simulation and experimental results. Using Hall current sensor measured waveform compensate the waveform measured by Rogowski coil.

Related Dissertations

  1. Numerical Analysis of Pre-charge and Turn-on Process and Voltage Measurement of RSD,TN323.6
  2. Rogowski coil electronic transformer design digital integrator,TP321.2
  3. Research on Data Acquisition System of Digital Substation and the Protection Theory for Transformer Based on It,TM76;TM63
  4. Clamp Rogowski Coil Electronic Current Transformer Based on Printed Circuit Board,TM452
  5. Research on Rogowski Coil Small Current Transformer,TM452
  6. Research on Electronic Current Transformer Based on Rogowski Coil,TM452
  7. Research on Cable Anti-theft and Alarm System Based on Sensor Fuse Technology,TM73
  8. Design of Detection Device of Charge-Discharge Performance of Solar Photovoltaic Lighting System,TM923.4
  9. Hall Current Transducer and the Design of Automatic Debugging Testing System,TP212
  10. The Simulation About the Characteristic of Rsd and Its Structural Optimization,TN323.6
  11. Hall current sensor accuracy test uncertainty analysis,TP212
  12. Research and Design of Overload Limiter without Load Sensor,TH715.1
  13. Research and Design of Data-sampling System in Electronic Transformer,TM45
  14. Study of Improving the Measurement Accuracy of Hall Current Sensor with Data Fusion Technology,TP212
  15. Research on the Measurement and Control System Using on 15kV Nanosecond Pulse Generator,TN782
  16. The Research and Development of High-Voltage Electric Energy Measuring Device,TM933.4
  17. Travelling Wave Fault Location Technology Base on Electronic Instrument Transformer in Smart Substation,TM755
  18. Active Electronic Transformer Based on a New Program of Research and Design of Energy Supply,TM45
  19. Research on Adaptive Electronic Current Transformer Based on Rogowski Coil,TM452
  20. Study on PD Detection and Pattern Recognition for Power Cables,TM85
  21. The Research of Electronic Current Transducer and Its Interface Technique,TM452

CLC: > Industrial Technology > Electrotechnical > Electrical measurement techniques and instruments > Power the number of measurements and instrumentation > Current measurement and instrumentation
© 2012 www.DissertationTopic.Net  Mobile