Dissertation > Excellent graduate degree dissertation topics show

Research on Design of Biomimetic Gradient Biodegradable Bone Tissue Engineering Materials

Author: PingRuiZuo
Tutor: WeiQiang
School: Tianjin University
Course: Materials Science
Keywords: Biomimetic bone Pure magnesium HA β–TCP Microwavesintering Laser surface-patterned
CLC: R318.08
Type: Master's thesis
Year: 2012
Downloads: 2
Quote: 0
Read: Download Dissertation

Abstract


Repairment of bone defect is one of difficulties in clinic. Many researchers havetried to solve the problem by fabricating more kinds of biomimetic materials. But theyare only devoted to researching on cartilage tissue, and few researches on hard tissuecan be found. Therefore, the this project is to study a biomimetic bone materials withgradient structure and biodegradability, the purpose is to prepare a bone repairmaterial with the structure and mechanical properties as autogenous bone.This paper was mainly done two aspect works as follows:(1) Hydroxyapatite(HA) was selected as raw materials of biomimetic cancellous bone. Microwavesintering was used to prepare biomimetic cancellous bone which had the similarcomposition and structure to the autologous bone, and its biological activity wastested.(2) Pure magnesium (Mg) was selected as raw materials of biomimetic corticalbone. Firstly, both of biodegradability and bio-osteoinductivity of pure magnesiumwere tested in vitro and in vivo. Secondly, laser surface-patterned was used toenhance osteoinductive of surface of simple. Finally, mechanical properties of porousMg plate were simulated by ANSYS software.The results can be listed as follows:(1) When sintering power and sintering timeof microwave sintering are600W and15min, the sample was composed of β-TCPand HA.(2) After static immersing in simulated body fluid (SBF) for18d, bone-likeapatite was formed on the surface and section of sample after sintering. So the samplehas good bio-osteoinductivity and three-dimensional through-hole structure.(3) Invitro, after immersing in SBF, the degradable rate of pure Mg gradually slow down,and eventually reach to a balance value. After immersing for20h, corrosion productslike apatite were formed on the surface.(4) In vivo, the result shown that pure Mg hasa good biodegradability. However, the animals have discomfort phenomenon becauseof the excessive amount of hydrogen generating and poor osteoinductivity.(5) Aperiodic V-shaped groove structure was produced on the surface of pure Mg by lasersurface-patterned. This structure is conducive to the deposition of calcium andphosphorus ions, and it played a role in improving the surface bioactivity.(6) Theresult of tensile test proved the reliability of simulation of the mechanical propertiesof pure magnesium by ANSYS software. Through simulate the mechanical properties of the porous plate, it meet the need of mechanical properties of human bone when thenumber of holes is60, and the porosity is15.072%.

Related Dissertations

  1. Molecular Epidemiologic Characteristics of HA Gene of Influenza Viruses in Dalian During 2005～2009,S852.65
  2. HaWan Craft Optimization and the Development of its Dishes,TS254.4
  3. Preparation of Zirconia-based Dental Bioceramics and Measurement of Its Mechanical Performance,TQ174.75
  4. Distribution of Hyaluronic Acid in Lung Xenograft of Nude Mice and the Trace-study of Ha Specific Binding Protein (p-CLP),R734.2
  5. Study on the Effect of Mg-Re Interalloy on the Flammability and Microstructure of Industrial Pure Magnesium,TG146.22
  6. Recombinant Human Bone Morphogenetic Protein -2/20% Β-Trical- Cium Phosphate /Poly-Dl-Lactic Acid Com- Posite Material for Lumbar Posterolateral Fusion Experimental Study,R318.08
  7. Effect of Artificial Bone with Different Size on Repairing Lacunary Bone Defect,R687.3
  8. The Designand Implementation of High Availability Call Center Based on Two-Node Cluster Technology,TN99
  9. Research on Extrusion and Drawing Process of Pure Magnesium Thin-walled Tube and Biological Corrosion,TG379
  10. Observational Study of a New Treatment Proposal for Severe Intrauterine Adhesions.,R711.74
  11. Mainland China \,J905
  12. Construction of Recombinant Turkey Herpesvirus Expressing Haemagglutinin of H5 Subtype of Avian Influenza Virus in US2 and US10 Regions and Comparison of Immune Effects of Two Recombinant Viruses,S852.5
  13. Damping Capacity and Mechanical Property of Pure Mg Processed by Equal Channel Angular Pressing,TG379
  14. Research on Drawing Process of Pure Magnesium Wire and Corrosion Behavior in Simulated Body Fluid,TG359
  15. Study on the Preparation of Biodegradable PHBV Nanofibers Congeries,TB383.1
  16. Expression and Purification of HA、NA Gene of Avian Influenza Virus Subtype H5N1 Isolated in Henan,S852.65
  17. Isolation and Identification of Subtype H9N2 via & Genetic Variability of HA and NA Gene of H9N2,S852.65
  18. Jiayuguan City Newcastle disease serological surveys,S858.31
  19. β-TCP 3D Perfusion Bioreactor for Proliferation and Osteogenic Differentiation of BMSCs,R329
  20. Pure magnesium wire extrusion and drawing process optimization and the impact on biological corrosion,TG359
  21. The Chicken Embryo Intestinal Cells Culture and the Effect of Probiotics on NDV,S852.6

CLC: > Medicine, health > Basic Medical > Medical science in general > Biomedical Engineering > General issues > Biomaterial
© 2012 www.DissertationTopic.Net  Mobile